Patch Name: PHSS_11795 Patch Description: s700_800 10.X OmniBackII A.02.50 patch Creation Date: 97/08/21 Post Date: 97/09/04 Hardware Platforms - OS Releases: s700: 10.00 10.01 10.10 10.20 s800: 10.00 10.01 10.10 10.20 Products: OmniBackII A.02.50 Filesets: OMNIBACK-II.OMNI-CC OMNIBACK-II.OMNI-CC-P OMNIBACK-II.OMNI-CORE OMNIBACK-II.OMNI-CS OMNIBACK-II.OMNI-MA-P OMNIBACK-II.OMNI-SAP-P OMNIBACK-II.OMNI-ACS-P OMNIBACK-II.OMNI-DAS-P Automatic Reboot?: No Status: General Release Critical: No Path Name: /hp-ux_patches/s700_800/10.X/PHSS_11795 Symptoms: PHSS_11795: 1. MMD sometimes coredumped. 2. Omniwriteascii_old program sometimes coredumped during "Exporting messages...". 3. Reconnect reported IPC error during preview backup. 4. omniminit, omnimm, omnimverify, omnimcopy failed if option -slot SlotID side was used. 5. Timeout of GUI/CLI queries during hot-backup check. 6. dbsm timeout when omnidbcheck running. 7. After upgrade from A.02.10 the backup performance became slightly slower. 8. SAP Installation to AIX 4.1 failed with error that "require.dat" is missing. 9. OmniBack II could not use exclusive lock on optical devices configured in LUN mode. 10. With command omnimm -modify_pool and -modify_mag_pool parameter AgeLimit was not modified. 11. SAP raw backup did not use "load balancing" properly if SAP partition was bigger than 2GB. 12. It was not possible to restore with omnir parallel restore objects of different type (SAP, RAW or FS). 13. omnir reported "Unrecognized option ..." if option "-full" was used in parallel restore. 14. omnistat did not report complete information about object if object was WinFS. 15. Restore GUI sometimes core dumped if it was started with "-debug" option. 16. OmniBack reported "internal error" if OB2 media were ejected - it did not cause any DB corruption. 17. Barcode of the medium is not shown as part of OB2 label. 18. MM GUI coredumped if more than 500 tapes were in the pool. 19. Restore GUI failed to run full restore. 20. OB2 deamons could not be started after restore of OB2 database if /var/opt/omni/db/syslog directory was not created. 21. Installation failed without any error if install terminal could not be opened. 22. OmniBack II did not properly exclude mount-points that were below the mount-point tree during HOST backup. 23. Preview backup of the OmniBack II DB was aborted. 24. omnimm -list_media for media in another cell reported incorrect message "Can not remove OmniBack II medium". 25. OB2 created and left SmOptions_files in /var/opt/omni/tmp directory during Oracle, Sybase, Informix and SAP backups. 26. Search for files in OB2DB failed with "Internal error". Defect Description: PHSS_11795: 1. MMD crashed when more than one psm session was running. 2. omniwriteascii_old program coredumped during "Exporting messages...", if the amount of session messages was extremely big. 3. Reconnect did not properly work during session preview. 4. omniminit, omnimm, omnimverify, omnimcopy did not work if option -slot SlotID side was used. 5. Timeout of GUI/CLI queries during hot-backup check. 6. dbsm timeout when omnidbcheck running. 7. Performance was worse in comparison to OmniBack II A.02.10 - additional bus reset checking descreased backup performances. 8. SAP Installation did not work to AIX 4.1 because require.dat file was missing. 9. OmniBack II could not use exclusive lock on optical devices when configured in LUN mode. 10. With command omnimm -modify_pool and -modify_mag_pool parameter AgeLimit was not been modified. 11. SAP raw backup did not use "load balancing" properly if SAP partition was bigger than 2GB. 12. It was not possible to restore with omnir parallel restore objects of different type (SAP, RAW or FS). 13. omnir did not recognize option "-full" in parallel restore. 