IBM ARTIC960 Support for OS/2 Version 1.2.2 TABLE OF CONTENTS ----------------- 1. Product Specifications - Overview - ARTIC Adapters Supported - Software Requirements - Storage Requirements - Latest Software Updates - Related Publications 2. Download the Package File to the Target System 3. Components of the Downloaded File 4. Product Installation 5. Version History 6. Support Information 7. Notices 8. Trademark List 1. Product Specifications Overview -------- The IBM ARTIC960 Support for OS/2, Version 1.2.2, contains the following: - Install/Update files - Realtime kernel and its supplied subsystems - Realtime debug kernel - ARTIC960 Trace facility support - Driver and subsystem modules to support OS/2 For: ARTIC960 MCA, ARTIC960 PCI, ARTIC960Rx PCI, ARTIC960Hx PCI, and ARTIC960Rx Frame Realy PCI adapters - Diagnostics For: ARTIC960Rx/Hx PCI PMC Bus 4-Port and PMC T1/E1 and ARTIC960Rx Frame Relay PCI PMC Bus 2-Port and ARTIC960 MCA/PCI CFE Bus 4-Port and 8-Port daughter boards - ARTIC960 PMC Bus support - ARTIC960 STREAMS subsystem support - ARTIC960 Cross-Bus support ARTIC Adapters Supported ------------------------ - IBM ARTIC960 MCA Co-Processor - IBM ARTIC960 PCI Co-Processor - IBM ARTIC960Rx PCI Adapter - IBM ARTIC960Hx PCI Adapter - IBM ARTIC960Rx Frame Relay PCI Adapter Software Requirements --------------------- - IBM Operating System/2, OS/2 Warp (Version 4.0) - IBM Operating System/2, OS/2 Warp (Version 3.0) - IBM Operating System/2, OS/2 Warp Connect (Version 3.0) - IBM Operating System/2, OS/2 SMP (Version 3.0) Storage Requirements -------------------- - System Unit - ARTIC960 Support for OS/2 (file system requires 2.0 MB) - On-Card - Approximately 600 KB of on-card memory space is required to load the kernel and the supplied subsystem files onto the adapter. This estimate assumes the use of configuration defaults and two adapters configured for peer-to-peer communications. Depending on your particular configuration, the 600 KB estimate may increase or decrease. In addition to the on-card storage stated, sufficient memory space must be available on the co-processor adapter to run your application. Latest Software Updates ----------------------- - The latest software updates can be downloaded from the Web at: http://www.radisys.com/products/artic/ibm/ Related Publications -------------------- - IBM ARTIC960 MCA Guide to Operations - IBM ARTIC960 PCI Guide to Operations - IBM ARTIC960Rx PCI Adapter Guide to Operations - IBM ARTIC960Hx PCI Adapter Guide to Operations - IBM ARTIC960Rx Frame Relay PCI Adapter Guide to Operations Publications can be obtained from the Web at: http://www.radisys.com/products/artic/ibm/ 2. Download the Package File to the Target System a. Download the self-extracting file 9OS122O.EXE to a temporary subdirectory. b. Uncompress the package file by typing: 9OS122O x (where x is the temporary directory) 3. Components of the Downloaded File README.1ST Read me first LICENSE.ADD License Agreement LICENSE.PLA Program License Agreement R9OS122O.TXT Product information I9OS122O.TXT Installation instructions RUN_READ.ME File describing the files in this image INST_RUN.CMD Run-Time Package Installation Program KERNLD0.CFG Configuration file for loading card 0 KERNLD1.CFG Configuration file for loading card 1 KERNLDS.CFG Configuration file for loading card 0 and card 1 KDEVLD0.CFG Configuration file for loading card 0 (Development Kernel) KDEVLD1.CFG Configuration file for loading card 1 (Development Kernel) KDEVLDS.CFG Configuration file for loading cards 0 and 1 (Development Kernel) RIC.MSG Message file RICCNFG.EXE Configuration utility RICDUMP.EXE Dump utility RICH.MSG Help message file RICINIT.CMD Initialization command file RICINITD.CMD Initialization command file (uses Development Kernel) RICIO16.SYS OS/2 device driver RICIO32.DLL OS/2 dynamic link routines RICLOAD.EXE Application loader utility RICMBX.CFG Mailbox configuration file RICMBX32.DLL OS/2 dynamic link routines RICMBX32.EXE Mailbox process RICRESET.EXE Reset utility RICROMUP.EXE ROM update utility RICRTASK.REL ROM update utility support RICSTAT.EXE Status utility RICDIAG.EXE Diagnostic utility JDC2.REL Diagnostic Control (PMC Cards) JDC.DGX Diagnostic Control (CFE Cards) AIB10010.DGX CFE Bus 4-Port Diagnostics AIB10020.DGX CFE Bus 8-Port Diagnostics P0871014.DGR PMC Bus 4-Port Diagnostics P0F81014.DGR PMC Bus 2-Port Diagnostics P0B91014.DGR PMC Bus T1/E1 Diagnostics RIC_BASE.REL Base device driver RIC_KERN.REL Kernel RIC_KDEV.REL Development Kernel RIC_MCIO.REL System Bus I/O subsystem RIC_SCB.REL Subsystem Control Block subsystem RIC_PCI.REL On-Card PMC Bus Driver RIC_OSS.REL On-card STREAMS subsystem RIC_ESS.REL Cross-Bus driver RICCLASS.TRC Trace utility classes RICFMTTR.EXE Trace format utility RICGETTR.EXE Get trace utility RICSETTR.EXE Set trace utility SYSLEVEL.JUN Operating System/2 syslevel file 4. Product Installation See the installation instructions in file I9OS122O.TXT. 5. Version History 1.2.2 - Support for the IBM ARTIC960Rx Frame Relay PCI Adapter 1.2.1 - General fixes and performance enhancements - Cross-Bus support and diagnostics - Support for the ARTIC960Rx PCI Adapter running in an IBM Industrial Computer Model 7588 (7588RP.SYS) available through the IBM ARTIC Developer's Assistance Program (DAP) (call 1-561-443-7984). 1.2.0 - ARTIC960 Support for OS/2 requires OS/2 Version 3.x or later. - Provides support for ARTIC960Rx PCI and ARTIC960Hx PCI adapters - Provides support for PMC daughter cards - Provides new performance enhancement options - Provides two versions of the ARTIC960 kernel (run time and development) 1.1.1 - Provides ARTIC960 Data Cache support - Provides On-card STREAMS support 6. Support Information IBM ARTIC Technical Support Desk (USA and Canada): call 1-800-237-5511 and at the Voice Response Unit enter "0" (ignore all other options). IBM ARTIC Technical Support Desk for all other locations, call your IBM country specialists. 7. Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. 8. Trademark List The following terms are trademarks of the IBM Corporation in the United States or other countries, or both: IBM Micro Channel PS/2 Personal System/2 OS/2 Operating System/2 AIX RISC System/6000 C Set ++ Macro Assembler/2 Portmaster Proprinter IBM VisualAge C++ Other company, product, and service names may be trademarks or service marks of others. C-bus is a trademark of Corollary, Inc. in the United States, other countries, or both. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. PC Direct is a trademark of Ziff Communications Company in the United States, other countries, or both and is used by IBM Corporation under license. ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks of Intel Corporation in the United States, other countries, or both. (For a complete list of Intel trademarks, see www.intel.com/tradmarx.htm) UNIX is a registered trademark in the United States, other countries, or both and is licensed exclusively through X/Open Company Limited. SET and the SET Logo are trademarks owned by SET Secure Electronic Transaction LLC. (For further information, see www.setco.org/aboutmark.html)