IBM ThinkPad                                           April 28, 2000
Video Features(SavageIX8) for Windows 95/98

Version 7.03.01
=====================================================================

Notice:
-------
This program is language independent and can be used with any language
system.


What This Package Does
----------------------
This package provides the video driver for Windows 95/98 users.

The video driver enables or updates the video function of the
following ThinkPad system:
  - ThinkPad T20

To determine if you have to update the display driver or not, refer
to the "Summary of Changes" section.

To update the display driver, refer to the "Installation Guide" section.


Released Versions
-----------------
Version 7.02.89  Initial release
Version 7.03.01  Minor fix

Summary of Changes
------------------
Where: <n.nn>  Package version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function
<7.02.93>
-(Fix) Overlay scaling mismatch on Tv if do Fn+F8 for DVD PB
<7.03.01>
-(Fix) A part of Help was Modified.
-(Fix) TV mode gets Disabled after returning from DOS Full Screen


Installation instructions for Windows 98/95 OSR2.x
--------------------------------------------------
 1. Start Windows 98 or Windows 95 OSR2.x
 2. Extract the drivers to the hard drive.
 3. Click on 'Start' then click on 'Run...'
 4. In the Run dialog window, type "C:\DRIVERS\W9X\DISPLAY\SETUP" to
    install the video driver. Click OK to start the installation process.
    If you extracted the files to a different location, specify that
    location instead.
 5. Follow the instructions on the screen.

To uninstall the S3 driver (and utilities, if installed):
 1. From the Control Panel, double-click on the Add/Remove Programs icon.
 2. Select the "SavageIX" item in the listbox.
 3. Click the Add/Remove button to remove the display driver.  The utilities
    should be removed as well if they were installed with the driver.

Note:
  A user can uninstall under all modes without requiring the user to
  return to VGA mode manually.  If necessary, the Uninstall procedure
  will reset the system to VGA. Upon completion of the UnInstall, the
  system will be in the VGA mode.


Installation instructions for Windows 95 OSR0 and OSR1
------------------------------------------------------
Since the Setup.exe, InstallShield does not work with Windows 95 OSR0/1
do the following

<Clean installation>
 1. Start Windows 95.
 2. Extract the drivers to the hard drive.
 3. Click 'Start', point to 'Settings', then click 'Control Panel'.
 4. Double-click the System icon.
 5. Click the Device Manager tab.
 6. Expand 'Display Adapters'
 7. If there is a 'S3' only adapter, remove it.
 8. At the 'Confirm Device Removal' window, click 'OK'.
 9. At the 'Restart confirmation message' window, click 'NO'.
10. Expand 'Other Devices' section and remove 'PCI VGA-Compatoble Display
    Adapter'.
10. At the 'Confirm Device Removal' window, click 'OK'.
11. At the 'PCI VGA-Compatible Display Adapter Has a ROM' window,
    click 'Test'.
12. Shutdown and restart the system.
13. When the system starts, the 'New Hardware Found' window appears.
    Put check mark in 'Driver from disk provide by hardware manufacturer.
    Click on 'OK'.
14. Specify the directory where the diver files were extracted and
    click 'OK'.
15. At the 'System Settings Change' window, click 'YES' to restart the
    system.

<Overwrite installation>
 1. Start Windows 95.
 2. Extract the drivers to the hard drive.
 3. Click 'Start', point to 'Settings', then click 'Control Panel'.
 4. Double-click the System icon.
 5. Click the Device Manager tab.
 6. Expand Display Adapters.
 7. Select 'S3 Inc. Savage/IX w/MV' and click the Properties' buttons.
 8. Select the 'Driver' Tab.
 9. Click the 'Change Driver...' button.
10. Click the 'Have Disk...' button.
11. Specify the directory where the diver files are extracted and
    click 'OK'
12. At the 'Select Device' window, select 'S3 Inc. Savage/IX w/MV' and
    click 'OK'
13. At the 'S3 Inc. Savage/IX w/MV' window, click 'OK'.
14. At the 'Insert Disk' window, click 'OK'.
15. Specify the directory where the diver files are extracted and
    Click on 'OK'
16. At the 'System Settings have changed window, click 'Yes' to
    restart the system.


Determining which version is installed
--------------------------------------
 1. Boot Windows 95/98.
 2. Click on the 'Start' button.
 3. Move the cursor to the 'Settings' then click on the 'Control Panel'.
 4. Double-click on the 'Display' icon.
 5. Select the 'Settings' tab.
 6. Click on the 'Advanced...' button.
 7. Select the 'S3duovue' tab.
 8. click information button and Check version information.
    For example, 4.11.01.7008-7.03.01

Windows 95 (Retail Version, Service Pack 1)
 1. Boot Windows 95.
 2. Click on 'Start' -> 'Settings' -> 'Control Panel'.
 3. Double-click on the 'Display' icon.
 4. Select the 'S3duovue' tab.
 5. click information button and Check version information.
    For example, 4.11.01.7008-7.03.01


Trademarks
----------
  * IBM and ThinkPad are registered trademarks of IBM Corporation.
  * Windows is a registered trademark of Microsoft Corporation.

  Other company, product, and service names may be registered
  trademarks, trademarks or service marks of others.