Patch Name: PHSS_7585 Patch Description: s700 10.10 Diagnostic cumulative patch #3 Creation Date: 96/07/17 Post Date: 96/08/01 Hardware Platforms - OS Releases: s700: 10.10 Products: Diag-Sys-700 B.10.10 Sup-Tool-Mgr-700 B.10.10 Filesets: Diag-Sys-700.SUP-CORE-700 Diag-Sys-700.SCSI-DISK-700 Diag-Sys-700.DIAG-700-MIN Diag-Sys-700.MEMORY-700 Sup-Tool-Mgr-700.STM-SHLIBS Sup-Tool-Mgr-700.STM-UI-RUN Sup-Tool-Mgr-700.STM-UUT-700-RUN Automatic Reboot?: No Status: General Superseded Critical: No Path Name: /hp-ux_patches/s700/10.X/PHSS_7585 Symptoms: PHSS_7585: 1. a. In 9000/710 systems, SYSMAP and MEMDIAG report the memory size of the 2nd set of 4 SIMMs incorrectly. It reports the 2nd set of SIMMs to be of the same size as the 1st set even though it is different. b. Alita memory, on slot 1 will show in SYSMAP and MEMDIAG as bank 1 instead of bank 0. 2. The diagnostic I/O extension module called Harraymon may no be launched when many I/O events from the Nike disk array are logged quickly. Sometimes processes will be left behind and are not cleaned up until the diagnostic system is restarted. 3. Diagnostic programs terminates with the following error message on systems where root and dump are LVM, but swap is not: *** DIAGNOSTIC MONITOR COULD NOT GRANT ACCESS TO A DEVICE DUE TO FAILURE RETURNED FROM THE DIAGNOSTIC LIBRARY ROUTINE obtain_dev_type(DSSERR 667) *** A SYSTEM DEPENDENT INTERNAL ERROR WAS ENCOUNTERED. (DSSERR 5002) *** AN ERROR WAS RETURNED BY THE DIAGNOSTIC MONITOR IN RESPONSE TO A REQUEST TO OBTAIN ACCESS TO PDEV (0/12). (DSSERR 660) *** THE SPECIFIED DEVICE COULD NOT BE ALLOCATED FOR TESTING (DSSERR 2146) The "help pdev" command with sysdiag also fails with the following error message. *** A SYSTEM DEPENDENT INTERNAL ERROR WAS ENCOUNTERED. (DSSERR 5002) *** UNABLE TO DETERMINE THE IDENTITY OF PDEV (0/12). FURTHER HELP INFORMATION CANNOT BE OBTAINED. (DUIERR 372) 4. Support tools running on SCSI Fast/Wide devices will fail if scsi3 driver Davis code is ported to 10.10 release which only allows even-byte data transfers. (This is still a plan but will possibly materialize. There is no problem if scsi3 driver remains the same). 5. Various fixes in Mesa scsi disk info tool: o a hardware failure does not get a red icon o Some Quantum disks behave strangely (can hang the bus) while tool is trying to obtain error logs. Also deleted support for CDROM and Floppy because of a new srm_disk info tool. (Refer to another patch form for the new srm_disk info tool). 6. No MO and Floppy disks support in Support Tools information module. 7. Current version of cstm in HPUX 10.10 can not read from stdin or write to stdout. So cstm will ignore input piped to it from the shell and the shell can not read any output from cstm. This patch will allow the user to pipe/redirect input to cstm and pipe/redirect output from cstm. 8. Enhancement in Support Tools diagnose scsi_dlt module. 9. a. The error rate computed in the Maximum Coverage test of the diag_dds diagnose tool does not reflect the correct rate for threshold determination. b. Running the diag_dds diagnose tool with more than one iteration and no user queries option fails with "Aborted Command" failure message. c. Enhancement to error decoding algorithm. 10. a. User is prompted each time upon tool start-up to enter the file name for the trace logs output. This make starting up the scsi_dds expert tool a cumbersome process. b. The "Channel Hang" flag in the EEPROM log can be either a bit flag or a byte flag depending on the EEPROM log format on the device. Currently, scsi_dds displays the "Channel Hang" flag as a byte format for both. 11. The "Help" command in the cstm interface for scsi_dds, scsi_dlt and scsi_lib expert tools do not work. 12. This patch contains the STM diagnostic support of the J2804A HP ATM adapter card. This card is delivered with the software product J2805AA. 13. The STM Information Tool (ara_info), Firmware Update Tool (ara_fw), and Expert Tool (ara_ex) for the HP AutoRAID disk array (HPC3586A) will not exist, nor will the STM SCSI Array Identification Module (scsi_arry). During a Rescan Hardware command (System->Rescan HW), STM will not recognize the AutoRAID disk array as a disk array, but will recognize it as separate SCSI disk drives. The number of disk drives will depend on the number of LUNs configured for the AutoRAID array. 