Patch Name: PHSS_7929 Patch Description: s700 10.20 second diagnostic patch Creation Date: 96/10/07 Post Date: 96/10/11 Hardware Platforms - OS Releases: s700: 10.20 Products: Diag-Sys-700 B.10.20 Sup-Tool-Mgr-700 B.10.20 Filesets: Diag-Sys-700.SUP-CORE-700 Diag-Sys-700.SCSI-DISK-700 Diag-Sys-700.DIAG-700-MIN Diag-Sys-700.SCSI-TAPE-700 Diag-Sys-700.SUPLICEN-700 Sup-Tool-Mgr-700.STM-SHLIBS Sup-Tool-Mgr-700.STM-UI-RUN Sup-Tool-Mgr-700.STM-UUT-700-RUN Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700/10.X/PHSS_7929 Symptoms: PHSS_7929: 1. SCSI_MUX fw_update tool: - Download will fail after first block is written. - Pass-through driver locking, unlocking and resetting has been removed. Date code feature has been added. 2. Download firmware to SCSI disk with firmware files larger than 256 KB will result in a download failure. 3. Added STM diagnostic support for NIO and EISA PSI cards. 4. In SCSI_MUX diagnose tool, all the error logs available are decoded and meaningful sentences are logged correspondingly in the failure log. 5. User would see Error Log data of SCSI_MUX info tool, if any, in Failure log and Warning Log in the activity log. 6. If no SCSI cards are in a SCSI MUX, the MUX does not show up in the map. 7. The SCSI disk expert tool will fail when an identify is done on approximately 40 blocks or more of a disk. Messages in the Activity Log will indicate that an error occurred during the open of a tlidsector file in /var/tmp. 8. All graphics devices will have a product qualifier of Graphics-Device. 9. Added support for the new SPU: 9000/7xx/V132L 9000/7xx/V160L 10. The CPU info module will panic certain systems. PHSS_7759: 1. When (70% of) the system available free memory drops to less than 1 megabytes, the memory exerciser will terminate with incomplete status. 2. Diagnostic programs terminates with the following error message on systems where root and dump are LVM, but swap is not: *** DIAGNOSTIC MONITOR COULD NOT GRANT ACCESS TO A DEVICE DUE TO FAILURE RETURNED FROM THE DIAGNOSTIC LIBRARY ROUTINE obtain_dev_type(DSSERR 667) *** A SYSTEM DEPENDENT INTERNAL ERROR WAS ENCOUNTERED. (DSSERR 5002) *** AN ERROR WAS RETURNED BY THE DIAGNOSTIC MONITOR IN RESPONSE TO A REQUEST TO OBTAIN ACCESS TO PDEV (0/12). (DSSERR 660) *** THE SPECIFIED DEVICE COULD NOT BE ALLOCATED FOR TESTING (DSSERR 2146) The "help pdev" command with sysdiag also fails with the following error message. *** A SYSTEM DEPENDENT INTERNAL ERROR WAS ENCOUNTERED. (DSSERR 5002) *** UNABLE TO DETERMINE THE IDENTITY OF PDEV (0/12). FURTHER HELP INFORMATION CANNOT BE OBTAINED. (DUIERR 372) 3. Enhancement in Support Tools diagnose scsi_dlt module. 4. a. The error rate computed in the Maximum Coverage test of the diag_dds diagnose tool does not reflect the correct rate for threshold determination. b. Running the diag_dds diagnose tool with more than one iteration and no user queries option fails with "Aborted Command" failure message. c. Enhancement to error decoding algorithm. 5. a. User is prompted each time upon tool start-up to enter the file name for the trace logs output. This make starting up the scsi_dds expert tool a cumbersome process. b. The "Channel Hang" flag in the EEPROM log can be either a bit flag or a byte flag depending on the EEPROM log format on the device. Currently, scsi_dds displays the "Channel Hang" flag as a byte format for both. 6. The "Help" command in the cstm interface for scsi_dds, scsi_dlt and scsi_lib expert tools do not work. 7. This patch contains the STM diagnostic support of the J2804A HP ATM adapter card. This card is delivered with the software product J2805AA. 8. When user ran the disk verifier on a SCSI (TEAC) floppy drive, the tool would return incomplete status and report that the disk was not supported by the disk verifier. 9. The graphics tools will hang when they are run on a system which is booted under CDE when no-one is logged into the console 10. In SCSIDSK2: Added support for Seagate ST32171N and IBM DORS- 32160 disks. Format unit times out when executed on large capacity drives. 11. Format Unit in SCSIDSK2 times out when executed on large capacity drives. 12. This is an enhancement in disk exerciser and disk verify tool to change message that shows user where to find more information in the case where he keeps getting "insert scratch disk" prompt. 13. Added support for HPC1537A DDS in SCSIDDS diagnostic. 14. - Added identification support for: 4X MO disks, FY96 GSY 2,4,9GB disks, Lear DDS, Timberline and Redwood Tape Libraries, DLT 4000, Edison Disk Array, Andronicus DDS. 15. Spelling error in message -- use "Selete" instead of "Select" in copyutil module. 16. Xstm will crash if a command file (which is run from xstm) attempts to write a file which already exists and the 'replace file' dialog is not disabled in the general options menu. Xstm will also crash while running a startup script if the support tool license of a system it is connecting to is going to expire within the next 20 days. Additionally, if device selection (ex: sel dev 3) is done in a command file that is executed from xstm, the selection will not generate an error but will not succeed in selecting the device. Command files executed from xstm via the run command file command, the -f option, and in a .stmrc file can all cause these problems. 17. The LAN Exerciser does not receive responses from the hosts specified in file /var/stm/config/tools/exercise/hosts.cfg. 18. The graphics devices will intermittently show up as UNKNOWN in the STM map when the system is booted CDE. When using STM for tool development, starting a tool under STM in debug does not work when the new DDE (Version 4.0) is installed. Hosts.cfg path name in Release Notes is wrong. Added enhanced information tool for LAN/Console Interface. Added SCSI MO icon 19. When a user runs the information tools' tape modules and then wants to look at the structure information log, they will get the addressses to the malloced space, not real device data. 20. This bug occurs in MSTM only. When an MSTM window appears that contains only scrolling text (text widget), and the user hits the "up arrow" or "down arrow" key to view the text, STM will crash. 21. When run without a terminal attached to any of standard input, standard output or standard error, STM fails to connect to the localhost. The startup command file fails, and displays the message "Aborting all open command files." 22. When running the graphics exerciser on a VISUALIZE-48 or VISUALIZE-48XP, the user may see the following error very infrequently: Neptune data signature incorrect during the multiboard test. expected = 0xaef77b1a, actual = 0xaef77b19 23. Adding Fibrechannel SCSI Mux ID Module. Defect Description: PHSS_7929: 1. SCSI_MUX fw_update tool: - Coding error: offset was always set to 0. - New feature. 2. SCSI_DISK fw_update tool and SCSIDSK2 were not design to handle files larger than 256 KB. 3. No previous PSI diagnostic exist in STM. 4. Added new features in the tool. 5. Added new features in the tool. 6. The MUX shows up once in the map for each SCSI card. If no SCSI cards are in the MUX, it won't show up. 7. Temporary files were not being managed correctly so the per-process limit of open file descriptors was reached while the SCSI disk expert tool was running. 8. Graphics devices attached to system will be identified with a product qualifier in the current device status as Graphics-Device, not the appropriate qualifier, like Graffitti, Hyper, etc. 9. The products were not supported product at the time of release. 10. Problem was caused by PDC F/W. PHSS_7759: 1. If the system is heavily running other applications, it is not unusual that the avaible memory may drop below 1M. This is not a problem. The change in the memory exerciser is to allow the test to continue even if the available free memory is less than 1M. In other words, the change is to lower the minimum memory requirement from 1M to 16K. If the available free memory drops below to 16K, the program will terminate with incomplete status. 2. The diagnostic library routine obtain_dev_type was not taking into account the output from lvlnboot. The code was expecting "Swap: ". On systems with the output similar to #lvlnboot -v lvlnboot: Volume group not activated. Cannot display volume group "/dev/db01". Boot Definitions for Volume Group /dev/vg00: Physical Volumes belonging in Root Volume Group: /dev/dsk/c1t5d0 (0/52.5.0) /dev/dsk/c1t6d0 (0/52.6.0) -- Boot Disk Root: lvol1 on: /dev/dsk/c1t6d0 No Swap Logical Volume configured Dump: lvol2 on: /dev/dsk/c1t6d0, 0 Dump: lvol3 on: /dev/dsk/c1t6d0, 1 the "Swap:" is not present. 3. Enhancement to the error decoding algorithm in the module. 4. a. Formula used in calculating the error rate is incorrect. b. When the "no user queries allowed" option is set and the diagnose tool is set to run more than one iteration, the tool will attempt to run tests which requires media not be present even when media is loaded causing an "Aborted command" error. c. Enhancement to the error decoding algorithm in the module. 5. a. Enhancement to trace log dump operation. Initial dump of trace logs will always write to default temporary file. User will not be prompted for the output file name with the "initial" dump of the trace logs upon start-up. User will still be prompted for the output file name when the trace logs dump is executed on demand by the user. b. Fix "Channel Hang" EEPROM log message display format to correctly display either a bit or byte setting depending on the EEPROM log format on the device. 6. Entering "Help" in the SCSI tape and library expert tools in cstm will give error message. The SCSI tape and library expert tools used "GeneralHelp" instead of "Help" as the help command. Tools fixed to use "Help" as the help command. 7. The products were not supported product at the time of release. 8. The cause of the problem was that the driver name "sflop" was not included in the verifier's checklist. 9. The problem here is that the tools and the mapping routines are using an ioctl GCDESCRIBE which is hanging when the system is booted CDE and no-one is logged on the console. 10. Devices were not supported product at time 10.20 released. The command uses a fixed timeout value which is too small for the new large capacity drives. 11. The command uses a fixed timeout value which is too small for the new large capacity drives. 12. When the tool attempts to access a bad hard disk drive, the driver often returns ENXIO. With just ENXIO (and not knowing what the device, e.g. MO, floppy, etc) it is dealing with, the tool could not determine if the drive is bad or because of the absence of media, so it keeps asking user to insert scratch disk. The fix is to enhance the message so that user can go elsewhere to get more information. 13. HPC1537A was not a support product at the time of release. 14. These changes are all to support new hardware. 15 Spelling error in copyutil module. 16. The problem will only occur when a command file is invoked while in xstm (via the run command file command in the file menu, the -f command line option, or when included in the .stmrc file.) Xstm will crash when a command file connects to a system whose password will expire within 20 days. Since the default script /usr/sbin/stm/ui/config/.stmrc connects to the local host, the problem may look like xstm begins to start-up and then crashes. This should only be seen in the last 20 days of January and July, as this is when the passwords will be expiring. 