Readme template updated 10 March 2004 File name: 73P6112 FW Readme.txt **************************************************************** | | | | | Build ID: 77101223.0105030301 | | Revision: 2 | | | | (C) Copyright International Business Machines Corporation | | xxxx, 2004. All rights reserved. | | | | US Government Users Restricted Rights -- Use, duplication | | or disclosure restricted by GSA ADP Schedule Contract with | | IBM Corp. | | | | Note: Before using this information and the product it | | supports, read the general information under "NOTICES AND | | TRADEMARKS" in this document. | | | | Updated | **************************************************************** CONTENTS 1.0 About this readme file 2.0 Change history 3.0 Installation and Setup Instructions 4.0 Configuration Information 5.0 Unattended Mode 6.0 Web sites and phone support 6.1 Web sites 6.2 Software service and support 6.3 Hardware service and support 7.0 Notices and trademarks 8.0 Disclaimer 1.0 ABOUT THIS README FILE -------------------------- This readme file contains information on downloading firmware to the JS20 Fibre Channel adapter on a JS20 server blade. Only PN 73P6112 is supported by this firmware download at this time. 2.0 CHANGE HISTORY ------------------ 10/07/2004 - FCode version 1.04 being released to address problem when Boot devices not showing up. 10/19/2004 - FCode version 1.05 released to address version level not showing up correctly in the firmware header information. This condition could lead an AIX customer to see an FCode version level of 1.03 even after version 1.04 is loaded. Version 1.05 corrects this condition and AIX customers will see version level 1.05 after the update occurs. 3.0 Installation and Setup Instructions (Please provide if product requires this information) ----------------------------------------- 3.1 Step by step instructions for this code update There are two methods for downloading firmware to the adapter: either by running the diagnostics service aid from a system installed with AIX or by using the Service Diagnostics CD. Note that LINUX customers must download the firmware using the Service Diagnostics CD. The CD iso image is available from IBM at the following website: http://techsupport.services.ibm.com/server/mdownload. Once the Service Diagnostics CD is installed, the firmware file for the Fibre Channel adapter must be burned onto a CD before the file can be downloaded to the adapter. The firmware file can be obtained at the following website: http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-54949 The following steps are used to create an iso image of the firmware file on a CD: cd /tmp mkdir qlogic Copy the firmware image from the download site to /tmp/qlogic From /tmp type the following command to make an ISO image. [mkisofs -r -U -o qlogic.iso /tmp/qlogic] You should see qlogic.iso file in /tmp. ftp the file to a PC that has the capability to create a CD from an ISO image. Follow the next steps whether firmware is to be downloaded while AIX is installed, or if the Service Diagnostics CD is used (iso image of firmware created on CD). The service aid provides a way to copy microcode to an adapter or device. The service aid presents a list of adapters and devices that use microcode. After the adapter or device is selected, the service aid provides menus to guide you in checking the current level and installing the needed microcode. This task can be run directly from the dcommand line. Microcode Installation to Adapters and Devices For many adapters and devices, microcode installation occurs and becomes effective while the adapters and devices are in use. It is recommended that a current backup be available and the installation be scheduled during a non-peak production period. Notes: If the source is /etc/microcode, the image must be stored in the /etc/microcode directory on the system. If the system is booted from a NIM server, the image must be stored in the usr/lib/microcode directory of the SPOT the client is booted from. If the source is CD (cdX), the CD must be in ISO 9660 format. There are no restrictions as to what directory in which to store the image. If the source is diskette (fdX), the diskette must be in backup format and the image stored in the /etc/microcode directory. common syntax: diag [-c] -d -T "download [-s {/etc/microcode|}] [-l {latest|previous}] [-f]" Flag Description -c No console mode. Run without user interaction. -d Run the task on the device or adapter specified. -T download Install microcode. -s /etc/microcode Microcode image is in /etc/microcode. -s Microcode image is on specified source. For example, fd0, cd0. -l latest Install latest level of microcode. This is the default. -l previous Install previous level of microcode. -f Install microcode even if the current level is not on the source. 3.2 Other: ex. Installing the firmware on this code update or any other code related. NA 4.0 Configuration Information (Please provide if product requires this information) ------------------------------- 4.1 Include any configuration installation NA 4.2 Configuration Settings NA 4.3 Hardware Status and Information NA 5.0 Unattended Mode (Please provide if product requires this information) ------------------------------- Note: Include switch and response file documentation. All updates should be capable to be run in an "unattended" mode. 5.1 Steps for unattended mode. ex: run "setup.exe -us" for the english version ex: run "setup.exe -jp" for the japanese version ex: boot.com -us for the english version edited in a:\autoexec.bat ex: setup.exe ------------------------------- NA Information and assistance is available through the IBM Web site and by phone. 6.1 Web sites IBM Support Web Site: http://www.ibm.com/pc/support/ IBM eServer Web site: http://www.ibm.com/eserver/xseries/ IBM IntelliStation Web site: http://www.ibm.com/pc/intellistation/ 6.2 Software service and support -------------------------------- Through IBM Support Line, you can get telephone assistance, for a fee, with usage, configuration, and software problems with xSeries servers, IntelliStation workstations, and appliances. For information about which products are supported by Support Line in your country or region, go to http://www.ibm.com/services/sl/products/. For more information about Support Line and other IBM services, go to http://www.ibm.com/services/, or go to http://www.ibm.com/planetwide/ for support telephone numbers. In the U.S. and Canada, call 1-800-IBM-SERV (1-800-426-7378). 6.3 Hardware service and support -------------------------------- You can receive hardware service through IBM Services or through your IBM reseller, if your reseller is authorized by IBM to provide warranty service. Go to http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S. and Canada, call 1-800-IBM-SERV (1-800-426-7378). In the U.S. and Canada, hardware service and support is available 24 hours a day, 7 days a week. In the U.K., these services are available Monday through Friday, from 9 a.m. to 6 p.m. 7.0 NOTICES AND TRADEMARKS INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. IBM, the e-business logo, eServer, IntelliStation, xxx, and xxx are trademarks of the IBM Corporation in the United States, other countries, or both. ****************************************************************** The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both: e-business logo eServer IBM IntelliStation xxx xxx ****************************************************************** Intel, MMX, and Pentium are trademarks of Intel Corporation in the United States, other countries, or both. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Adaptec and HostRAID are trademarks of Adaptec, Inc., in the United States, other countries, or both. Red Hat, the Red Hat "Shadow Man" logo, and all Red Hat-based trademarks and logos are trademarks or registered trademarks of Red Hat, Inc., in the United States and other countries. Other company, product, or service names may be trademarks or service marks of others. 8.0 Disclaimer (Required) ---------------------------- 8.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 8.2 Note to Government Users Include the following note after the disclaimer paragraph. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.