14. When user ran the disk verifier on a SCSI (TEAC) floppy drive, the tool would return incomplete status and report that the disk was not supported by the disk verifier. 15. The graphics tools will hang when they are run on a system which is booted under CDE when no-one is logged into the console 16. The graphics exerciser will exit with a status of INCOMPLETE when run on a VISUALIZE-IVX (Hyperdrive with an IMACC) with a video out card. The exerciser will put the following message in the information log: Could not find device name and driver match. Device name=HPA4070B_VI Driver=hphcrx Setting crcs to 0 Setting features to 0 The device name could be HPA4070B_VI or HPA4071B_VI. 17. Downloading firmware files which are wrapped produces an error in SCSIDSK2. 18. - Added SYSMAP/MEMMAP change for printing slot pairs information. - Added IBMDORS-32160 2GB embedded disk - Corrected some Quantum 2/4/9GB product numbers. - Added identification support for Andronicus DDS HPC1539A. 19. When a user runs the information tool and then wants to look at the structure information log, they will get the addressses to the malloced space, not real device data. 20. Bug causes an overwriting of four bytes with unexpected data in the library IPC routine. PHSS_7071: 1. The caller of access_pdc will panic thesystem,if one of the arguments it does not use just happens to be -1. 2. Added support for 2GB, 4GB, 9GB disks: QUANTUM XP32181WD, QUANTUM XP34361S, QUANTUM XP34361WD, QUANTUM XP39100WD, SEAGATE ST19171WD, SEAGATE ST32151N, SEAGATE ST32171WD, SEAGATE ST34371N, SEAGATE ST34371WD, CONNER CFP2117WD, CONNER CFP4217S, CONNER CFP4217WD, CONNER CFP9217WD, FUJITSU M1622S, FUJITSU M2932R, FUJITSU M2934R,FUJITSU M2934S, FUJITSU M2949R 3. Execution of the lobotomize command in SARRAY doesn't issue properinstructions when user intervention is required. 4. Bundled enhancements and upgrades for the HARRAY diagnostic, including: - Scsi verify capability for individual mechs. - Peer SP detection prior to mech firmware downloads. -Erroneous reporting of peer SP presence. - Auto Trespass state reported. - Additional Nike status codes recognized. 5. On an HP9000/755 (hversion 205) and an HP9000/735 (hversion 206), the MEMMAP selection from SYSMAP displaysincorrect information regarding the system memory configuration. 6. Status cmd in DTDUTIL keeps previousproduct number after invalid pdev. Also can result in some instances of an invalid status return from a device. 7. Add's support for HPC1113F mo drive, and HPC1160F autochanger. 8. If a device goes 'hung', the cstm waitcommand stops waiting for the tool running on this device to complete. The 'hung' state does not necessarily mean that anything is wrong other than that the system is busy. When a user disables queries in the diagnose, verify, and exercise options, there is no warning about the dangers that may result. In cstm, after the user answers a query from a non- interactive tool, they do not get re-prompted for whatever they were originally prompted for before the query occurred. A RETURN needed to be hit to get a new prompt,which may not be obvious to the user. Certain interactive tools can invoke a data corruption in cstm. Garbled messages or a cstm crash can occur. There is no check to verify that the UI is compatible with the UUT. New UIs are compatible with old UUTs, but the converse is not true. 9. MSTM Disabled keys are blank Keys are updated to first level when map is updated Selecting go-to-link key without a link selected can cause a segmentation violation Scrolling down on a dialog which is larger than 1 page can cause the dialog to disappear Platform ESTALE on read of uut_status causes UUT disconnect when running on NFS diskless clients Corrupt uut_status after system crash causes diagmond to not come up Setting wait_for_done flag on programmatic interface routine to start a tool did not work Default timeout values for staring tools and tools going hung were too small SCSI Floppy and graphics devices were unsupported Tools Graphics devices were unrecognized 10. Mesa disk download tool will not work for disks on S800 systems where download file size is over 262195 bytes. The fix is to allow up to 262411 bytes of transfer. 11. As a result of this problem the Memory exerciser will appear to be hung and does not appear to complete execution. 12. As a result of this problem the CPU exerciser will appear to be hung and does not appear to complete execution. 