17. This problem occurs if the broadcast address on the host being tested is one which broadcasts only to hosts on a subnet, as opposed to an entire network. Example: The problem occurs if the broadcast address is 15.43.215.255 The problem does not occur for broadcast address is 15.255.255.255 18. CDE locks the graphics device when the login screen is up and thus STM cannot identify the graphics device. DDE changed it's command line parameters and how it executes. Added enhanced information tool for LAN/Console Interface. Added SCSI MO icon 19. The declaration of char pointers for the info_data data structure caused the problem. In this case we should use fixed size char array. 20. Design error in MSTM. 21. The function used to obtain the user name for the connection login relies on a terminal being connected to standard input, standard output, or standard error. When it doesn't find one, it uses an empty string for the login name, which is not valid. The login fails, and the startup script (which normally does an automatic login) terminates. 22. The test code did not correctly handle a situation where certain state is left in the graphics hardware. 23. The product was not available at the time 10.20 was released. SR: 4701328294 4701328989 4701330084 4701327809 4701331082 4701328757 4701329953 4701327130 4701330498 4701330100 4701331025 4701331116 Patch Files: /usr/lib/libdiag.sl /usr/sbin/diag/DASSDIAG /usr/sbin/diag/DIAGLIST /usr/sbin/diag/DUIDIR /usr/sbin/diag/IODEVACC /usr/sbin/diag/C0008000 /usr/sbin/diag/C0012000 /usr/sbin/diag/LAYOUTF /usr/sbin/diag/LAYMSG /usr/sbin/diag/SCSIDDS /usr/sbin/diag/SCSIDSK2 /usr/sbin/diag/MEMLOGP /usr/sbin/suplicen /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tool_lib/tlscsidev.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tool_lib/ tlidsector.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tool_lib/ tlgraphics.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ atmd.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ psid.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ diag_dds.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ diag_dlt.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ scsi_mux.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/exercise/ disk.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/exercise/lan.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/exercise/ memory.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dds.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dlt.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_lib.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptor.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_mux.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_disk.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/id/fcp_mux.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/cpu.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ fc_adaptor.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ graphics.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_3480.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_8mm.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_dds.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_mux.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_qic.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/verify/disk.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/utility/ copyutil.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ui/stm.cat /usr/lib/X11/app-defaults/XStm /usr/sbin/stm/lib/libdiagcm.sl /usr/sbin/stm/lib/libdiagms.sl /usr/sbin/stm/lib/libdiagpl.sl /usr/sbin/stm/lib/libdiagud.sl /usr/sbin/stm/lib/libdiagum.sl /usr/sbin/stm/lib/libdiagux.sl /usr/sbin/stm/ui/bin/stm /usr/sbin/stm/ui/bin/stm_map_read /usr/sbin/stm/uut/bin/sys/diagmond /usr/sbin/stm/uut/bin/tools/diagnose/atmd /usr/sbin/stm/uut/bin/tools/diagnose/psid /usr/sbin/stm/uut/bin/tools/diagnose/diag_dds /usr/sbin/stm/uut/bin/tools/diagnose/diag_dlt /usr/sbin/stm/uut/bin/tools/diagnose/scsi_mux /usr/sbin/stm/uut/bin/tools/exercise/graphics /usr/sbin/stm/uut/bin/tools/exercise/lan /usr/sbin/stm/uut/bin/tools/exercise/memory /usr/sbin/stm/uut/bin/tools/expert/scsi_dds /usr/sbin/stm/uut/bin/tools/expert/scsi_dlt /usr/sbin/stm/uut/bin/tools/expert/scsi_lib /usr/sbin/stm/uut/bin/tools/fw_update/fc_adaptor /usr/sbin/stm/uut/bin/tools/fw_update/scsi_mux /usr/sbin/stm/uut/bin/tools/fw_update/scsi_disk /usr/sbin/stm/uut/bin/tools/id/fcp_mux /usr/sbin/stm/uut/bin/tools/id/pa_module /usr/sbin/stm/uut/bin/tools/id/graphics_id /usr/sbin/stm/uut/bin/tools/info/cpu /usr/sbin/stm/uut/bin/tools/info/fc_adaptor /usr/sbin/stm/uut/bin/tools/info/graphics /usr/sbin/stm/uut/bin/tools/info/scsi_3480 /usr/sbin/stm/uut/bin/tools/info/scsi_8mm /usr/sbin/stm/uut/bin/tools/info/scsi_dds /usr/sbin/stm/uut/bin/tools/info/scsi_mux /usr/sbin/stm/uut/bin/tools/info/scsi_qic /usr/sbin/stm/uut/bin/tools/verify/disk /usr/sbin/stm/uut/lib/tlidsector.sl /usr/sbin/stm/uut/lib/tlscsidev.sl /usr/sbin/stm/uut/lib/tlgraphics.sl /var/stm/data/id_mod_xref /var/stm/data/prod_op_xref /var/stm/config/tools/diagnose/psi/psiniodl /var/stm/config/tools/diagnose/psi/psieisdl what(1) Output: /usr/lib/libdiag.sl: XIOANY,$Date: 95/04/19 15:51:19 $, $Revision: 1.27 $ OIOCS80,$Date: 94/07/06 13:20:06 $, $Revision: 1.12 $ XIOFLEX,$Date: 93/04/13 10:09:15 $, $Revision: 1.5 $ OEISAHPIB,$Date: 94/04/14 14:25:33 $, $Revision: 1.1 2 $ OIOPSI,$Date: 95/10/18 08:26:24 $, $Revision: 1.5 $ OIOFDDI,$Date: 94/05/20 12:20:20 $, $Revision: 1.10 $ OSCSIDA,$Date: 95/03/14 14:54:10 $, $Revision: 1.33 $ OSCSIMC,$Date: 95/10/31 18:48:29 $, $Revision: 1.18 $ OSCSISA,$Date: 94/12/15 13:50:28 $, $Revision: 1.30 $ OLN5EISA,$Date: 93/04/12 17:00:34 $, $Revision: 1.6 $ xiolan.p,$Revision: 1.18 $ errno_func.c,$Revision: 1.2 $ pioctl.c,$Revision: 1.3 $ setsign1.h,$Revision: 1.2 $ TIOMEM,$Date $, $Revision: 1.1.1.33 $ XIOMEM,$Date $, $Revision: 1.82 $ TIOMEM,$Date $, $Revision: 1.1.1.33 $ xiomempd.c,$Revision: 1.9 $ TIOMEM,$Date $, $Revision: 1.1.1.33 $ xiomemhk.c,$Revision: 1.32 $ XIOTAPE,$Date: 93/04/12 16:57:41 $, $Revision: 1.4 $ oaccpdc.c,$Revision: 1.10 $ OIOUTIL,$Date: 94/02/01 15:03:18 $, $Revision: 1.14 $ xiobuff.c,$Revision: 1.2 $ xdisktst.c,$Revision: 1.2 $ xdgshut.c,$Revision: 1.2 $ xlogserv.c,$Revision: 1.2 $ xipcproc.c,$Revision: 1.11 $ oduiutlc.c,$Revision: 1.7 $ oduimsg.c,$Revision: 1.5 $ oduilic.c,$Revision: 1.6 $ oduiinst.c,$Revision: 1.3 $ xfileps.c,$Revision: 1.11 $ ocbind.c,$Revision: 1.8 $ oduimdst.c,$Revision: 1.4 $ oduihc.c,$Revision: 1.3 $ oduiintc.c,$Revision: 1.16 $ oduiextc.c,$Revision: 1.2 $ syscall.c,$Revision: 1.6 $ oduisig.c,$Revision: 1.6 $ xpsutil.c,$Revision: 1.8 $ xdevacc.c,$Revision: 1.178.1.1 $ xdevtype.c,$Revision: 1.23 $ xprodnum.c,$Revision: 1.56 $ xdsmlog.c,$Revision: 1.9 $ oduici.c,$Revision: 1.4 $ xmonserv.c,$Revision: 1.46 $ odecstat.p,$Revision: 1.3 $ oinforeq.p,$Revision: 1.2 $ oprogenv.p,$Revision: 1.2 $ odplsrv.p,$Revision: 1.3 $ omlpacc.p,$Revision: 1.5 $ oiopt.p,$Revision: 1.5 $ odirmgt.p,$Revision: 1.2 $ obits.p,$Revision: 1.2 $ osecmgt.p,$Revision: 1.3 $ odiagsa.p,$Revision: 1.3 $ omonserv.p,$Revision: 1.10 $ odgtest.p,$Revision: 1.4 $ ododata.p,$Revision: 1.5 $ ophserv.p,$Revision: 1.3 $ opbind.p,$Revision: 1.3 $ oduiutil.p,$Revision: 1.3 $ oduiexit.p,$Revision: 1.7 $ ostorlog.p,$Revision: 1.12 $ oscdisk.p,$Revision: 1.4 $ odevacc.p,$Revision: 1.20 $ opinit.p,$Revision: 1.8 $ oscanall.p,$Revision: 1.2 $ ostrnum.p,$Revision: 1.3 $ oerrmgt.p,$Revision: 1.4 $ oduilang.p,$Revision: 1.3 $ oduiprnt.p,$Revision: 1.6 $ oduiinit.p,$Revision: 1.9 $ oduiipc.p,$Revision: 1.6 $ oduiintr.p,$Revision: 1.4 $ odatetim.p,$Revision: 1.3 $ oiolgext.p,$Revision: 1.1 $ /usr/sbin/diag/DASSDIAG: DASSDIAG,06/20/95,A.02.09 OSCSIDA,$Date: 95/03/14 14:54:10 $, $Revision: 1.33 $ OSCSIMC,$Date: 95/10/31 18:48:29 $, $Revision: 1.18 $ xiobuff.c,$Revision: 1.2 $ xfileps.c,$Revision: 1.11 $ ocbind.c,$Revision: 1.8 $ odecstat.p,$Revision: 1.3 $ oiopt.p,$Revision: 1.5 $ osecmgt.p,$Revision: 1.3 $ odevacc.p,$Revision: 1.20 $ opinit.p,$Revision: 1.8 $ oscanall.p,$Revision: 1.2 $ XIOANY,$Date: 95/04/19 15:51:19 $, $Revision: 1.27 $ xipcproc.c,$Revision: 1.11 $ syscall.c,$Revision: 1.6 $ xpsutil.c,$Revision: 1.8 $ xdevacc.c,$Revision: 1.178 $ xdevtype.c,$Revision: 1.23 $ xprodnum.c,$Revision: 1.56 $ xmonserv.c,$Revision: 1.46 $ oinforeq.p,$Revision: 1.2 $ omlpacc.p,$Revision: 1.5 $ odirmgt.p,$Revision: 1.2 $ odiagsa.p,$Revision: 1.3 $ omonserv.p,$Revision: 1.10 $ odgtest.p,$Revision: 1.4 $ ododata.p,$Revision: 1.5 $ ophserv.p,$Revision: 1.3 $ opbind.p,$Revision: 1.3 $ ostrnum.p,$Revision: 1.3 $ oerrmgt.p,$Revision: 1.4 $ oduiprnt.p,$Revision: 1.6 $ odatetim.p,$Revision: 1.3 $ OIOCS80,$Date: 94/07/06 13:20:06 $, $Revision: 1.12 $ OIOPSI,$Date: 95/10/18 08:26:24 $, $Revision: 1.5 $ OIOFDDI,$Date: 94/05/20 12:20:20 $, $Revision: 1.10 $ OSCSISA,$Date: 94/12/15 13:50:28 $, $Revision: 1.30 $ OLN5EISA,$Date: 93/04/12 17:00:34 $, $Revision: 1.6 $ xiolan.p,$Revision: 1.18 $ oaccpdc.c,$Revision: 1.10 $ xlogserv.c,$Revision: 1.2 $ oduimsg.c,$Revision: 1.5 $ oduiintc.c,$Revision: 1.16 $ obits.p,$Revision: 1.2 $ ostorlog.p,$Revision: 1.12 $ oduiinit.p,$Revision: 1.9 $ XIOFLEX,$Date: 93/04/13 10:09:15 $, $Revision: 1.5 $ errno_func.c,$Revision: 1.2 $ pioctl.c,$Revision: 1.3 $ setsign1.h,$Revision: 1.2 $ oduisig.c,$Revision: 1.6 $ oscdisk.p,$Revision: 1.4 $ oduiintr.p,$Revision: 1.4 $ /usr/sbin/diag/DIAGLIST: None /usr/sbin/diag/DUIDIR: None /usr/sbin/diag/IODEVACC: IODEVACC,$Revision: 1.1.1.83 $'$ /usr/sbin/diag/C0008000: None /usr/sbin/diag/C0012000: None /usr/sbin/diag/LAYOUTF: None /usr/sbin/diag/LAYMSG: None /usr/sbin/diag/SCSIDDS: SCSIDDS, 5/10/96,A.02.33 /usr/sbin/diag/SCSIDSK2: SCSIDSK2,1/5/96,A.04.00 /usr/sbin/diag/MEMLOGP: @(#)MEMLOGP,$Revision: 1.47 $ A.02.25 /usr/sbin/suplicen: CLOSE_MSG_CATALOG.C,$Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INFORM_USER_OF_SUCCESS.C, $Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ OPEN_MSG_CATALOG.C, $Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ QUERY_USER.C, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SUPLICEN,$Revision: 1.27 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_HVERSION.C, $Revision: 1.12 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ LIC_GET_DATE.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_LIC_AR.H, $Revision: 1.32 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 CONVERT_DATE, $Revision: 1.6 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tool_lib/ tlscsidev.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tool_lib/ tlidsector.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tool_lib/ tlgraphics.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ atmd.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ psid.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ diag_dds.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ diag_dlt.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/diagnose/ scsi_mux.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/exercise/ disk.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/exercise/ lan.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/exercise/ memory.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dds.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_ddsx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dlt.