Drivers / Client tools for IBM High Rate Wireless LAN PC Card (P/N 09N9863, 09N9904, and 09N9906) for Windows 98.

File Contents:
--------------
This self extracting EXE file contains the drivers, client tools, and firmware
for the IBM High Rate Wireless LAN PC Card.

Installation instructions
-------------------------

1. Use Windows Explorer to find the WIN98WL.EXE file that was downloaded and double click on it.  Make sure the file was downloaded into the intended install directory, usually C:\wlan. An extraction window may appear. If it dose click on the "EXTRACT" button.  NOTE (If a window "Create C:\wlan directory?" appears, Click YES).  Make sure  default directory is  C:\wlan this is where you want  the file to extract itself into.  If you chose to extract to another directory, use that directory in the following instructions instead of "C:\wlan".  Follow instructions below for each task you wish to do:



If you need to install the client tools:

	1) Click "Start" > "RUN" > in Box provided,(type "c:\wlan\setup.exe")
	2) Click  "OK"	Installation of the client software should start. 
	   Follow the instructions presented on the screen.


If you need to install the card / drivers:
	
	Note: Before installing the Card/Drivers, ensure that the Client Software
	has been installed Properly.

	1) Insert IBM High Rate Wireless LAN PC Card into Laptop.
	2) When card is detected, Follow installation procedure presented
	   on the screen. NOTE: When asked for manufacturer disk, point installation
	   at "C:\wlan" directory. If you have any further questions. You can download
	   complete documentation at http://www.pc.ibm.com/support

	When the driver installation is complete, you must enter a network name.
	Please see your system administrator for your network name. Open the 
	Client manager window, click edit profile button and enter the network
	name in the box.
	
	
If you need to update the firmware:
	1) Click "Start" > "RUN" > in Box provided,(type "c:\wlan\Wsu10616.exe")
	2) Click  "OK"	Installation of the Firmware should start. 
	   Follow the instructions presented on the screen.