13. For disks with exactly 1G, 2G or nG size, the disk exercise test will terminate with error when the write reached the end of the disk. 14. The graphics exerciser would exit with a status of INCOMPLETE, giving no message indicating why it exited. When running on HCRX and VISUALIZE-48 graphics boards, the graphics exerciser would intermittently get a 1207 RAMDAC id error. After running for a long time (more than 18 hours), the graphics exerciser would get a segmentation violation. 15. Added support for Alita Memory. 16. No MESA SCSI DLT Tape Diagnose Tool support. 17. No MESA SCSI DLT Tape Expert Tool support. 18. No MESA SCSI Tape F/W Update Tool support. 19. Some tools which uses the tlscsidev IO may incorrectly get a timoeout failure from the DAR. 20. During fault isolation, an incorrect chip id is returned by MEMLOGP/LOGTOOL and MEMDIAG for Alita and 2x memory boards. 21. For Mesa tape tools, if the device returns an unsuccessful status yet returns data, the tools do not get this data back. 22. No MESA SCSI Library Expert tool support. 23. No MESA SCSI Library Firmware Update Tool support. 24. The Support Tool Manager crashes when local environment variables LANG, LC_MESSAGES or LC_ALL are set to something other than "C". 25. Added support for two disks: Seagate ST32171N, Seagate ST19171N. 26. SYSMAP/CPUMAP and SYSMAP/MODMAP will show incorrect information if an EISA card is installed in the system. 27. Added support for cio_card and hpib_dev identify tool in Mesa s700. 28. CPU Exerciser exiting with warning on multi-cpu system on Dart28. 29. No MESA SCSI DDS Expert tool support. 30. No MESA SCSI DDS Tape Diagnose Tool support. 31. No MESA ATM Card Diagnose Tool support. PHSS_6796: 1. QUANTUMFIREBALL1050S, SEAGATEST31051N, and SEAGATEST51080N 1 GB disks are not supported at the time of release. Defect Description: PHSS_7585: 1. a. Possibly a typo error in xiomem.c b. Incorrect logical bank mapping in xiomemhk.c 2. The diagnostic monitor sets limits for the number of concurrent I/O logging extension modules launch and a separate limit for the number launched per address. These limits were too low for the Nike drive. The limits have been increases to 20 max concurrent I/O logging extension modules and a max of 10 for each address. 3. The diagnostic library routine obtain_dev_type was not taking into account the output from lvlnboot. The code was expecting "Swap: ". On systems with the output similar to #lvlnboot -v lvlnboot: Volume group not activated. Cannot display volume group "/dev/db01". Boot Definitions for Volume Group /dev/vg00: Physical Volumes belonging in Root Volume Group: /dev/dsk/c1t5d0 (0/52.5.0) /dev/dsk/c1t6d0 (0/52.6.0) -- Boot Disk Root: lvol1 on: /dev/dsk/c1t6d0 No Swap Logical Volume configured Dump: lvol2 on: /dev/dsk/c1t6d0, 0 Dump: lvol3 on: /dev/dsk/c1t6d0, 1 the "Swap:" is not present. 4. Potential change in the scsi3 driver for 10.10 release. 5. Incorrect code handling the above problems. 6. The products were not supported product at the time of release. 7. This is caused because cstm did not support reading from stdin or writing to stdout in the HPUX 10.10 release. It is supported in the HPUX 10.20 release. The user will see this problem when expecting to pipe/redirect input to cstm or pipe/redirect output from cstm. 8. Enhancement to the error decoding algorithm in the module. 9. a. Formula used in calculating the error rate is incorrect. b. When the "no user queries allowed" option is set and the diagnose tool is set to run more than one iteration, the tool will attempt to run tests which requires media not be present even when media is loaded causing an "Aborted command" error. c. Enhancement to the error decoding algorithm in the module. 10. a. Enhancement to trace log dump operation. Initial dump of trace logs will always write to default temporary file. User will not be prompted for the output file name with the "initial" dump of the trace logs upon start-up. User will still be prompted for the output file name when the trace logs dump is executed on demand by the user. b. Fix "Channel Hang" EEPROM log message display format to correctly display either a bit or byte setting depending on the EEPROM log format on the device. 