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_dltx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_lib.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/expert/ scsi_libx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptor.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ fc_adaptorx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_mux.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_muxx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_disk.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/fw_update/ scsi_diskx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/id/fcp_mux.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/cpu.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ fc_adaptor.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ graphics.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_3480.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_8mm.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_dds.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_mux.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/info/ scsi_qic.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/verify/disk.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/utility/ copyutil.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ui/stm.cat: None /usr/lib/X11/app-defaults/XStm: None /usr/sbin/stm/lib/libdiagcm.sl: cm_append_buff.c, $Revision: 1.7 $ isinteger.c, $Revision: 1.3 $ isquote.c, $Revision: 1.3 $ cm_build_cmd_list.c, $Revision: 1.16 $ cm_build_exit_response_list.c, $Revision: 1.5 $ cm_build_map_keyword_list.c, $Revision: 1.7 $ cm_build_map_title1.c, $Revision: 1.9 $ cm_build_map_title2.c, $Revision: 1.11 $ cm_build_map_title3.c, $Revision: 1.10 $ cm_build_map_title_seperator.c, $Revision: 1.8 $ cm_build_rb_response_list.c, $Revision: 1.7 $ cm_cat_map_info.c, $Revision: 1.7 $ cm_clear_local_entry_list.c, $Revision: 1.5 $ cm_close_target.c, $Revision: 1.8 $ cm_convert_path_to_dev.c, $Revision: 1.4 $ cm_destroy_dialog_box.c, $Revision: 1.7 $ cm_display_rb_entry.c, $Revision: 1.6 $ cm_escape_to_os.c, $Revision: 1.6 $ cm_get_active_tool.c, $Revision: 1.5 $ cm_get_input.c, $Revision: 1.21 $ cm_get_keyword.c, $Revision: 1.9 $ cm_get_last_op_status.c, $Revision: 1.11 $ cm_lib_rev.c, $Revision: 1.2 $ cm_num_sel_in_list.c, $Revision: 1.3 $ cm_poll_for_interrupt.c, $Revision: 1.12 $ cm_process_float_widget.c, $Revision: 1.11 $ cm_process_keyword_input.c, $Revision: 1.20 $ cm_process_list_widget.c, $Revision: 1.5 $ cm_process_list_widget_line.c, $Revision: 1.19 $ cm_prompt_for_input.c, $Revision: 1.7 $ cm_read_line.c, $Revision: 1.11 $ cm_select_widget.c, $Revision: 1.3 $ cm_set_radio_button.c, $Revision: 1.6 $ cm_show_error_position.c, $Revision: 1.9 $ cm_show_progress.c, $Revision: 1.7 $ cm_update_buttons.c, $Revision: 1.5 $ cm_update_double_widget.c, $Revision: 1.11 $ cm_update_local_entry_list.c, $Revision: 1.6 $ cm_update_menu.c, $Revision: 1.4 $ cm_write_cat_msg.c, $Revision: 1.3 $ cm_write_data.c, $Revision: 1.5 $ cm_write_error_caret.c, $Revision: 1.5 $ delete_str_list.c, $Revision: 1.5 $ get_button.c, $Revision: 1.3 $ get_keyword_that_expects_response.c, $Revision: 1.5 $ inc_error_ptr_offset.c, $Revision: 1.2 $ install_unique_char_count.c, $Revision: 1.7 $ lookup_cmd.c, $Revision: 1.6 $ rm_garbage_chars.c, $Revision: 1.6 $ rm_spaces.c, $Revision: 1.3 $ str_to_lower.c, $Revision: 1.4 $ strcmp_ignorecase.c, $Revision: 1.5 $ strncmp_ignorecase.c, $Revision: 1.4 $ cm_build_bool_response_list.c, $Revision: 1.7 $ cm_build_button_prompt.c, $Revision: 1.9 $ cm_build_keyword_list.c, $Revision: 1.8 $ cm_build_list_widget_cmd_list.c, $Revision: 1.14 $ cm_build_list_widget_valid_response_list.c, $Revisio n: 1.8 $ cm_build_map_entry.c, $Revision: 1.14 $ cm_convert_str_to_double.c, $Revision: 1.8 $ cm_convert_str_to_long.c, $Revision: 1.7 $ cm_convert_str_to_ulong.c, $Revision: 1.1 $ cm_convert_time_to_str.c, $Revision: 1.9 $ cm_create_dialog_box.c, $Revision: 1.24 $ cm_display_list.c, $Revision: 1.13 $ cm_display_map.c, $Revision: 1.13 $ cm_display_map_title.c, $Revision: 1.9 $ cm_display_radio_buttons_and_prompt.c, $Revision: 1. 10 $ cm_echo_input.c, $Revision: 1.9 $ cm_fdopen.c, $Revision: 1.8 $ cm_find_button.c, $Revision: 1.5 $ cm_get_cat_msg.c, $Revision: 1.11 $ cm_get_dev_num_for_path.c, $Revision: 1.6 $ cm_get_forward_progress.c, $Revision: 1.12 $ cm_get_list_num_for_entry.c, $Revision: 1.8 $ cm_get_range_of_entries.c, $Revision: 1.12 $ cm_init_local_entry_list.c, $Revision: 1.3 $ cm_insert_butns_and_unique_chr_cnt.c, $Revision: 1.6 $ cm_insert_cat_msg_in_list.c, $Revision: 1.6 $ cm_lookup_cmd.c, $Revision: 1.3 $ cm_open_target.c, $Revision: 1.17 $ cm_parse_keyword.c, $Revision: 1.15 $ cm_parse_keyword_response.c, $Revision: 1.11 $ cm_peep_token.c, $Revision: 1.2 $ cm_point_to_end_of_response.c, $Revision: 1.14 $ cm_prep_input_line.c, $Revision: 1.9 $ cm_process_bool_widget.c, $Revision: 1.11 $ cm_process_cmd.c, $Revision: 1.16 $ cm_process_date_time_widget.c, $Revision: 1.2 $ cm_process_double_widget.c, $Revision: 1.12 $ cm_process_file_spec.c, $Revision: 1.14 $ cm_process_int_widget.c, $Revision: 1.10 $ cm_process_keywords.c, $Revision: 1.11 $ cm_process_list_widget_interactively.c, $Revision: 1 .11 $ cm_process_map_widget.c, $Revision: 1.2 $ cm_process_multi_file_spec_widget.c, $Revision: 1.3 $ cm_process_radio_button_widget.c, $Revision: 1.18 $ cm_process_string_widget.c, $Revision: 1.13 $ cm_process_uint_widget.c, $Revision: 1.1 $ cm_process_widgets.c, $Revision: 1.21 $ cm_prompt_for_exit.c, $Revision: 1.19 $ pull_msg_from_ll.c, $Revision: 1.5 $ cm_push_a_button_any_button.c, $Revision: 1.20 $ cm_push_ok.c, $Revision: 1.5 $ cm_read_data_fp.c, $Revision: 1.6 $ cm_read_device.c, $Revision: 1.14 $ cm_record_cmd.c, $Revision: 1.8 $ cm_record_output.c, $Revision: 1.6 $ cm_save_location_id.c, $Revision: 1.8 $ cm_select_dialog_box.c, $Revision: 1.12 $ cm_update_bool_widget.c, $Revision: 1.13 $ cm_update_date_time_widget.c, $Revision: 1.3 $ cm_update_dialog_box.c, $Revision: 1.12 $ cm_update_file_spec_widget.c, $Revision: 1.16 $ cm_update_float_widget.c, $Revision: 1.12 $ cm_update_int_widget.c, $Revision: 1.13 $ cm_update_list.c, $Revision: 1.6 $ cm_update_list_widget.c, $Revision: 1.25 $ cm_update_map.c, $Revision: 1.18 $ cm_update_map_entries.c, $Revision: 1.26 $ cm_update_map_widget.c, $Revision: 1.1 $ cm_update_string_widget.c, $Revision: 1.11 $ cm_update_multi_file_spec_widget.c, $Revision: 1.3 $ cm_update_uint_widget.c, $Revision: 1.2 $ cm_validate_cmd.c, $Revision: 1.6 $ cm_validate_list_widget.c, $Revision: 1.3 $ cm_validate_str_len.c, $Revision: 1.6 $ cm_write_format_msg.c, $Revision: 1.3 $ cm_write_msg.c, $Revision: 1.7 $ get_token.c, $Revision: 1.20 $ insert_buttons_in_list.c, $Revision: 1.8 $ insert_str_list.c, $Revision: 1.8 $ keyword_response_expected.c, $Revision: 1.8 $ pull_msg_from_ll.c, $Revision: 1.10 $ strip_string.c, $Revision: 1.9 $ /usr/sbin/stm/lib/libdiagms.sl: ms_lib_rev.c, $Revision: 1.4 $ ms_append_pg_uut_stat_list_entry.c, $Revision: 1.7 $ ms_get_uut_op_info.c, $Revision: 1.4 $ ms_delete_pg_uut_stat_list_entry.c, $Revision: 1.7 $ ms_find_setup_list_entry.c, $Revision: 1.8 $ ms_handle_query_waiting.c, $Revision: 1.5 $ ms_add_sop_parm.c, $Revision: 1.6 $ ms_create_file_sem.c, $Revision: 1.7 $ ms_create_system_semaphores.c, $Revision: 1.4 $ ms_get_key_file_path.c, $Revision: 1.2 $ ms_log_st_info_to_act_log.c, $Revision: 1.5 $ ms_release_mon_uut_status.c, $Revision: 1.2 $ ms_release_saved_mon_uut_status.c, $Revision: 1.1 $ ms_release_uut_status.c, $Revision: 1.2 $ ms_delete_mon_uut_status_entry.c, $Revision: 1.2 $ ms_setup_mon_sys_global.c, $Revision: 1.2 $ ms_setup_mon_globals.c, $Revision: 1.11 $ ms_setup_system_resources.c, $Revision: 1.2 $ ms_delete_build_requestor.c, $Revision: 1.2 $ ms_notify_ui.c, $Revision: 1.2 $ ms_release_ports.c, $Revision: 1.1 $ ms_sys_cleanup_and_exit.c, $Revision: 1.6 $ ms_handle_hung_tool.c, $Revision: 1.3 $ ms_free_prev_found_hw_list.c, $Revision: 1.1 $ ms_abort_tool.c, $Revision: 1.22 $ ms_kill_tool.c, $Revision: 1.1 $ ms_append_progress_global_entry.c, $Revision: 1.7 $ ms_build_exit_ll_msg.c, $Revision: 1.7 $ ms_build_exit_status_ll_msg.c, $Revision: 1.4 $ ms_get_uut_op_info.c, $Revision: 1.7 $ ms_get_new_progress_global_entry.c, $Revision: 1.4 $ ms_delete_progress_global_entry.c, $Revision: 1.2 $ ms_copy_log_file.c, $Revision: 1.16 $ ms_copy_logs_for_sop.c, $Revision: 1.14 $ ms_create_logs_dir_for_sop.c, $Revision: 1.15 $ ms_create_sop_shm.c, $Revision: 1.15 $ ms_create_sys_port.c, $Revision: 1.13 $ ms_delete_setup_list_entry.c, $Revision: 1.10 $ ms_execute_tool.c, $Revision: 1.32 $ ms_get_new_pg_uut_stat_list_entry.c, $Revision: 1.6 $ ms_interrupt_tool.c, $Revision: 1.5 $ ms_link_test_act_logs.c, $Revision: 1.14 $ ms_read_diagmon_config_file.c, $Revision: 1.10 $ ms_append_setup_list_entr.c, $Revision: 1.4 $ ms_complete_id_routine.c, $Revision: 1.8 $ ms_create_key_file_path.c, $Revision: 1.5 $ ms_execute_id_module.c, $Revision: 1.18 $ ms_get_avail_ops.c, $Revision: 1.3 $ ms_get_id_mod_name.c, $Revision: 1.5 $ ms_get_internal_results.c, $Revision: 1.5 $ ms_get_new_setup_list_entry.c, $Revision: 1.3 $ ms_get_uut_config_info.c, $Revision: 1.14 $ ms_remove_file_sem.c, $Revision: 1.6 $ ms_get_new_mon_uut_status.c, $Revision: 1.3 $ ms_get_new_process_info_entry.c, $Revision: 1.4 $ ms_delete_process_info_entry.c, $Revision: 1.3 $ ms_delete_process_info_entry.c, $Revision: 1.2 $ ms_resume_tool.c, $Revision: 1.12 $ ms_send_event_msg.c, $Revision: 1.8 $ ms_send_system_result.c, $Revision: 1.10 $ ms_send_download_reply.c, $Revision: 1.1 $ ms_send_host_info_reply.c, $Revision: 1.1 $ ms_send_get_files_dirs_reply.c, $Revision: 1.1 $ ms_setup_for_sop_exec.c, $Revision: 1.19 $ ms_setup_uut_stat_and_pg_uut_stat.c, $Revision: 1.14 $ ms_suspend_tool.c, $Revision: 1.19 $ ms_add_build_requestor.c, $Revision: 1.1 $ ms_abort_all_main_active.c, $Revision: 1.4 $ ms_abort_internal_active.c, $Revision: 1.2 $ ms_build_sys_port.c, $Revision: 1.2 $ ms_handle_exited_child.c, $Revision: 1.6 $ ms_handle_exited_build.c, $Revision: 1.8 $ ms_handle_exited_process.c, $Revision: 1.3 $ ms_handle_exited_daemon.c, $Revision: 1.1 $ ms_handle_util_list.c, $Revision: 1.4 $ ms_manage_sys_sig_control.c, $Revision: 1.10 $ ms_log_start_to_syslogd.c, $Revision: 1.5 $ ms_log_exit_to_syslogd.c, $Revision: 1.8 $ ms_append_daemon_info_entry.c, $Revision: 1.2 $ ms_delete_daemon_info_entry.c, $Revision: 1.2 $ ms_setup_for_daemon_exec.c, $Revision: 1.3 $ ms_launch_daemons.c, $Revision: 1.4 $ ms_handle_compl_waiting.c, $Revision: 1.1 $ ms_handle_exited_tool.c, $Revision: 1.5 $ ms_handle_tools.c, $Revision: 1.7 $ ms_create_mon_uut_status_entries.c, $Revision: 1.13 $ ms_create_old_mon_uut_status_entries.c, $Revision: 1 .3 $ ms_create_mon_uut_status_header.c, $Revision: 1.14 $ ms_create_prev_found_hw_list.c, $Revision: 1.2 $ ms_saved_create_prev_found_hw_list.c, $Revision: 1.1 $ ms_cleanup_for_prev_found_hw_list.c, $Revision: 1.2 $ ms_download_file.c, $Revision: 1.2 $ ms_send_files_dirs.c, $Revision: 1.3 $ ms_get_valid_lic.c, $Revision: 1.4.1.1 $ ms_rescan_hw.c, $Revision: 1.2 $ ms_get_hw_config.c, $Revision: 1.5 $ ms_update_uut_status.c, $Revision: 1.16 $ /usr/sbin/stm/lib/libdiagpl.sl: pl_lib_rev.c, $Revision: 1.5 $ pl_access_uut_status.c, $Revision: 1.8 $ pl_access_os_logger_act_log.c, $Revision: 1.2 $ pl_get_sys_global.c, $Revision: 1.13 $ pl_log_to_test_activity_log.c, $Revision: 1.7 $ pl_log_to_os_logger_act_log.c, $Revision: 