v5.0 Drivers Software Release for IBM 10/100 Ethernet Server and Desktop Adapters family ============================================================ Windows 2000 Drivers Package with v5.40.11.0000 NDIS5 driver. CONTENTS -------- 1.0 Overview 1.1 Limitations 2.0 Change History 3.0 Build and Installation Instructions 4.0 Configuration Information 4.1 Driver Parameters 4.2 Additional Configuration Information 5.0 Web Sites and Support Phone Number 6.0 Trademarks and Notices 7.0 License and Disclaimer 1.0 Overview _____________ This package includes the W2K ndis5 driver ver 5.40.11.0000 for all IBM Intel-based 10/100 Ethernet Server and Desktop Adapters and LOMs, including the latest IBM 10/100 Ethernet Server Adapter PN 06P3601, IBM Desktop Adapter PN 22P4501, and IBM 10/100 Dual Port Server Adapter PN 22P4901. The 5.40.11.0000 driver is fully Microsoft certified with official Digital Signature CAT file. 1.1 Limitations ----------------- There is no known limitation. Note that the Adapter Failover ( Teaming ) software is only applicable to the Server Adapters. 2.0 Change History ____________________ This new v5.0 sw release replaces the previous v4.0 or older sw release. Version history: v5.0 E100BNT5.SYS 5.40.11.0000 v4.0 E100BNT5.SYS 5.00.67.0000 v3.72 IBMFENT5.SYS 4.02.35.0000 Note: Starting with v4.0 sw release, IBM 10/100 Ethernet Adapters sw shares the same drivers names with the Intel retail sw for Intel PRO/100 Adapters family. 3.0 Build and Installation Instructions _________________________________________ 1) Make sure the adapter is physically installed in your server or work station prior to installing the driver software. 2) Verify that your system is properly installed with Windows 2000 OS. 3) After logging in to W2K, W2K will detect the adapter with the W2K Wizard window. Click Next. 4) Select Search, then click Next. 5) In the Locate Driver window, select the floppy drive box or CD-ROM if you are using the sw CD-ROM, then click Next. 6) Click Next. 7) Click OK to start the drivers copying and installing process. 8) Click Finish. 9) Install PROSet2 Adapter Properties Utility program 10) Note: If you are installing multiple adapters and want to set up Failover Team, go to PROSet2, Right Click on one of the adapters and follow the steps there to create a Team. With W2K, PROSet2 is not installed automatically with Drivers sw install. To install PROSet 2, go to the PROset2 directory and run Setup.exe. 4.0 Configuration Information _______________________________ After following 3.0 above, your adapter should be all set to go. If you need further details, please see the guide.pdf and other Hints and Tips available from IBM support web. See Web information in 5.0 section below. 4.1 Driver Parameters --------------------- Refer to 4.0 above. 4.2 Additional Configuration Information ---------------------------------------- Refer to 4.0 above. 5.0 WEB Sites and Support Phone Number ________________________________________ IBM Support Web Site: http://www.ibm.com/pc/support Select Options then Ethernet Adapters then PCI. IBM Marketing Netfinity Web Site: http://www.ibm.com/pc/netfinity ( or eServer xSeries ) If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers URL: http://www.ibm.com/pc/qtechinfo/YAST-3P2QLY.html. 6.0 Trademarks and Notices ____________________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM Netfinity eServer xSeries Intel is a registered trademark of Intel Corporation. Other company, product, and service names may be trademarks or service marks of others. 7.0 License and Disclaimer ___________________________ Copyright (c) 2000-2001, IBM Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of IBM Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.