11. Entering "Help" in the SCSI tape and library expert tools in cstm will give error message. The SCSI tape and library expert tools used "GeneralHelp" instead of "Help" as the help command. Tools fixed to use "Help" as the help command. 12. The products were not supported product at the time of release. 13. The products were not supported product at the time of release. 14. The cause of the problem was that the driver name "sflop" was not included in the verifier's checklist. 15. The problem here is that the tools and the mapping routines are using an ioctl GCDESCRIBE which is hanging when the system is booted CDE and no-one is logged on the console. 16. The products were not supported product at the time of release. 17. Wrapped firmware files were not supported. 18. This change is to support new memory. 19. The declaration of char pointers for the info_data data structure caused the problem. In this case, fixed size char array should be used. 20. Two kernel routines, msgsnd and msgrcv, are sent the size of a data structure (msgbuf type), along with the data structure. These routines then write/read "size" number of bytes into the data structure. The problem was that the routines expect the "size" to be four bytes less than the size of a msgbuf type structure. The "size" needs to be the size of the data portion of the structure, not the entire structure. PHSS_7071: 1. This problem is random, due to the root cause being uninitialize data space. 2. These changes are all to support new hardware. 3. The program was missing the code and instruction message for this command. 4. Enhancements in HARRAY. 5. In situations where obtaining access to a device fails, the product string was not being cleared. The result is the display of incorrect information when executing the "status" command. 6. In situations where obtaining access to a device fails, the product string was not being cleared. The result is the display of incorrect information when executing the "status" command. 7. The products were not supported product at the time of release. 8. The 'wait for hung' problem is due to an omission of 'hung' from the list of tool states which are waited for. This is only a problem when the 'wait' command is used in cstm and the system is busy. The interactive tool corruption problem can happen only when the cstm interface is used. The only tool which can invoke this problem is the disk firmware update tool. Due to added features in future versions of stm, an old UI may not work correctly with new versions of the UUT. Using an old UI with a UUT is not supported, but no warning is given. 9. Defects were introduced during development. 10. In Mesa, 255 bytes are being allocated for possible sense bytes. In Sherlock, only 40 bytes are allocated for sense bytes. If transfers are over 262195, allow up to 262411 which means that sensy bytes allocaton will go down to up to 40. 11. This problem occurs when there is no floating point coprocessor. 12. This problem occurs when there is no floating point coprocessor. 13. The cause of the problem is incorrect handling of the boundary condition. The symptom will only exhibit on disks which size is integral of 64K. 14. The graphics exerciser has to get the graphics device path from the X0screens file (found in /etc/X11). When there were entries in the X0screens file other than the 'Screen ' entry, the graphics exerciser would get confused when parsing the file, and get a bad device path. It would attempt to use the bad device path, and eventually the exerciser would make an X call with bad parameters. The X function would cause the process to exit with a status that corresponded with the MESA status of INCOMPLETE. In one section of the test, the graphics exerciser would attempt to read a value from the hardware right after another graphics process had performed several graphics operations. Because the graphics device was busy from the previous operations, the read timed out, and the graphics device returned incorrect data. There was a memory leak in a library. 15. To support new Alita Memory. 16. Initial support for MESA SCSI DLT Tape Diagnose Tool. 17. Initial support for MESA SCSI DLT Tape Expert Tool. 18. Initial support for MESA SCSI Tape F/W Update Tool. 19. The timeout value to be passed to the driver has to be in milliseconds. The DAR has to do the conversion by multipying the value passed by the tools (in seconds) by 1000. However, the code only multiplies by 100. 