1.2 $ pl_log_to_mem_logger_act_log.c, $Revision: 1.2 $ pl_log_to_scan_hw_log.c, $Revision: 1.3 $ pl_complete_decode_routine.c, $Revision: 1.6 $ pl_copy_data.c, $Revision: 1.3 $ pl_log_to_activity_log.c, $Revision: 1.6 $ pl_overwrite_act_log_header.c, $Revision: 1.5 $ pl_release_activity_log.c, $Revision: 1.5 $ pl_release_id_mod_xref.c, $Revision: 1.3 $ pl_release_diagmon_config.c, $Revision: 1.3 $ pl_release_prod_op_xref.c, $Revision: 1.3 $ pl_release_util_list.c, $Revision: 1.3 $ pl_release_uut_status.c, $Revision: 1.3 $ pl_release_os_logger_act_log.c, $Revision: 1.1 $ pl_release_mem_logger_act_log.c, $Revision: 1.1 $ pl_write_ui_log_header.c, $Revision: 1.2 $ pl_write_scan_hw_log_header.c, $Revision: 1.4 $ pl_write_ta_log_header.c, $Revision: 1.6 $ pl_get_file.c, $Revision: 1.9 $ pl_set_up_sys_req.c, $Revision: 1.2 $ pl_access_failure_log.c, $Revision: 1.15 $ pl_access_info_log.c, $Revision: 1.14 $ pl_access_prod_op_xref.c, $Revision: 1.12 $ pl_access_id_mod_xref.c, $Revision: 1.8 $ pl_access_diagmon_config.c, $Revision: 1.4 $ pl_access_scan_hw_log.c, $Revision: 1.4 $ pl_access_util_list.c, $Revision: 1.8 $ pl_access_raw_os_error_log.c, $Revision: 1.1 $ pl_get_diagmond_pid.c, $Revision: 1.4 $ pl_access_test_activity_log.c, $Revision: 1.15 $ pl_access_mem_logger_act_log.c, $Revision: 1.2 $ pl_clear_port.c, $Revision: 1.1 $ pl_append_to_data_file.c, $Revision: 1.12 $ pl_block_signals.c, $Revision: 1.13 $ pl_build_exit_ll_msg.c, $Revision: 1.4 $ pl_check_read_port.c, $Revision: 1.10 $ pl_cleanup_sig_pipe.c, $Revision: 1.10 $ pl_create_open_file.c, $Revision: 1.18 $ pl_create_port.c, $Revision: 1.14 $ pl_create_send_port.c, $Revision: 1.12 $ pl_gen_mod_control_handling.c, $Revision: 1.9 $ pl_gen_init_mod.c, $Revision: 1.6 $ pl_get_mod_data.c, $Revision: 1.9 $ pl_lock_file_for_append.c, $Revision: 1.11 $ pl_abort_internal_routine.c, $Revision: 1.8 $ pl_access_activity_log.c, $Revision: 1.9 $ pl_access_data_file.c, $Revision: 1.9 $ pl_access_ui_log.c, $Revision: 1.8 $ pl_build_exit_status_ll_msg.c, $Revision: 1.5 $ pl_block_sigchld.c, $Revision: 1.1 $ pl_block_suspend.c, $Revision: 1.6 $ pl_cleanup_sigchld.c, $Revision: 1.5 $ pl_copy_internal_err_log.c, $Revision: 1.10 $ pl_create_internal_shm.c, $Revision: 1.9 $ pl_create_shm.c, $Revision: 1.6 $ pl_delete_logs_for_sop.c, $Revision: 1.11 $ pl_delete_logs_for_sop.c, $Revision: 1.1 $ pl_execute_decode_mod.c, $Revision: 1.18 $ pl_execute_internal_routine.c, $Revision: 1.19 $ pl_get_curr_lic_info.c, $Revision: 1.3 $ pl_get_files_and_dirs.c, $Revision: 1.4 $ pl_remote_get_files_and_dirs.c, $Revision: 1.5 $ pl_setup_for_get_files_dirs.c, $Revision: 1.2 $ pl_setup_port_for_get_files_dirs_data.c, $Revision: 1.1 $ pl_get_lic_exp_info.c, $Revision: 1.1 $ pl_is_lic_rco.c, $Revision: 1.1 $ pl_install_lic.c, $Revision: 1.2 $ pl_deinstall_lic.c, $Revision: 1.1 $ pl_get_file_sem.c, $Revision: 1.5 $ pl_get_sys_port_num.c, $Revision: 1.3 $ pl_val_key_file_path.c, $Revision: 1.8 $ pl_handle_exited_decode.c, $Revision: 1.6 $ pl_init_st_log_global.c, $Revision: 1.5 $ pl_log_to_ui_log.c, $Revision: 1.7 $ pl_log_tool_start.c, $Revision: 1.6 $ pl_log_tool_ops.c, $Revision: 1.9 $ pl_read_uut_status_header.c, $Revision: 1.9 $ pl_read_uut_status_entry.c, $Revision: 1.4 $ pl_read_prod_op_entry.c, $Revision: 1.17 $ pl_read_id_mod_entry.c, $Revision: 1.6 $ pl_read_diagmon_config_entry.c, $Revision: 1.3 $ pl_rel_file_sem.c, $Revision: 1.9 $ pl_release_data_file.c, $Revision: 1.3 $ pl_release_shm.c, $Revision: 1.2 $ pl_send_started_progress.c, $Revision: 1.2 $ pl_setup_sigchld.c, $Revision: 1.3 $ pl_setup_for_internal_mod_exec.c, $Revision: 1.8 $ pl_unblock_sigchld.c, $Revision: 1.1 $ pl_unblock_suspend.c, $Revision: 1.5 $ pl_validate_sop.c, $Revision: 1.5 $ pl_validate_test_parms.c, $Revision: 1.7 $ pl_read_data.c, $Revision: 1.15 $ pl_read_line.c, $Revision: 1.11 $ pl_receive_msg.c, $Revision: 1.27 $ pl_release_port.c, $Revision: 1.13 $ pl_send_msg.c, $Revision: 1.16 $ pl_setup_read_port.c, $Revision: 1.12 $ pl_setup_send_port.c, $Revision: 1.16 $ pl_setup_sig_pipe.c, $Revision: 1.10 $ pl_unblock_signals.c, $Revision: 1.13 $ pl_unlock_file_from_append.c, $Revision: 1.10 $ pl_write_data.c, $Revision: 1.16 $ pl_copy_file.c, $Revision: 1.12 $ pl_get_read_access_to_file.c, $Revision: 1.4 $ pl_get_valid_reply_msg.c, $Revision: 1.6 $ pl_setup_for_upload.c, $Revision: 1.10 $ pl_setup_port_for_upload_data.c, $Revision: 1.1 $ pl_upload_file.c, $Revision: 1.9 $ pl_declare_tool_globs.c, $Revision: 1.3 $ /usr/sbin/stm/lib/libdiagud.sl: add_to_selected_list.c, $Revision: 1.6 $ attach_to_port.c, $Revision: 1.5 $ check_box_validity.c, $Revision: 1.3 $ cu_check_box_validity.c, $Revision: 1.1 $ cu_find_max_day.c, $Revision: 1.2 $ cu_format_lines.c, $Revision: 1.3 $ cu_get_menu_item.c, $Revision: 1.3 $ cu_get_list_entry.c, $Revision: 1.2 $ cu_get_cm_len.c, $Revision: 1.4 $ cu_get_double_value.c, $Revision: 1.5 $ cu_get_uut_info.c, $Revision: 1.1 $ cu_put_double_value.c, $Revision: 1.5 $ deallocate_help_index.c, $Revision: 1.6 $ deallocate_port.c, $Revision: 1.18 $ delete_uut.c, $Revision: 1.11 $ dispatch_help_viewer.c, $Revision: 1.15 $ display_map.c, $Revision: 1.8 $ escape_to_os.c, $Revision: 1.4 $ extract_msg_line.c, $Revision: 1.7 $ find_update_widget.c, $Revision: 1.3 $ get_client_event.c, $Revision: 1.3 $ get_help_index.c, $Revision: 1.6 $ get_interactive_request.c, $Revision: 1.18 $ get_menu_token.c, $Revision: 1.11 $ pull_cm_from_string.c, $Revision: 1.6 $ record_file.c, $Revision: 1.3 $ release_cm.c, $Revision: 1.3 $ run_command_file.c, $Revision: 1.9 $ store_menu_commands.c, $Revision: 1.6 $ store_menu_item.c, $Revision: 1.6 $ ud_set_alternate_parent.c, $Revision: 1.1 $ ud_change_attributes.c, $Revision: 1.2 $ ud_close_target.c, $Revision: 1.5 $ ud_lib_rev.c, $Revision: 1.7 $ ud_lock_disabled_dialogs.c, $Revision: 1.2 $ ud_record_wait.c, $Revision: 1.1 $ widget_fixed_len.c, $Revision: 1.11 $ write_map_in_file.c, $Revision: 1.6 $ add_box_validity.c, $Revision: 1.3 $ add_cat_info_to_msg.c, $Revision: 1.17 $ add_menu_item.c, $Revision: 1.10 $ add_uut.c, $Revision: 1.18 $ add_widget.c, $Revision: 1.81 $ allocate_widget.c, $Revision: 1.12 $ build_cm.c, $Revision: 1.10 $ check_options.c, $Revision: 1.15 $ close_command_file.c, $Revision: 1.18 $ core_display_init.c, $Revision: 1.55 $ create_dialog_box.c, $Revision: 1.30 $ create_dialog_info.c, $Revision: 1.74 $ cu_add_item_to_list.c, $Revision: 1.7 $ cu_delete_item_from_list.c, $Revision: 1.4 $ cu_find_item_in_list.c, $Revision: 1.4 $ cu_get_widget_info.c, $Revision: 1.23 $ cu_set_widget_var_size.c, $Revision: 1.16 $ deallocate_dialog_info_struct.c, $Revision: 1.57 $ default_dialog_box.c, $Revision: 1.33 $ display_interactive_request.c, $Revision: 1.42 $ expand_ll_msg.c, $Revision: 1.28 $ get_file_overwrite_conf.c, $Revision: 1.8 $ get_msg_opt_token.c, $Revision: 1.28 $ get_target_input.c, $Revision: 1.28 $ get_value_from_user.c, $Revision: 1.6 $ increment_nest_count.c, $Revision: 1.6 $ invoke_shell.c, $Revision: 1.2 $ monitor_dialog_port.c, $Revision: 1.30 $ parse_dialog_box_line.c, $Revision: 1.25 $ parse_location_id.c, $Revision: 1.3 $ parse_menu_command_options.c, $Revision: 1.19 $ print_expand_msg_error.c, $Revision: 1.2 $ process_target_input.c, $Revision: 1.104 $ pull_cm_from_ll.c, $Revision: 1.17 $ queue_interactive_request.c, $Revision: 1.4 $ record_dialog_box.c, $Revision: 1.35 $ record_map.c, $Revision: 1.11 $ record_cat_msg.c, $Revision: 1.2 $ record_cmd_file.c, $Revision: 1.7 $ record_output_file.c, $Revision: 1.6 $ reply_to_client.c, $Revision: 1.30 $ save_client_event.c, $Revision: 1.4 $ ui_core_poll_and_process_input.c, $Revision: 1.20 $ ui_core_poll_for_input.c, $Revision: 1.35 $ update_dialog_box.c, $Revision: 1.21 $ update_dialog_box_menu.c, $Revision: 1.17 $ update_interactive.c, $Revision: 1.2 $ update_list.c, $Revision: 1.4 $ update_map.c, $Revision: 1.13 $ update_text.c, $Revision: 1.17 $ update_view.c, $Revision: 1.1 $ validate_field.c, $Revision: 1.49 $ /usr/sbin/stm/lib/libdiagum.sl: ti_close_target.c, $Revision: 1.8 $ ti_destroy_dialog_box.c, $Revision: 1.7 $ um_append_movement_entry.c, $Revision: 1.3 $ um_append_sub_pad.c, $Revision: 1.4 $ um_calc_display_size.c, $Revision: 1.4 $ um_calc_file_spec_display_size.c, $Revision: 1.4 $ um_calc_list_display_size.c, $Revision: 1.5 $ um_calc_map_display_size.c, $Revision: 1.4 $ um_calc_map_valid_lines.c, $Revision: 1.3 $ um_find_any_item_at_prev_level.c, $Revision: 1.2 $ um_find_first_item_at_next_level.c, $Revision: 1.3 $ um_find_next_item_at_level.c, $Revision: 1.3 $ um_find_prev_item_at_level.c, $Revision: 1.3 $ um_find_subpad_for_widget.c, $Revision: 1.3 $ um_get_starting_menu_item.c, $Revision: 1.3 $ um_get_subpad_yx.c, $Revision: 1.4 $ um_handle_key_left.c, $Revision: 1.4 $ um_handle_key_right.c, $Revision: 1.4 $ um_handle_list_key_down.c, $Revision: 1.2 $ um_handle_list_key_up.c, $Revision: 1.2 $ um_handle_non_input.c, $Revision: 1.5 $ um_handle_paging_input.c, $Revision: 1.4 $ um_handle_text_input.c, $Revision: 1.4 $ um_lib_rev.c, $Revision: 1.2 $ um_refresh_other_widgets.c, $Revision: 1.4 $ um_release_sub_pad_list.c, $Revision: 1.3 $ um_release_sub_pad_list.c, $Revision: 1.4 $ ti_create_dialog_box.c, $Revision: 1.19 $ ti_escape_to_os.c, $Revision: 1.6 $ ti_get_input.c, $Revision: 1.25 $ ti_open_target.c, $Revision: 1.18 $ ti_select_dialog_box.c, $Revision: 1.4 $ ti_select_widget.c, $Revision: 1.10 $ ti_show_help.c, $Revision: 1.3 $ ti_update_dialog_box.c, $Revision: 1.13 $ ti_update_menu.c, $Revision: 1.3 $ um_add_bool_widget.c, $Revision: 1.9 $ um_add_bracketed_input.c, $Revision: 1.5 $ um_add_double_widget.c, $Revision: 1.3 $ um_add_file_spec_widget.c, $Revision: 1.13 $ um_add_float_widget.c, $Revision: 1.3 $ um_add_int_widget.c, $Revision: 1.11 $ um_add_label_widget.c, $Revision: 1.13 $ um_add_label_and_col.c, $Revision: 1.4 $ um_add_list_widget.c, $Revision: 1.16 $ um_add_map_widget.c, $Revision: 1.9 $ um_add_present_widget.c, $Revision: 1.16 $ um_add_rad_button_widget.c, $Revision: 1.9 $ um_add_string_widget.c, $Revision: 1.11 $ um_add_text_widget.c, $Revision: 1.3 $ um_add_uint_widget.c, $Revision: 1.1 $ um_add_view_widget.c, $Revision: 1.8 $ um_build_cmd_menu.c, $Revision: 1.15 $ um_build_push_buttons.c, $Revision: 1.4 $ um_calc_file_lines.c, $Revision: 1.5 $ um_copy_sub_pad.c, $Revision: 1.9 $ um_copy_sub_pad_and_refresh.c, $Revision: 1.4 $ um_copywin.c, $Revision: 1.7 $ um_create_dialog_pad.c, $Revision: 1.23 $ um_create_map_subpads.c, $Revision: 1.3 $ um_create_movement_entry.c, $Revision: 1.5 $ um_create_pad.c, $Revision: 1.34 $ um_create_subpad_entry.c, $Revision: 1.4 $ um_create_target_data.c, $Revision: 1.4 $ um_display_msg_help.c, $Revision: 1.9 $ um_display_pad.c, $Revision: 1.9 $ um_get_local_files_and_dirs.c, $Revision: 1.4 $ um_get_remote_files_and_dirs.c, $Revision: 1.3 $ um_handle_interrupt.c, $Revision: 1.8 $ um_handle_map_input.c, $Revision: 1.9 $ um_handle_other_input.c, $Revision: 1.42 $ um_handle_view_input.c, $Revision: 1.6 $ um_map_special_keys.c, $Revision: 1.2 $ um_move_to_entry.c, $Revision: 1.14 $ um_move_to_next.c, $Revision: 1.4 $ um_move_to_prev.c, $Revision: 1.4 $ um_prepend_button.c, $Revision: 1.6 $ um_read_lines_into_pad.c, $Revision: 1.6 $ um_read_subpad_line.c, $Revision: 1.3 $ um_redraw_buttons.c, $Revision: 1.4 $ um_refresh_keys.c, $Revision: 1.23 $ um_refresh_map_widget.c, $Revision: 1.6 $ um_refresh_pad.c, $Revision: 1.13 $ um_refresh_screen.c, $Revision: 1.11 $ um_refresh_view_widget.c, $Revision: 1.4 $ um_start_loc_id_help.c, $Revision: 1.16 $ um_toggle_select_for_entry.c, $Revision: 1.2 $ um_unselect_all_in_pad.c, $Revision: 1.2 $ um_update_cursor.c, $Revision: 1.5 $ um_update_map_entries.c, $Revision: 1.3 $ um_update_map_prompt.c, $Revision: 1.2 $ um_update_map_titles.c, $Revision: 1.5 $ um_update_map_widget.c, $Revision: 1.7 $ um_update_other_widget.c, $Revision: 1.22 $ um_update_text_widget.c, $Revision: 1.3 $ um_update_view_widget.c, $Revision: 1.2 $ /usr/sbin/stm/lib/libdiagux.sl: ti_change_box_attributes.c, $Revision: 1.6 $ ti_close_target.c, $Revision: 1.3 $ ti_destroy_dialog_box.c, $Revision: 1.7 $ ti_get_input.c, $Revision: 1.8 $ ti_select_dialog_box.c, $Revision: 1.2 $ ti_update_dialog_box.c, $Revision: 1.5 $ ti_update_menu.c, $Revision: 1.5 $ ti_update_screen.c, $Revision: 1.1 $ ux_build_bool_widget.c, $Revision: 1.1 $ ux_build_int_widget.c, $Revision: 1.2 $ ux_build_label_widget.c, $Revision: 1.1 $ ux_build_rad_butn_widget.c, $Revision: 1.1 $ ux_build_separator_widget.c, $Revision: 1.2 $ ux_build_string_widget.c, $Revision: 1.2 $ ux_build_present_widget.c, $Revision: 1.4 $ ux_destroy_dialog_box_callback.c, $Revision: 1.3 $ ux_dialog_widget_callback.c, $Revision: 1.9 $ ux_dispatch_help_callback.c, $Revision: 1.3 $ ux_display_error.c, $Revision: 1.4 $ ux_get_callback_info.c, $Revision: 1.1 $ ux_lib_rev.c, $Revision: 1.2 $ ux_return_input.c, $Revision: 1.2 $ ux_set_selection_resources.c, $Revision: 1.2 $ ux_multi_file_spec_dir_search_proc.c, $Revision: 1.8 $ ux_multi_file_spec_file_search_proc.c, $Revision: 1. 