14. omnistat did not report complete information about object if object was WinFS. 15. Restore GUI sometimes core dumped if it was started with "-debug" option. 16. OmniBack reported "internal error" if OB2 media were ejected - it did not cause any DB corruption. 17. If a medium with barcode was initialized on non-barcode device then the rescan on a device with barcode did not add the barcode to the label. 18. MM GUI coredumped if more than 500 tapes were in the pool. 19. Restore GUI failed to construct full restore chain if detail catalog information was missing or purged for any session in the chain. 20. OB2 deamons could not be started if syslog directory was not created after restore of OB2 database. Now it is created automatically before start of OB2 deamons. 21. OmniBack II did not report any error message if install terminal could not be opened. 22. OmniBack II did not properly exclude mount-points that were below the mount-point tree. 23. Preview backup of the OmniBack II DB was aborted. 24. omnimm -list_media for a media in another cell reported did not report the right message. 25. OB2 created and did not remove SmOptions_ files during Oracle, SAP, Sybase and Informix backup. 26. Search for files in OB2DB failes because OB2 did not properly check obsolete file versions. SR: 5003376632 Patch Files: /opt/omni/lib/libob2emmdb.sl /opt/omni/lib/libob2ecmn.sl /opt/omni/lib/libob2ecdb.sl /opt/omni/sbin/omnisv.sh /opt/omni/sbin/install/omniwriteascii_old /opt/omni/lbin/bsm /opt/omni/lbin/rsm /opt/omni/lbin/dbbda /opt/omni/lbin/crs /opt/omni/databases/vendor/ma/hp/s800/hp-ux-10/A.02.50/ packet.Z /opt/omni/databases/vendor/sap/hp/s800/hp-ux-10/A.02.50/ packet.Z /opt/omni/databases/vendor/sap/ibm/rs6000/aix/require.dat /opt/omni/databases/vendor/cc/hp/s800/hp-ux-10/A.02.50/ packet.Z /opt/omni/databases/vendor/cc/hp/s800/hp-ux/A.02.50/packet.Z /opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.02.50/ packet.Z /opt/omni/databases/vendor/das/hp/s800/hp-ux-10/A.02.50/ packet.Z /opt/omni/databases/vendor/acs/hp/s800/hp-ux-10/A.02.50/ packet.Z /opt/omni/bin/omnimm /opt/omni/bin/omnir /opt/omni/bin/omnistat /opt/omni/bin/xomnimm /opt/omni/bin/xomnirestore /opt/omni/bin/xomniadmin /opt/omni/bin/omniminit what(1) Output: /opt/omni/lib/libob2emmdb.sl: None /opt/omni/lib/libob2ecmn.sl: None /opt/omni/lib/libob2ecdb.sl: None /opt/omni/sbin/omnisv.sh: None /opt/omni/sbin/install/omniwriteascii_old: [TZ=GMT0 /opt/omni/sbin/install/omniwriteascii_old -version] HP OpenView OmniBack II A.02.50: WRITEASCIIOLD, inte rnal build 438, built on Fri Jul 25 13:39:50 1997 /opt/omni/lbin/bsm: [TZ=GMT0 /opt/omni/lbin/bsm -version] HP OpenView OmniBack II A.02.50: BSM, internal build 438, built on Fri Jul 25 10:31:39 1997 /opt/omni/lbin/rsm: [TZ=GMT0 /opt/omni/lbin/rsm -version] HP OpenView OmniBack II A.02.50: RSM, internal build 438, built on Fri Jul 25 10:31:47 1997 /opt/omni/lbin/dbbda: [TZ=GMT0 /opt/omni/lbin/dbbda -version] HP OpenView OmniBack II A.02.50: DBBDA, internal bui ld 438, built on Wed Jul 16 10:04:41 1997 /opt/omni/lbin/crs: [TZ=GMT0 /opt/omni/lbin/crs -version] HP OpenView OmniBack II A.02.50: CRS, internal build 438, built on Wed Aug 13 10:08:30 1997 /opt/omni/databases/vendor/ma/hp/s800/hp-ux-10/A.02.50/ packet.Z: None /opt/omni/databases/vendor/sap/hp/s800/hp-ux-10/A.02.50/ packet.Z: None /opt/omni/databases/vendor/sap/ibm/rs6000/aix/require.dat: None /opt/omni/databases/vendor/cc/hp/s800/hp-ux-10/A.02.50/ packet.Z: None /opt/omni/databases/vendor/cc/hp/s800/hp-ux/A.02.50/ packet.Z: None /opt/omni/databases/vendor/cc/hp/s800/hp-ux-1020/A.02.50/ packet.Z: None /opt/omni/databases/vendor/das/hp/s800/hp-ux-10/A.02.50/ packet.Z: None /opt/omni/databases/vendor/acs/hp/s800/hp-ux-10/A.02.50/ packet.Z: None /opt/omni/bin/omnimm: [TZ=GMT0 /opt/omni/bin/omnimm -version] HP OpenView OmniBack II A.02.50: OMNIMM, internal bu ild 438, built on Fri Aug 8 09:19:43 1997 /opt/omni/bin/omnir: [TZ=GMT0 /opt/omni/bin/omnir -version] HP OpenView OmniBack II A.02.50: OMNIR, internal bui ld 438, built on Mon Jul 28 17:11:56 1997 /opt/omni/bin/omnistat: [TZ=GMT0 /opt/omni/bin/omnistat -version] HP OpenView OmniBack II A.02.50: OMNISTAT, internal build 438, built on Fri Jul 4 15:37:01 1997 /opt/omni/bin/xomnimm: [TZ=GMT0 /opt/omni/bin/xomnimm -version] HP OpenView OmniBack II A.02.50: XOMNIMM, internal b uild 438, built on Tue Jul 15 15:44:45 1997 /opt/omni/bin/xomnirestore: [TZ=GMT0 /opt/omni/bin/xomnirestore -version] HP OpenView OmniBack II A.02.50: XOMNIRESTORE, inter nal build 438, built on Fri Jul 4 14:40:48 1997 /opt/omni/bin/xomniadmin: [TZ=GMT0 /opt/omni/bin/xomniadmin -version] HP OpenView OmniBack II A.02.50: XOMNIADMIN, interna l build 438, built on Fri Jul 4 16:55:29 19 97 /opt/omni/bin/omniminit: [TZ=GMT0 /opt/omni/bin/omniminit -version] HP OpenView OmniBack II A.02.50: OMNIMINIT, internal build 438, built on Mon Jul 28 17:12:01 199 7 cksum(1) Output: 3256458827 598708 /opt/omni/lib/libob2emmdb.sl 796174665 640182 /opt/omni/lib/libob2ecmn.sl 823932011 688801 /opt/omni/lib/libob2ecdb.sl 2109097810 9534 /opt/omni/sbin/omnisv.sh 1668240464 1124781 /opt/omni/sbin/install/omniwriteascii_old 902043015 998142 /opt/omni/lbin/bsm 582653961 805294 /opt/omni/lbin/rsm 2996291023 279610 /opt/omni/lbin/dbbda 3414507757 743870 /opt/omni/lbin/crs 3530867013 1699865 /opt/omni/databases/vendor/ma/hp/s800/ hp-ux-10/A.02.50/packet.Z 2267534098 782979 /opt/omni/databases/vendor/sap/hp/s800/ hp-ux-10/A.02.50/packet.Z 60182770 17 /opt/omni/databases/vendor/sap/ibm/rs6000/aix/ require.dat 88089007 8727483 /opt/omni/databases/vendor/cc/hp/s800/ hp-ux-10/A.02.50/packet.Z 1870075351 8578183 /opt/omni/databases/vendor/cc/hp/s800/ hp-ux/A.02.50/packet.Z 4190721297 15643846 /opt/omni/databases/vendor/cc/hp/s800/ hp-ux-1020/A.02.50/packet.Z 607068767 1542283 /opt/omni/databases/vendor/das/hp/s800/ hp-ux-10/A.02.50/packet.Z 2565340117 2068395 /opt/omni/databases/vendor/acs/hp/s800/ hp-ux-10/A.02.50/packet.Z 1148961628 328598 /opt/omni/bin/omnimm 2463997099 406630 /opt/omni/bin/omnir 2772923680 275350 /opt/omni/bin/omnistat 1384103741 1310884 /opt/omni/bin/xomnimm 931478008 1356359 /opt/omni/bin/xomnirestore 850485383 1002312 /opt/omni/bin/xomniadmin 110375744 291693 /opt/omni/bin/omniminit Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: None Patch Package Size: 48820 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHSS_11795 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHSS_11795.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHSS_11795.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHSS_11795. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHSS_11795.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHSS_11795.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: SUBSYSTEM_SHUT "/opt/omni/sbin/omnisv.sh stop" must be executed on the cell server before swinstall is run. After the swinstall completes, restart OmniBackII using "/opt/omni/sbin/omnisv.sh start". NOTE * If during backup the Media Agent reports error message "Undefined TapeAlert flag" then to avoid the message include the following line OB2TAPEALERT=1 in the /opt/omni/.omnirc file on the respective backup media agent client. * The Cell Console, Disk Agent, Media Agent and/or any integration modules need to be redistributed to the appropriate systems from within the "Cell Administration - Install" window of the OmnibackII graphical user interface before the patch modifications take effect.