20. Incorrect algorithm in current xiomemhk.c code for Alita and 2x memory. 21. The DAR does not return information that data was processed by the device if sense key is returned. 22. Initial support for MESA SCSI Library expert tool. 23. Initial support for MESA SCSI Library Firmware Update Tool. 24. When any of the environment variables LANG, LC_MESSAGES, or LC_ALL are set, and they are set to something other than "C", the Support Tool Manager (stm, xstm, mstm, and cstm) abort or fail to fully initialize and do not display a map.) 25. The new disks were not supported product at the time 10.10 was released. 26. EISA cards were being treated as PA-architected modules and they are not. 27. The two identify tools were missed in the release. 28. CPU exerciser was failing to close file descriptors. 29. Initial support for MESA SCSI DDS expert tool. 30. Initial support for MESA SCSI DDS diagnose tool. 31. Initial support for MESA ATM Card Diagnose Tool. PHSS_6796: 1. QUANTUMFIREBALL1050S, SEAGATEST31051N, and SEAGATEST51080N 1 GB disks were not supported products at the time 10.10 was released. SR: 4701317370 4701312967 4701316372 4701320796 1653167494 4701327643 4701327346 5003321604 4701328294 4701328989 1653172536 4701327809 4701330084 4701330100 4701327346 Patch Files: /usr/lib/libdiag.sl /usr/sbin/diag/DIAGLIST /usr/sbin/diag/DUIDIR /usr/sbin/diag/IODEVACC /usr/sbin/diag/CMEML000 /usr/sbin/diag/CSERV000 /usr/sbin/diag/C0001000 /usr/sbin/diag/C0003000 /usr/sbin/diag/C0005000 /usr/sbin/diag/C0006000 /usr/sbin/diag/C0008000 /usr/sbin/diag/C0012000 /usr/sbin/diag/C0017000 /usr/sbin/diag/DASSDIAG /usr/sbin/diag/DUI /usr/sbin/diag/HARRAY /usr/sbin/diag/LAYOUTF /usr/sbin/diag/LAYMSG /usr/sbin/diag/LOGTOOL /usr/sbin/diag/MEMDIAG /usr/sbin/diag/MEMLOGP /usr/sbin/diag/SARRAY /usr/sbin/diag/SCSIDDS /usr/sbin/diag/SCSIDSK2 /usr/sbin/diag/SYSMAP /usr/sbin/suplicen /usr/sbin/stm/catalog/C/HP-UX_B.10.10/sys/diagmond.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/syslib/libdiagms.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tool_lib/tlscsidev.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tool_lib/ tlgraphics.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/diagnose/ diag_dds.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/diagnose/ diag_dlt.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/diagnose/ atmd.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/exercise/cpu.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_ex.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dds.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dlt.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_lib.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fw.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_lib.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libc00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libc.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libc.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libm00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libm.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libm.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libx00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libx.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libx.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tape.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapec00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapec.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapec.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapem00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapem.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapem.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapex00.ht /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapex.hv /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapex.hvk /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/scsi_dev.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/scsi_arry.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/hpib_dev.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/cio_card.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ ara_info.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ graphics.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_3480.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_8mm.