3 $ ux_multi_file_spec_select_cb.c, $Revision: 1.3 $ ux_text_abort_callback.c, $Revision: 1.3 $ ux_text_interrupt_callback.c, $Revision: 1.3 $ ti_create_dialog_box.c, $Revision: 1.66 $ ti_open_target.c, $Revision: 1.12 $ ti_select_widget.c, $Revision: 1.4 $ ti_show_help.c, $Revision: 1.7 $ ux_build_button_widget.c, $Revision: 1.3 $ ux_build_date_time_widget.c, $Revision: 1.2 $ ux_build_file_spec_widget.c, $Revision: 1.8 $ ux_build_float_widget.c, $Revision: 1.2 $ ux_build_graphical_map.c, $Revision: 1.8 $ ux_build_interactive_widget.c, $Revision: 1.2 $ ux_build_list_widget.c, $Revision: 1.6 $ ux_build_double_widget.c, $Revision: 1.4 $ ux_build_multi_file_spec_widget.c, $Revision: 1.6 $ ux_build_text_widget.c, $Revision: 1.11 $ ux_build_map_widget.c, $Revision: 1.7 $ ux_build_text_map.c, $Revision: 1.7 $ ux_build_view_widget.c, $Revision: 1.11 $ ux_build_uint_widget.c, $Revision: 1.1 $ ux_button_noverify_callback.c, $Revision: 1.6 $ ux_checkbox_callback.c, $Revision: 1.4 $ ux_dialog_focus_callback.c, $Revision: 1.6 $ ux_get_vars_from_x.c, $Revision: 1.24 $ ux_get_xmstring_from_cat.c, $Revision: 1.2 $ ux_graph_map_select_event_handler.c, $Revision: 1.5 $ ux_interactive_input_callback.c, $Revision: 1.2 $ ux_list_add_callback.c, $Revision: 1.6 $ ux_list_delete_callback.c, $Revision: 1.5 $ ux_make_callback_info.c, $Revision: 1.2 $ ux_make_label.c, $Revision: 1.3 $ ux_make_tool_popup_menu.c, $Revision: 1.3 $ ux_menu_command_callback.c, $Revision: 1.4 $ ux_radio_button_callback.c, $Revision: 1.4 $ ux_set_map_device_string.c, $Revision: 1.2 $ ux_text_map_callback.c, $Revision: 1.2 $ ux_update_date_time_widget.c, $Revision: 1.1 $ ux_update_dialog_box.c, $Revision: 1.33 $ ux_update_graphical_map.c, $Revision: 1.12 $ ux_update_text_map.c, $Revision: 1.4 $ ux_make_tool_popup_menu.c, $Revision: 1.1 $ ux_update_view_widget.c, $Revision: 1.1 $ XyTree.c, $Revision: 1.1 $, $Date: 95/10/19 08:31:42 $ /usr/sbin/stm/ui/bin/stm: GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_LICENSE.C, $Revision: 1.24 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DECODE_STABLE_STORAGE.C, $Revision: 1.5 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_HVERSION.C, $Revision: 1.12 $ MAKE_LIC_AR.H, $Revision: 1.32 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ IS_RCO_LICENSE_INSTALLED.C, $Revision: 1.6 $ LIC_GET_DATE.C, $Revision: 1.5 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ READ_FROM_SS.C, $Revision: 1.5 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ CONVERT_DATE, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ stm.c, $Revision: 1.32.2.1 $ stm_prog_rev.c, $Revision: 1.2 $ cc_init_main_window.c, $Revision: 1.19 $ cc_main_loop.c, $Revision: 1.21 $ cc_read_startup_files.c, $Revision: 1.8 $ cc_ui_sig_handler.c, $Revision: 1.4 $ cc_execute_client_event.c, $Revision: 1.11 $ cc_abort_cmd_file.c, $Revision: 1.1 $ cc_abort_interactive_tool.c, $Revision: 1.4 $ cc_cstm_help_viewer.c, $Revision: 1.12 $ cc_file_viewer.c, $Revision: 1.37 $ cc_abort_int_tool_done_func.c, $Revision: 1.4 $ cc_abort_log_formatter_done_func.c, $Revision: 1.3 $ cc_cstm_dump_file.c, $Revision: 1.5 $ cc_cstm_help_viewer_done_func.c, $Revision: 1.3 $ cc_cstm_view_file.c, $Revision: 1.4 $ cc_exit_help.c, $Revision: 1.4 $ cc_free_help_locid_list.c, $Revision: 1.1 $ cc_gettopicdata.c, $Revision: 1.2 $ cc_new_help_locid.c, $Revision: 1.2 $ cc_select_help_home_topic.c, $Revision: 1.3 $ cc_select_help_prev_topic.c, $Revision: 1.3 $ cc_mc_exit.c, $Revision: 1.7 $ cc_mc_os.c, $Revision: 1.1 $ cc_mc_recordcmdfile.c, $Revision: 1.8 $ cc_mc_recordmap.c, $Revision: 1.5 $ cc_mc_recordoutput.c, $Revision: 1.9 $ cc_mc_rereaduutconfig.c, $Revision: 1.3 $ cc_mc_resetsysactlog.c, $Revision: 1.1 $ cc_mc_restoreconfig.c, $Revision: 1.7 $ cc_mc_runcmdfile.c, $Revision: 1.10 $ cc_mc_saveconfig.c, $Revision: 1.1 $ cc_mc_stoprecordcmd.c, $Revision: 1.8 $ cc_mc_stoprecordout.c, $Revision: 1.6 $ cc_exit_done_func.c, $Revision: 1.2 $ cc_saveconfig_done_func.c, $Revision: 1.7 $ cc_recordcmdfile_done_func.c, $Revision: 1.11 $ cc_recordoutput_done_func.c, $Revision: 1.12 $ cc_restoreconfig_done_func.c, $Revision: 1.4 $ cc_runcmdfile_done_func.c, $Revision: 1.7 $ cc_mc_connectsys.c, $Revision: 1.3 $ cc_mc_deinstalllic.c, $Revision: 1.3 $ cc_mc_disconnectsys.c, $Revision: 1.1 $ cc_mc_displaylic.c, $Revision: 1.1 $ cc_mc_hplicense.c, $Revision: 1.2 $ cc_mc_license.c, $Revision: 1.3 $ cc_mc_printmap.c, $Revision: 1.6 $ cc_mc_rescanhw.c, $Revision: 1.2 $ cc_mc_savemap.c, $Revision: 1.4 $ cc_mc_selcurrentsys.c, $Revision: 1.3 $ ccu_disconnect_system.c, $Revision: 1.14 $ cc_connectsys_done_func.c, $Revision: 1.8 $ cc_deinstall_confirm_done_func.c, $Revision: 1.3 $ cc_disconnectsys_done_func.c, $Revision: 1.3 $ cc_disconnect_system_done_func.c, $Revision: 1.4 $ cc_host_info_superlist_callback.c, $Revision: 1.19 $ cc_hplicense_done_func.c, $Revision: 1.5 $ cc_license_done_func.c, $Revision: 1.6 $ cc_rescanhw_done_func.c, $Revision: 1.7 $ cc_savemap_done_func.c, $Revision: 1.6 $ cc_selcurrentsys_done_func.c, $Revision: 1.9 $ ccu_assemble_host_list_items.c, $Revision: 1.6 $ ccu_build_host_superlist_msgs.c, $Revision: 1.3 $ ccu_free_host_info_list_vars.c, $Revision: 1.1 $ ccu_free_host_info_superlist_vars.c, $Revision: 1.3 $ ccu_setup_host_info_list_vars.c, $Revision: 1.3 $ ccu_setup_host_info_superlist_vars.c, $Revision: 1.5 $ ccu_setup_license_dialog_vars.c, $Revision: 1.2 $ cc_connectsys_logon_done_func.c, $Revision: 1.8 $ cc_selcurrentsys_logon_done_func.c, $Revision: 1.8 $ ccu_build_host_info_list_item.c, $Revision: 1.5 $ ccu_check_license_expiration_date.c, $Revision: 1.2 $ ccu_connection_logon.c, $Revision: 1.6 $ ccu_new_currentsys.c, $Revision: 1.18 $ ccu_next_sel_host_list_item.c, $Revision: 1.6 $ ccu_setup_host_info.c, $Revision: 1.8 $ ccu_connect_system.c.c, $Revision: 1.8 $ ccu_get_host_info.c, $Revision: 1.8 $ cc_diagoptions_init.c, $Revision: 1.1 $ cc_exeroptions_init.c, $Revision: 1.2 $ cc_expoptions_init.c, $Revision: 1.1 $ cc_fwupoptions_init.c, $Revision: 1.2 $ cc_genoptions_init.c, $Revision: 1.10 $ cc_idoptions_init.c, $Revision: 1.1 $ cc_launoptions_init.c, $Revision: 1.8 $ cc_mc_diagoptions.c, $Revision: 1.7 $ cc_mc_exeroptions.c, $Revision: 1.6 $ cc_mc_expoptions.c, $Revision: 1.4 $ cc_mc_fwupdateoptions.c, $Revision: 1.7 $ cc_mc_generaloptions.c, $Revision: 1.17 $ cc_mc_idoptions.c, $Revision: 1.4 $ cc_mc_launchoptions.c, $Revision: 1.9 $ cc_mc_utiloptions.c, $Revision: 1.5 $ cc_mc_veroptions.c, $Revision: 1.6 $ cc_utiloptions_init.c, $Revision: 1.1 $ cc_veroptions_init.c, $Revision: 1.1 $ cc_mc_mapoptions.c, $Revision: 1.11 $ cc_mc_cleartoolstatus.c, $Revision: 1.7 $ cc_mc_currdevstatus.c, $Revision: 1.14 $ cc_mc_selall.c, $Revision: 1.6 $ cc_mc_selclass.c, $Revision: 1.8 $ cc_mc_unselall.c, $Revision: 1.6 $ cc_mc_unselclass.c, $Revision: 1.9 $ cc_selclass_done_func.c, $Revision: 1.8 $ cc_unselclass_done_func.c, $Revision: 1.8 $ cc_mc_aborttool.c, $Revision: 1.3 $ cc_mc_abortutil.c, $Revision: 1.4 $ cc_mc_attach.c, $Revision: 1.2 $ cc_mc_diaginfo.c, $Revision: 1.6 $ cc_mc_diagnose.c, $Revision: 1.3 $ cc_mc_displayquery.c, $Revision: 1.3 $ cc_mc_exercise.c, $Revision: 1.3 $ cc_mc_exerinfo.c, $Revision: 1.6 $ cc_mc_experttool.c, $Revision: 1.6 $ cc_mc_expinfo.c, $Revision: 1.6 $ cc_mc_firmwareupdate.c, $Revision: 1.6 $ cc_mc_fwinfo.c, $Revision: 1.6 $ cc_mc_infoinfo.c, $Revision: 1.5 $ cc_mc_information.c, $Revision: 1.4 $ cc_mc_resumetool.c, $Revision: 1.3 $ cc_mc_runutility.c, $Revision: 1.5 $ cc_mc_suspendtool.c, $Revision: 1.3 $ cc_mc_utilinfo.c, $Revision: 1.6 $ cc_mc_verify.c, $Revision: 1.3 $ cc_mc_verinfo.c, $Revision: 1.5 $ cc_mc_wait.c, $Revision: 1.5 $ cc_wait_check.c, $Revision: 1.7 $ ccu_process_query_pending.c, $Revision: 1.6 $ cc_abort_util_done_func.c, $Revision: 1.4 $ cc_attach_done_func.c, $Revision: 1.1 $ ccu_chk_valid_init_tool_dev.c, $Revision: 1.5 $ ccu_display_info.c, $Revision: 1.8 $ ccu_initiate_st.c, $Revision: 1.4 $ ccu_monitor_dialog_port.c, $Revision: 1.5 $ ccu_setup_util_list.c, $Revision: 1.5 $ ccu_start_non_init_tool.c, $Revision: 1.3 $ ccu_create_info_log.c, $Revision: 1.1 $ ccu_display_info.c, $Revision: 1.1 $ cc_mc_help.c, $Revision: 1.3 $ cc_mc_helponapplication.c, $Revision: 1.1 $ cc_mc_helponhelp.c, $Revision: 1.1 $ cc_mc_helponitem.c, $Revision: 1.1 $ cc_mc_helpontasks.c, $Revision: 1.1 $ cc_mc_helponmenu.c, $Revision: 1.1 $ cc_mc_helponhome.c, $Revision: 1.1 $ cc_mc_helponversion.c, $Revision: 1.4 $ cc_init_map_read_proc.c, $Revision: 1.9 $ cc_load_uut_status.c, $Revision: 1.21 $ cc_map_callback.c, $Revision: 1.6 $ ccu_signal_map_config_update.c, $Revision: 1.5 $ ccu_signal_map_update.c, $Revision: 1.6 $ ccu_write_map_read_proc_config.c, $Revision: 1.7 $ ccu_map_signal_error.c, $Revision: 1.1 $ ccu_append_device_str.c, $Revision: 1.3 $ ccu_append_strings.c, $Revision: 1.4 $ ccu_base_cmd_set.c, $Revision: 1.4 $ ccu_build_in_progress.c, $Revision: 1.4 $ ccu_cleanup_and_exit.c, $Revision: 1.12 $ ccu_clear_map.c, $Revision: 1.5 $ ccu_close_command_file.c, $Revision: 1.13 $ ccu_copy_ll_msg.c, $Revision: 1.2 $ ccu_copy_string_with_pad_trunc.c, $Revision: 1.1 $ ccu_count_util_list_type.c, $Revision: 1.2 $ ccu_create_stm_banner.c, $Revision: 1.2 $ ccu_device_main_menu_cmds.c, $Revision: 1.17 $ ccu_disconnect_cmd.c, $Revision: 1.1 $ ccu_disconnect_current_for_error.c, $Revision: 1.7 $ ccu_display_complex_info.c, $Revision: 1.9 $ ccu_display_error_msg.c, $Revision: 1.6 $ ccu_display_simple_info.c, $Revision: 1.4 $ ccu_expand_ll_msg.c, $Revision: 1.9 $ ccu_fill_util_list_type.c, $Revision: 1.2 $ ccu_get_ll_msg_info.c, $Revision: 1.3 $ ccu_get_util_list.c, $Revision: 1.4 $ ccu_initial_main_menu_cmds.c, $Revision: 1.2 $ ccu_loading_map.c, $Revision: 1.3 $ ccu_log_and_display_complex_error.c, $Revision: 1.10 $ ccu_log_and_display_simple_error.c, $Revision: 1.10 $ ccu_log_malloc_error_and_exit.c, $Revision: 1.8 $ ccu_make_filter_file_path.c, $Revision: 1.18 $ make_tmp_dir_path.c, $Revision: 1.2 $ ccu_menu_chg.c, $Revision: 1.4 $ ccu_pg_api_error.c, $Revision: 1.14 $ ccu_print_dialog_setup.c, $Revision: 1.16 $ ccu_rcrd_menu_cmds.c, $Revision: 1.6 $ ccu_remove_file.c, $Revision: 1.4 $ ccu_run_command_file.c, $Revision: 1.18 $ ccu_signal.c, $Revision: 1.8 $ ccu_ui_api_error.c, $Revision: 1.4 $ ccu_update_map.c, $Revision: 1.2 $ ccu_uut_main_menu_cmds.c, $Revision: 1.4 $ cc_loading_map_done_func.c, $Revision: 1.1 $ ccu_abort_cmd_file_done_func.c, $Revision: 1.6 $ ccu_build_in_progress_cmds.c, $Revision: 1.1 $ ccu_set_avail_util_ops.c, $Revision: 1.3 $ ccu_signal_terminate_map_proc.c, $Revision: 1.6 $ ccu_tool_management_cmds.c, $Revision: 1.7 $ ccu_utility_control_cmds.c, $Revision: 1.2 $ /usr/sbin/stm/ui/bin/stm_map_read: GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_LICENSE.C, $Revision: 1.24 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DECODE_STABLE_STORAGE.C, $Revision: 1.5 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_HVERSION.C, $Revision: 1.12 $ MAKE_LIC_AR.H, $Revision: 1.32 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ IS_RCO_LICENSE_INSTALLED.C, $Revision: 1.6 $ LIC_GET_DATE.C, $Revision: 1.5 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ READ_FROM_SS.C, $Revision: 1.5 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ CONVERT_DATE, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ cc_map_read_proc.c, $Revision: 1.20 $ cc_map_read_proc_sig_handler.c, $Revision: 1.6 $ ccu_cleanup_and_exit.c, $Revision: 1.6 $ map_prog_rev.c, $Revision: 1.1 $ map_stubs.c, $Revision: 1.2 $ ui_log_ll_msg.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/sys/diagmond: GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_LICENSE.C, $Revision: 1.24 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DECODE_STABLE_STORAGE.C, $Revision: 1.5 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_HVERSION.C, $Revision: 1.12 $ MAKE_LIC_AR.H, $Revision: 1.32 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ IS_RCO_LICENSE_INSTALLED.C, $Revision: 1.6 $ LIC_GET_DATE.C, $Revision: 1.5 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ READ_FROM_SS.C, $Revision: 1.5 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ CONVERT_DATE, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ diagmond_main.c, $Revision: 1.22 $ ms_make_daemon.c, $Revision: 1.3 $ ms_init_manage_sys.c, $Revision: 1.10.1.1 $ ms_build_status_map.c, $Revision: 1.10 $ ms_setup_scan_hw_sys_global.c, $Revision: 1.2 $ ms_check_uut_status.c, $Revision: 1.3 $ ms_scan_children.c, $Revision: 1.5 $ ms_get_valid_request.c, $Revision: 1.16 $ ms_handle_access_dev.c, $Revision: 1.6 $ ms_handle_access_request.c, $Revision: 1.2 $ ms_handle_release_dev.c, $Revision: 1.5 $ ms_handle_device_request.c, $Revision: 1.6 $ ms_handle_get_query.c, $Revision: 1.6 $ ms_handle_host_info_request.c, $Revision: 1.4 $ ms_handle_update_session_lic.c, $Revision: 1.3 $ ms_handle_install_lic.c, $Revision: 1.5 $ ms_handle_deinstall_lic.c, $Revision: 1.2 $ ms_handle_system_request.c, $Revision: 1.5 $ ms_handle_test_progress.c, $Revision: 1.14 $ ms_handle_admin_request.c, $Revision: 1.20 $ ms_handle_download_request.c, $Revision: 1.11 $ ms_handle_reread_lic.c, $Revision: 1.4 $ ms_recreate_mon_uut_status.c, $Revision: 1.4 $ ms_handle_reset_ops.c, $Revision: 1.4 $ ms_handle_reread_ops.c, $Revision: 1.3 $ ms_handle_reset_act_log.c, $Revision: 1.5 $ ms_handle_get_files_dirs_request.c, $Revision: 1.5 $ mon_add_sop_parm.c, $Revision: 1.3 $ ms_handle_control.c, $Revision: 1.10 $ ms_handle_test_request.c, $Revision: 1.15 $ ms_handle_uut_release.c, $Revision: 1.8 $ ms_handle_uut_setup.c, $Revision: 1.15 $ ms_handle_start.c, $Revision: 1.8 $ ms_validate_user.c, $Revision: 1.8 $ ms_setup_mon_uut_status.c, $Revision: 1.8 $ ms_create_mon_uut_status.c, $Revision: 1.9 $ ms_recreate_mon_uut_status.c, $Revision: 1.4 $ ms_cleanup_for_exited_ui.c, $Revision: 1.19 $ /usr/sbin/stm/uut/bin/tools/diagnose/atmd: atmdevdl.c, $Revision: 1.3 $ atmdevmg.c, $Revision: 1.3 $ atmdiag.c, $Revision: 1.3 $ atmdl.c, $Revision: 1.3 $ atmdm.c, $Revision: 1.4 $ atmdmcon.c, $Revision: 1.3 $ atmdmide.c, $Revision: 1.3 $ atmdmio.c, $Revision: 1.4 $ atmdmloo.c, $Revision: 1.4 $ atmdmpol.c, $Revision: 1.3 $ atmdmsig.c, $Revision: 1.3 $ atmlb.c, $Revision: 1.4 $ atmlog.c, $Revision: 1.3 $ access_device.c, $Revision: 1.2 $ check_and_report_progress.c, $Revision: 1.2 $ check_for_done.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.2 $ diagnose_device.c, $Revision: 1.2 $ init_tool_control.c, $Revision: 1.1 $ perform_diagnose.c, $Revision: 1.2 $ query_user.c, $Revision: 1.2 $ release_device.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/diagnose/psid: psidad.c, $Revision: 1.3 $ psidm.c, $Revision: 1.5 $ psidmio.c, $Revision: 1.2 $ psidmsig.c, $Revision: 1.1 $ psilog.c, $Revision: 1.3 $ psidiag.c, $Revision: 1.2 $ psidar.c, $Revision: 1.2 $ psidautil.c, $Revision: 1.2 $ psidaquix.c, $Revision: 1.2 $ psidasec.c, $Revision: 1.3 $ access_device.c, $Revision: 1.2 $ check_and_report_progress.c, $Revision: 1.1 $ check_for_done.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ diagnose_device.c, $Revision: 1.2 $ init_tool_control.c, $Revision: 1.2 $ perform_diagnose.c, $Revision: 1.3 $ query_user.c, $Revision: 1.2 $ release_device.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/tools/diagnose/diag_dds: call_scsi_dev_io.c, $Revision: 1.1 $ check_and_report_progress.c, $Revision: 1.1 $ check_for_done.c, $Revision: 1.1 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ decode_error.c, $Revision: 1.2 $ diagnose_device.c, $Revision: 1.1 $ diagnose_mech.c, $Revision: 1.6 $ diagnose_mod.c, $Revision: 1.3 $ exec_check_log.c, $Revision: 1.2 $ exec_clear_log.c, $Revision: 1.1 $ exec_max_coverage.c, $Revision: 1.3 $ exec_mode_select.c, $Revision: 1.1 $ exec_mode_sense.c, $Revision: 1.1 $ exec_predict.c, $Revision: 1.1 $ exec_tur.c, $Revision: 1.1 $ exec_unload.c, $Revision: 1.1 $ init_tool_control.c, $Revision: 1.1 $ perform_diagnose.c, $Revision: 1.3 $ query_user.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/diagnose/diag_dlt: call_scsi_dev_io.c, $Revision: 1.1 $ check_and_report_progress.c, $Revision: 1.1 $ check_for_done.c, $Revision: 1.1 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ diagnose_device.c, $Revision: 1.2 $ diagnose_mech.c, $Revision: 1.3 $ decode_error.c, $Revision: 1.3 $ diagnose_mod.c, $Revision: 1.1 $ exec_log_test.c, $Revision: 1.2 $ exec_tur.c, $Revision: 1.1 $ init_tool_control.c, $Revision: 1.1 $ perform_diagnose.c, $Revision: 1.2 $ query_user.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/diagnose/scsi_mux: sm_diag_main.c, $Revision: 1.1 $ access_device.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.2 $ perform_diagnose.c, $Revision: 1.1 $ query_user.c, $Revision: 1.1 $ diagnose_device.c, $Revision: 1.1 $ perform_self_test.c, $Revision: 1.4 $ setup_device_access.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/exercise/graphics: access_device.c, $Revision: 1.5 $ array_memory_tst.c, $Revision: 1.1 $ blt_tst.c, $Revision: 1.2 $ check_and_report_progress.c, $Revision: 1.2 $ check_for_done.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ clipping_tst.c, $Revision: 1.1 $ exercise_device.c, $Revision: 1.5 $ exercise_mod.c, $Revision: 1.2 $ fill_tst.c, $Revision: 1.1 $ grt_tests.c, $Revision: 1.6 $ g3d_tests1.c, $Revision: 1.5 $ g3d_tests2.c, $Revision: 1.5 $ g3d_tests3.c, $Revision: 1.12 $ raster_op_tst.c, $Revision: 1.2 $ starbase_fb_tst.c, $Revision: 1.1 $ grt_utilities.c, $Revision: 1.10 $ init_tool_control.c, $Revision: 1.1 $ main_mem_blt_tst.c, $Revision: 1.1 $ memory_accces_tst.c, $Revision: 1.1 $ perform_exercise.c, $Revision: 1.2 $ read_3d_dev_info.c, $Revision: 1.6 $ setup_device_access.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.6 $ vector_draw_tst.c, $Revision: 1.3 $ visual_tst.c, $Revision: 1.5 $ GRAPHICS CORE R1020 BRANCH 960417 libdd98704.a $Revi sion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libdd98705.a $Revi sion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libdd98735.a $Revi sion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libdd98736.a $Revi sion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libddcrx48z $Revis ion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libdddl.a $Revisio n: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libddgcrx $Revisio n: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libddhyper $Revisi on: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libddhcrx48 $Revis ion: 550.1.100.2 $ GRAPHICS CORE R1020 BRANCH 960417 libddhpcgm.a $Revi sion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libXwindow.a $Revi sion: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libsga $Revision: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libsb1.a $Revision : 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libddnull $Revisio n: 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libddvmx $Revision : 550.1.100.1 $ GRAPHICS CORE R1020 BRANCH 960417 libsb2.a $Revision : 550.1.100.1 $ /usr/sbin/stm/uut/bin/tools/exercise/lan: exercise_mod.c, $Revision: 1.12 $ access_device.c, $Revision: 1.13 $ perform_exercise.c, $Revision: 1.5 $ exercise_device.c, $Revision: 1.4 $ host.c, $Revision: 1.11 $ packet.c, $Revision: 1.16 $ exercise_network_hardware.c, $Revision: 1.5 $ setup_device_access.c, $Revision: 1.6 $ setup_global_dev_info.c, $Revision: 1.5 $ cleanup_and_exit.c, $Revision: 1.5 $ /usr/sbin/stm/uut/bin/tools/exercise/memory: memdaf.c, $Revision: 1.9 $, $Date: 96/08/02 13:39:47 $ exercise_mod.c, $Revision: 1.3 $ cleanup_and_exit.c, $Revision: 1.4 $ perform_exercise.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.3 $ exercise_device.c, $Revision: 1.3 $ log_msg.c, $Revision: 1.1 $ release_device.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/expert/scsi_dds: call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ chg_active_partition.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.1 $ create_temp_file.c, $Revision: 1.2 $ decode_io_status.c, $Revision: 1.1 $ display_caution.c, $Revision: 1.1 $ display_continue.c, $Revision: 1.1 $ display_help_loc_id.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_clear_log.c, $Revision: 1.3 $ do_describe.c, $Revision: 1.1 $ do_display_both.c, $Revision: 1.1 $ do_display_hex.c, $Revision: 1.1 $ do_display_interpreted.c, $Revision: 1.1 $ do_exit.c, $Revision: 1.1 $ do_general_help.c, $Revision: 1.3 $ do_mode_sense.c, $Revision: 1.3 $ do_prevent_allow.c, $Revision: 1.1 $ do_rewind.c, $Revision: 1.3 $ do_selftest.c, $Revision: 1.5 $ do_tape_copy.c, $Revision: 1.6 $ do_tape_info.c, $Revision: 1.1 $ do_tur.c, $Revision: 1.3 $ do_unload_tape.c, $Revision: 1.2 $ do_validate.c, $Revision: 1.4 $ do_version_help.c, $Revision: 1.1 $ do_view_bad_grp_log.c, $Revision: 1.3 $ do_view_cap_log.c, $Revision: 1.3 $ do_view_eeprom_log.c, $Revision: 1.4 $ do_view_parm_log.c, $Revision: 1.3 $ do_view_trace_log.c, $Revision: 1.6 $ exec_clear_log.c, $Revision: 1.2 $ exec_mode_select.c, $Revision: 1.1 $ exec_mode_sense.c, $Revision: 1.1 $ exec_read.c, $Revision: 1.2 $ exec_view_log.c, $Revision: 1.5 $ expert_main.c, $Revision: 1.6 $ expert_mod.c, $Revision: 1.4 $ expert_setup.c, $Revision: 1.2 $ get_tapecopy_target.c, $Revision: 1.2 $ handle_interrupt.c, $Revision: 1.1 $ output_hex.c, $Revision: 1.2 $ pulse.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ remove_file.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/expert/scsi_dlt: call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ create_temp_file.c, $Revision: 1.2 $ decode_io_status.c, $Revision: 1.2 $ display_caution.c, $Revision: 1.2 $ display_continue.c, $Revision: 1.2 $ display_help_loc_id.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_clear_log.c, $Revision: 1.2 $ do_describe.c, $Revision: 1.3 $ do_display_both.c, $Revision: 1.1 $ do_display_hex.c, $Revision: 1.1 $ do_display_interpreted.c, $Revision: 1.1 $ do_drv_info.c, $Revision: 1.3 $ do_exit.c, $Revision: 1.1 $ do_general_help.c, $Revision: 1.2 $ do_mode_sense.c, $Revision: 1.2 $ do_prevent_allow.c, $Revision: 1.1 $ do_rewind.c, $Revision: 1.3 $ do_selftest.c, $Revision: 1.4 $ do_tape_copy.c, $Revision: 1.5 $ do_tur.c, $Revision: 1.2 $ do_unload_tape.c, $Revision: 1.2 $ do_validate.c, $Revision: 1.4 $ do_version_help.c, $Revision: 1.1 $ do_view_parm_log.c, $Revision: 1.3 $ exec_clear_log.c, $Revision: 1.2 $ exec_mode_select.c, $Revision: 1.2 $ exec_mode_sense.c, $Revision: 1.1 $ exec_read.c, $Revision: 1.2 $ exec_view_log.c, $Revision: 1.3 $ expert_main.c, $Revision: 1.4 $ expert_mod.c, $Revision: 1.4 $ expert_setup.c, $Revision: 1.2 $ get_tapecopy_target.c, $Revision: 1.2 $ handle_interrupt.c, $Revision: 1.1 $ output_hex.c, $Revision: 1.1 $ pulse.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ remove_file.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/expert/scsi_lib: expert_mod.c, $Revision: 1.4 $ expert_main.c, $Revision: 1.2 $ call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ create_temp_file.c, $Revision: 1.1 $ decode_io_status.c, $Revision: 1.3 $ display_caution.c, $Revision: 1.1 $ display_continue.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_help_loc_id.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_describe.c, $Revision: 1.1 $ do_display_both.c, $Revision: 1.1 $ do_display_hex.c, $Revision: 1.1 $ do_display_interpreted.c, $Revision: 1.1 $ do_exit.c, $Revision: 1.1 $ do_general_help.c, $Revision: 1.1 $ do_info.c, $Revision: 1.4 $ do_logs.c, $Revision: 1.3 $ do_tests.c, $Revision: 1.2 $ do_utility.c, $Revision: 1.5 $ do_version_help.c, $Revision: 1.1 $ expert_setup.c, $Revision: 1.1 $ handle_interrupt.c, $Revision: 1.1 $ output_hex.c, $Revision: 1.1 $ release_device.c, $Revision: 1.2 $ remove_file.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/fw_update/fc_adaptor: fw_update_mod.c, $Revision: 1.10 $ bank_erase.c, $Revision: 1.9 $ bank_switch.c, $Revision: 1.9 $ bank_write.c, $Revision: 1.10 $ access_device.c, $Revision: 1.9 $ cleanup_and_exit.c, $Revision: 1.9 $ display_caution.c, $Revision: 1.9 $ display_continue.c, $Revision: 1.9 $ display_help_loc_id.c, $Revision: 1.9 $ display_help_msg.c, $Revision: 1.9 $ display_main.c, $Revision: 1.9 $ do_exit.c, $Revision: 1.9 $ do_fw_update.c, $Revision: 1.12 $ do_general_help.c, $Revision: 1.9 $ do_select_file.c, $Revision: 1.9 $ do_version_help.c, $Revision: 1.9 $ delay.c, $Revision: 1.9 $ fw_update_main.c, $Revision: 1.9 $ fw_update_setup.c, $Revision: 1.9 $ get_fw_update_file.c, $Revision: 1.10 $ handle_interrupt.c, $Revision: 1.9 $ iodc_ioctl.c, $Revision: 1.10 $ read_fw_update_file.c, $Revision: 1.9 $ release_device.c, $Revision: 1.9 $ setup_device_access.c, $Revision: 1.9 $ setup_global_dev_info.c, $Revision: 1.9 $ validate_fw_update_file.c, $Revision: 1.9 $ decode_errno.c, $Revision: 1.9 $ process_iotree.c, $Revision: 1.9 $ create_device.c, $Revision: 1.9 $ object_file_access.c, $Revision: 1.10 $ /usr/sbin/stm/uut/bin/tools/fw_update/scsi_mux: fw_update_mod.c, $Revision: 1.2 $ access_device.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.3 $ display_caution.c, $Revision: 1.2 $ display_continue.c, $Revision: 1.2 $ display_help_loc_id.c, $Revision: 1.2 $ display_help_msg.c, $Revision: 1.2 $ display_main.c, $Revision: 1.2 $ do_exit.c, $Revision: 1.2 $ do_fw_update.c, $Revision: 1.4 $ do_general_help.c, $Revision: 1.2 $ do_select_file.c, $Revision: 1.2 $ do_version_help.c, $Revision: 1.2 $ fw_update_main.c, $Revision: 1.3 $ fw_update_setup.c, $Revision: 1.2 $ get_fw_update_file.c, $Revision: 1.2 $ handle_interrupt.c, $Revision: 1.2 $ read_fw_update_file.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.3 $ validate_fw_update_file.c, $Revision: 1.3 $ download.c, $Revision: 1.5 $ send_to_device.c, $Revision: 1.2 $ reset_device.c, $Revision: 1.3 $ object_file_access.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/fw_update/scsi_disk: fw_update_mod.c, $Revision: 1.9 $ cleanup_and_exit.c, $Revision: 1.12 $ display_caution.c, $Revision: 1.3 $ display_continue.c, $Revision: 1.3 $ display_help_loc_id.c, $Revision: 1.3 $ display_help_msg.c, $Revision: 1.3 $ display_main.c, $Revision: 1.3 $ do_exit.c, $Revision: 1.4 $ do_fw_update.c, $Revision: 1.16 $ do_general_help.c, $Revision: 1.2 $ do_select_file.c, $Revision: 1.4 $ do_version_help.c, $Revision: 1.3 $ fw_update_main.c, $Revision: 1.12 $ fw_update_setup.c, $Revision: 1.4 $ get_fw_update_directory.c, $Revision: 1.2 $ get_fw_update_file.c, $Revision: 1.10 $ handle_interrupt.c, $Revision: 1.4 $ download.c, $Revision: 1.14 $ send_to_device.c, $Revision: 1.14 $ open_fw_update_file.c, $Revision: 1.5 $ read_fw_update_file.c, $Revision: 1.5 $ release_device.c, $Revision: 1.7 $ setup_device_access.c, $Revision: 1.19 $ setup_global_dev_info.c, $Revision: 1.13 $ validate_fw_update_file.c, $Revision: 1.11 $ /usr/sbin/stm/uut/bin/tools/id/fcp_mux: cleanup_and_exit.c, $Revision: 1.2 $ get_id_data.c, $Revision: 1.3 $ get_product.c, $Revision: 1.2 $ get_qualifier.c, $Revision: 1.2 $ fcp_mux_main.c, $Revision: 1.2 $ perform_identify.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/id/pa_module: cleanup_and_exit.c, $Revision: 1.2 $ get_id_data.c, $Revision: 1.3 $ get_product.c, $Revision: 1.24.1.1 $ get_qualifier.c, $Revision: 1.4 $ pa_module_main.c, $Revision: 1.3 $ perform_identify.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/id/graphics_id: access_device.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.2 $ get_graphics_prod_num.c, $Revision: 1.9 $ get_id_data.c, $Revision: 1.2 $ graphics_id_main.c, $Revision: 1.2 $ log_msg.c, $Revision: 1.4 $ perform_identify.c, $Revision: 1.2 $ release_device.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/info/cpu: main_cpu.c, $Revision: 1.6 $ multicpu.c, $Revision: 1.3 $ cleanup_and_exit.c, $Revision: 1.3 $ get_and_log_info_data.c, $Revision: 1.14 $ get_hpa_spa.c, $Revision: 1.4 $ get_cpu_rev.c, $Revision: 1.2 $ pdc_cache_errno_parm.c, $Revision: 1.2 $ pdc_model_errno_parm.c, $Revision: 1.2 $ get_info_data.c, $Revision: 1.7 $ get_iodc_info.c, $Revision: 1.5 $ get_slot_number.c, $Revision: 1.9 $ get_pdc_model.c, $Revision: 1.7 $ get_cversion_info.c, $Revision: 1.2 $ get_pdc_fw_rev.c, $Revision: 1.16 $ get_cache_size.c, $Revision: 1.5 $ get_pim_data.c, $Revision: 1.15 $ get_proc_speed_state.c, $Revision: 1.4 $ raw_to_digit.c, $Revision: 1.4 $ setup_device_access.c, $Revision: 1.2 $ perform_info.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.1 $ issue_io.c, $Revision: 1.4 $ format_data.c, $Revision: 1.6 $ log_message.c, $Revision: 1.7 $ /usr/sbin/stm/uut/bin/tools/info/fc_adaptor: info_mod_main.c, $Revision: 1.3 $ cleanup_and_exit.c, $Revision: 1.3 $ get_and_log_info_data.c, $Revision: 1.3 $ get_hpa_spa.c, $Revision: 1.3 $ get_info_data.c, $Revision: 1.3 $ get_iodc_info.c, $Revision: 1.3 $ get_slot_number.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.3 $ decode_errno.c, $Revision: 1.3 $ create_device.c, $Revision: 1.3 $ access_device.c, $Revision: 1.3 $ process_iotree.c, $Revision: 1.3 $ iodc_ioctl.c, $Revision: 1.3 $ release_device.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/info/graphics: information_mod.c, $Revision: 1.3 $ cleanup_and_exit.c, $Revision: 1.1 $ get_and_log_info_data.c, $Revision: 1.5 $ get_info_data.c, $Revision: 1.8 $ get_graphics_prod_num.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/info/scsi_3480: tape_info.c, $Revision: 1.3 $ access_device.c, $Revision: 1.5 $ cleanup_and_exit.c, $Revision: 1.3 $ get_and_log_info_data.c, $Revision: 1.5 $ get_info_data_3480.c, $Revision: 1.6 $ raw_to_digit.c, $Revision: 1.4 $ call_scsi_dev_io.c, $Revision: 1.7 $ do_inquiry_3480.c, $Revision: 1.8 $ get_capacity_3480.c, $Revision: 1.5 $ get_drive_status.c, $Revision: 1.6 $ decode_io_status.c, $Revision: 1.3 $ get_compress_page.c, $Revision: 1.4 $ perform_info.c, $Revision: 1.3 $ release_device.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.4 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/info/scsi_8mm: tape_info.c, $Revision: 1.7 $ access_device.c, $Revision: 1.7 $ cleanup_and_exit.c, $Revision: 1.5 $ get_and_log_info_data.c, $Revision: 1.8 $ get_info_data_8mm.c, $Revision: 1.9 $ raw_to_digit.c, $Revision: 1.6 $ do_inquiry.c, $Revision: 1.8 $ call_scsi_dev_io.c, $Revision: 1.10 $ get_fw_rev_8mm.c, $Revision: 1.6 $ get_capacity_8mm.c, $Revision: 1.12 $ get_load_count_8mm.c, $Revision: 1.6 $ get_drive_status.c, $Revision: 1.6 $ decode_io_status.c, $Revision: 1.4 $ get_wr_err_count_8mm.c, $Revision: 1.4 $ get_rd_err_count_8mm.c, $Revision: 1.4 $ get_compress_page.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.4 $ release_device.c, $Revision: 1.4 $ setup_device_access.c, $Revision: 1.5 $ setup_global_dev_info.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/info/scsi_dds: tape_info.c, $Revision: 1.7 $ access_device.c, $Revision: 1.12 $ cleanup_and_exit.c, $Revision: 1.10 $ get_and_log_info_data.c, $Revision: 1.12 $ get_info_data.c, $Revision: 1.12 $ raw_to_digit.c, $Revision: 1.8 $ do_inquiry.c, $Revision: 1.17 $ do_page_view.c, $Revision: 1.3 $ call_scsi_dev_io.c, $Revision: 1.14 $ get_fw_rev.c, $Revision: 1.10 $ get_servo_rev.c, $Revision: 1.11 $ get_capacity.c, $Revision: 1.11 $ get_capacity_8mm.c, $Revision: 1.5 $ get_load_count.c, $Revision: 1.12 $ get_drive_status.c, $Revision: 1.14 $ decode_io_status.c, $Revision: 1.7 $ get_wr_err_count.c, $Revision: 1.11 $ get_rd_err_count.c, $Revision: 1.11 $ get_compress_page.c, $Revision: 1.7 $ perform_info.c, $Revision: 1.7 $ release_device.c, $Revision: 1.5 $ setup_device_access.c, $Revision: 1.9 $ setup_global_dev_info.c, $Revision: 1.8 $ /usr/sbin/stm/uut/bin/tools/info/scsi_mux: scsi_mux_info_main.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.2 $ get_and_log_info_data.c, $Revision: 1.2 $ get_log_data.c, $Revision: 1.1 $ get_inquiry_data.c, $Revision: 1.1 $ get_info_data.c, $Revision: 1.2 $ perform_info.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.2 $ perform_inquiry.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/tools/info/scsi_qic: tape_info.c, $Revision: 1.3 $ access_device.c, $Revision: 1.6 $ cleanup_and_exit.c, $Revision: 1.4 $ get_and_log_info_data.c, $Revision: 1.7 $ get_info_data_qic.c, $Revision: 1.5 $ raw_to_digit.c, $Revision: 1.4 $ call_scsi_dev_io.c, $Revision: 1.12 $ do_inquiry_qic.c, $Revision: 1.8 $ get_serial_num_qic.c, $Revision: 1.7 $ get_drive_status.c, $Revision: 1.8 $ decode_io_status.c, $Revision: 1.5 $ get_compress_page.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.4 $ release_device.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.4 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/verify/disk: verify_mod.c, $Revision: 1.8 $ access_device.c, $Revision: 1.11 $ cleanup_and_exit.c, $Revision: 1.3 $ perform_verify.c, $Revision: 1.13 $ query_user.c, $Revision: 1.2 $ verify_device.c, $Revision: 1.7 $ verify_disk.c, $Revision: 1.16 $ decode_errno.c, $Revision: 1.7 $ diaglog_user.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.12 $ init_tool_control.c, $Revision: 1.2 $ check_and_report_progress.c, $Revision: 1.2 $ check_for_done.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.14 $ /usr/sbin/stm/uut/lib/tlidsector.sl: None /usr/sbin/stm/uut/lib/tlscsidev.sl: tlscsidev_lock.c, $Revision: 1.4 $ tlscsidev_io.c, $Revision: 1.6 $ tlscsidev_io_diag0.c, $Revision: 1.7 $ tlscsidev_io_sctl.c, $Revision: 1.8 $ tlscsidev_reset_driver.c, $Revision: 1.4 $ tlscsidev_unlock.c, $Revision: 1.4 $ tlscsidev_end.c, $Revision: 1.4 $ tlscsidev_init.c, $Revision: 1.6 $ tlscsidev_gen.c, $Revision: 1.8 $ tlscsidev_get_sti_msg.c, $Revision: 1.4 $ tlscsidev_disk_sense_decode.c, $Revision: 1.4 $ tlscsidev_tape_sense_decode.c, $Revision: 1.3 $ /usr/sbin/stm/uut/lib/tlgraphics.sl: tl_get_graphics_sti_rom_info.c, $Revision: 1.4 $ tl_get_graphics_crt_id.c, $Revision: 1.2 $ tl_log_msg.c, $Revision: 1.3 $ /var/stm/data/id_mod_xref: None /var/stm/data/prod_op_xref: None /var/stm/config/tools/diagnose/psi/psiniodl: None /var/stm/config/tools/diagnose/psi/psieisdl: None cksum(1) Output: 256171517 851968 /usr/lib/libdiag.sl 3982474058 1418124 /usr/sbin/diag/DASSDIAG 336769857 1092 /usr/sbin/diag/DIAGLIST 4267201426 44240 /usr/sbin/diag/DUIDIR 2501187266 24074 /usr/sbin/diag/IODEVACC 2356662228 60454 /usr/sbin/diag/C0008000 4202988575 175814 /usr/sbin/diag/C0012000 2788248282 72888 /usr/sbin/diag/LAYOUTF 1325713174 56295 /usr/sbin/diag/LAYMSG 3899507695 389120 /usr/sbin/diag/SCSIDDS 2478708238 303104 /usr/sbin/diag/SCSIDSK2 1224814757 110592 /usr/sbin/diag/MEMLOGP 265364672 61440 /usr/sbin/suplicen 49624524 35032 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tool_lib/tlscsidev.cat 3113789891 1146 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tool_lib/tlidsector.cat 1308922389 5081 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tool_lib/tlgraphics.cat 3084604709 40261 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/diagnose/atmd.cat 2289228179 30845 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/diagnose/psid.cat 1512390251 35972 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/diagnose/diag_dds.cat 2740346953 17972 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/diagnose/diag_dlt.cat 1328519330 6943 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ diagnose/scsi_mux.cat 3974820165 22377 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/exercise/disk.cat 4108753911 12812 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/exercise/lan.cat 2321953332 6278 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ exercise/memory.cat 3081994251 71511 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_dds.cat 4226516710 15966 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_ddsc00.ht 606105989 4431 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_ddsc.hv 2820968767 2826 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_ddsc.hvk 1927578002 16154 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_ddsm00.ht 2038948742 4424 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_ddsm.hv 3081593111 3016 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_ddsm.hvk 1163409006 18312 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_ddsx00.ht 1481931039 4653 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_ddsx.hv 251309050 3260 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_ddsx.hvk 731175667 42611 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dlt.cat 777977932 14080 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltc00.ht 525924475 4281 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltc.hv 2450452191 2560 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltc.hvk 871536423 14301 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltm00.ht 847204652 4149 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltm.hv 96308929 2870 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltm.hvk 4245462039 16242 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_dltx00.ht 4190794672 4388 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltx.hv 3170087609 3012 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_dltx.hvk 2155383777 38823 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_lib.cat 206446223 22305 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libc00.ht 2097480125 5299 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libc.hv 1207104668 2340 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libc.hvk 1717223088 22258 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_libm00.ht 4099083963 5235 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libm.hv 2401928869 2302 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libm.hvk 1399137560 23851 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/expert/scsi_libx00.ht 132943620 5597 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libx.hv 346859854 2480 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ expert/scsi_libx.hvk 3338880982 27772 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/fw_update/fc_adaptor.cat 1358790038 7512 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorc00.ht 3729625248 2281 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorc.hv 2386762527 735 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorc.hvk 1413741251 9143 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorm00.ht 4098077669 2702 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorm.hv 3621590501 856 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorm.hvk 3642254744 7414 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorx00.ht 3428794180 2268 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorx.hv 2804097406 708 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/fc_adaptorx.hvk 2131814731 19318 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/fw_update/scsi_mux.cat 1358790038 7512 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxc00.ht 3798214036 2243 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxc.hv 2386762527 735 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxc.hvk 1413741251 9143 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxm00.ht 1638686979 2658 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxm.hv 3621590501 856 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxm.hvk 3642254744 7414 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxx00.ht 1935648242 2232 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxx.hv 2804097406 708 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_muxx.hvk 3683572312 26573 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/fw_update/scsi_disk.cat 1402530239 11909 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/fw_update/scsi_diskc00.ht 177405346 2429 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_diskc.hv 4212174212 1000 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_diskc.hvk 3771905808 13446 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/fw_update/scsi_diskm00.ht 3127681063 2851 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_diskm.hv 1895974861 1113 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_diskm.hvk 1233439533 10168 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/fw_update/scsi_diskx00.ht 1543783067 2007 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_diskx.hv 3338300896 1050 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ fw_update/scsi_diskx.hvk 956898749 1333 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ id/fcp_mux.cat 3517631334 45728 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/info/cpu.cat 4081694544 10766 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/info/fc_adaptor.cat 1911023894 8288 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ info/graphics.cat 3885307532 26667 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/info/scsi_3480.cat 3782875526 26736 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/info/scsi_8mm.cat 4137459652 27491 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/info/scsi_dds.cat 472293095 7793 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ info/scsi_mux.cat 131412894 27474 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/tools/ info/scsi_qic.cat 2487242343 24140 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/verify/disk.cat 1420103255 24855 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ tools/utility/copyutil.cat 3243574160 107283 /usr/sbin/stm/catalog/C/HP-UX_B.10.20/ui/ stm.cat 2273236177 8468 /usr/lib/X11/app-defaults/XStm 2679483208 139264 /usr/sbin/stm/lib/libdiagcm.sl 514537315 172032 /usr/sbin/stm/lib/libdiagms.sl 3538538017 212992 /usr/sbin/stm/lib/libdiagpl.sl 1905719452 147456 /usr/sbin/stm/lib/libdiagud.sl 3104821176 212992 /usr/sbin/stm/lib/libdiagum.sl 251990578 131072 /usr/sbin/stm/lib/libdiagux.sl 1749903149 307200 /usr/sbin/stm/ui/bin/stm 3307273172 57344 /usr/sbin/stm/ui/bin/stm_map_read 3897148068 139264 /usr/sbin/stm/uut/bin/sys/diagmond 3967949400 53248 /usr/sbin/stm/uut/bin/tools/diagnose/atmd 206053312 57344 /usr/sbin/stm/uut/bin/tools/diagnose/psid 1738920692 49152 /usr/sbin/stm/uut/bin/tools/diagnose/ diag_dds 4045327367 36864 /usr/sbin/stm/uut/bin/tools/diagnose/ diag_dlt 3500571406 32768 /usr/sbin/stm/uut/bin/tools/diagnose/ scsi_mux 1993351199 3756032 /usr/sbin/stm/uut/bin/tools/exercise/ graphics 1334849802 32768 /usr/sbin/stm/uut/bin/tools/exercise/lan 1411171293 40960 /usr/sbin/stm/uut/bin/tools/exercise/memory 3892087647 94208 /usr/sbin/stm/uut/bin/tools/expert/scsi_dds 1087697070 73728 /usr/sbin/stm/uut/bin/tools/expert/scsi_dlt 3963218192 102400 /usr/sbin/stm/uut/bin/tools/expert/ scsi_lib 3879425272 53248 /usr/sbin/stm/uut/bin/tools/fw_update/ fc_adaptor 573738074 45056 /usr/sbin/stm/uut/bin/tools/fw_update/ scsi_mux 3493980178 61440 /usr/sbin/stm/uut/bin/tools/fw_update/ scsi_disk 756520782 24576 /usr/sbin/stm/uut/bin/tools/id/fcp_mux 1984145751 28672 /usr/sbin/stm/uut/bin/tools/id/pa_module 4232844077 28672 /usr/sbin/stm/uut/bin/tools/id/graphics_id 3504551615 69632 /usr/sbin/stm/uut/bin/tools/info/cpu 205875520 36864 /usr/sbin/stm/uut/bin/tools/info/fc_adaptor 1165904486 36864 /usr/sbin/stm/uut/bin/tools/info/graphics 2068707458 45056 /usr/sbin/stm/uut/bin/tools/info/scsi_3480 4195995998 53248 /usr/sbin/stm/uut/bin/tools/info/scsi_8mm 3258017570 65536 /usr/sbin/stm/uut/bin/tools/info/scsi_dds 2073876047 32768 /usr/sbin/stm/uut/bin/tools/info/scsi_mux 2813985225 45056 /usr/sbin/stm/uut/bin/tools/info/scsi_qic 2659086695 61440 /usr/sbin/stm/uut/bin/tools/verify/disk 1727228387 28672 /usr/sbin/stm/uut/lib/tlidsector.sl 3677906434 36864 /usr/sbin/stm/uut/lib/tlscsidev.sl 3868397615 12288 /usr/sbin/stm/uut/lib/tlgraphics.sl 1295631254 8364 /var/stm/data/id_mod_xref 2335288994 15624 /var/stm/data/prod_op_xref 3947199920 10444 /var/stm/config/tools/diagnose/psi/psiniodl 1592222557 9616 /var/stm/config/tools/diagnose/psi/psieisdl Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: PHSS_7759 Equivalent Patches: None Patch Package Size: 11330 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHSS_7929 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHSS_7929.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHSS_7929.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHSS_7929. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHSS_7929.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHSS_7929.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: None