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_dds.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_disk.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_qic.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ srm_disk.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/verify/disk.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/libdiagum.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/libdiagcm.cat /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/stm.cat /usr/lib/X11/app-defaults/XStm /usr/sbin/stm/lib/libdiagcm.sl /usr/sbin/stm/lib/libdiagms.sl /usr/sbin/stm/lib/libdiagpl.sl /usr/sbin/stm/lib/libdiagud.sl /usr/sbin/stm/lib/libdiagum.sl /usr/sbin/stm/lib/libuicom.sl /usr/sbin/stm/ui/bin/stm /usr/sbin/stm/uut/bin/sys/diagmond /usr/sbin/stm/uut/bin/tools/diagnose/diag_dds /usr/sbin/stm/uut/bin/tools/diagnose/diag_dlt /usr/sbin/stm/uut/bin/tools/diagnose/atmd /usr/sbin/stm/uut/bin/tools/exercise/devinfo.3d /usr/sbin/stm/uut/bin/tools/exercise/cpu /usr/sbin/stm/uut/bin/tools/exercise/disk /usr/sbin/stm/uut/bin/tools/exercise/memory /usr/sbin/stm/uut/bin/tools/expert/ara_ex /usr/sbin/stm/uut/bin/tools/expert/scsi_dds /usr/sbin/stm/uut/bin/tools/expert/scsi_dlt /usr/sbin/stm/uut/bin/tools/expert/scsi_lib /usr/sbin/stm/uut/bin/tools/fw_update/ara_fw /usr/sbin/stm/uut/bin/tools/fw_update/scsi_lib /usr/sbin/stm/uut/bin/tools/fw_update/scsi_tape /usr/sbin/stm/uut/bin/tools/id/graphics_id /usr/sbin/stm/uut/bin/tools/id/scsi_dev /usr/sbin/stm/uut/bin/tools/id/scsi_arry /usr/sbin/stm/uut/bin/tools/id/pa_module /usr/sbin/stm/uut/bin/tools/id/hpib_dev /usr/sbin/stm/uut/bin/tools/id/cio_card /usr/sbin/stm/uut/bin/tools/info/ara_info /usr/sbin/stm/uut/bin/tools/info/graphics /usr/sbin/stm/uut/bin/tools/info/scsi_3480 /usr/sbin/stm/uut/bin/tools/info/scsi_8mm /usr/sbin/stm/uut/bin/tools/info/scsi_dds /usr/sbin/stm/uut/bin/tools/info/scsi_disk /usr/sbin/stm/uut/bin/tools/info/scsi_qic /usr/sbin/stm/uut/bin/tools/info/srm_disk /usr/sbin/stm/uut/bin/tools/verify/disk /usr/sbin/stm/ui/icons/atm_c.50.p /usr/sbin/stm/uut/lib/tlscsidev.sl /usr/sbin/stm/uut/lib/tlgraphics.sl /var/stm/config/sys/diagmond.cfg /var/stm/data/id_mod_xref /var/stm/data/prod_op_xref what(1) Output: /usr/lib/libdiag.sl: XIOANY,$Date: 95/04/19 15:51:19 $, $Revision: 1.27 $ OIOCS80,$Date: 94/07/06 13:20:06 $, $Revision: 1.12 $ XIOFLEX,$Date: 93/04/13 10:09:15 $, $Revision: 1.5 $ OEISAHPIB,$Date: 94/04/14 14:25:33 $, $Revision: 1.1 2 $ OIOPSI,$Date: 95/10/16 10:01:23 $, $Revision: 1.4 $ OIOFDDI,$Date: 94/05/20 12:20:20 $, $Revision: 1.10 $ OSCSIDA,$Date: 95/03/14 14:54:10 $, $Revision: 1.33 $ OSCSIMC,$Date: 95/10/31 18:48:29 $, $Revision: 1.18 $ OSCSISA,$Date: 94/12/15 13:50:28 $, $Revision: 1.30 $ OLN5EISA,$Date: 93/04/12 17:00:34 $, $Revision: 1.6 $ xiolan.p,$Revision: 1.18 $ errno_func.c,$Revision: 1.2 $ pioctl.c,$Revision: 1.3 $ setsign1.h,$Revision: 1.2 $ TIOMEM,$Date $, $Revision: 1.1.1.30 $ XIOMEM,$Date $, $Revision: 1.78.1.1 $ TIOMEM,$Date $, $Revision: 1.1.1.30 $ xiomempd.c,$Revision: 1.9 $ TIOMEM,$Date $, $Revision: 1.1.1.30 $ xiomemhk.c,$Revision: 1.28 $ XIOTAPE,$Date: 93/04/12 16:57:41 $, $Revision: 1.4 $ oaccpdc.c,$Revision: 1.10 $ OIOUTIL,$Date: 94/02/01 15:03:18 $, $Revision: 1.14 $ xiobuff.c,$Revision: 1.2 $ xdisktst.c,$Revision: 1.2 $ xdgshut.c,$Revision: 1.2 $ xlogserv.c,$Revision: 1.2 $ xipcproc.c,$Revision: 1.11 $ oduiutlc.c,$Revision: 1.7 $ oduimsg.c,$Revision: 1.5 $ oduilic.c,$Revision: 1.6 $ oduiinst.c,$Revision: 1.3 $ xfileps.c,$Revision: 1.11 $ ocbind.c,$Revision: 1.8 $ oduimdst.c,$Revision: 1.4 $ oduihc.c,$Revision: 1.3 $ oduiintc.c,$Revision: 1.16 $ oduiextc.c,$Revision: 1.2 $ syscall.c,$Revision: 1.6 $ oduisig.c,$Revision: 1.6 $ xpsutil.c,$Revision: 1.8 $ xdevacc.c,$Revision: 1.177 $ xdevtype.c,$Revision: 1.23 $ xprodnum.c,$Revision: 1.55 $ xdsmlog.c,$Revision: 1.9 $ oduici.c,$Revision: 1.4 $ xmonserv.c,$Revision: 1.45 $ odecstat.p,$Revision: 1.3 $ oinforeq.p,$Revision: 1.2 $ oprogenv.p,$Revision: 1.2 $ odplsrv.p,$Revision: 1.3 $ omlpacc.p,$Revision: 1.5 $ oiopt.p,$Revision: 1.5 $ odirmgt.p,$Revision: 1.2 $ obits.p,$Revision: 1.2 $ osecmgt.p,$Revision: 1.3 $ odiagsa.p,$Revision: 1.3 $ omonserv.p,$Revision: 1.10 $ odgtest.p,$Revision: 1.4 $ ododata.p,$Revision: 1.5 $ ophserv.p,$Revision: 1.3 $ opbind.p,$Revision: 1.3 $ oduiutil.p,$Revision: 1.3 $ oduiexit.p,$Revision: 1.7 $ ostorlog.p,$Revision: 1.12 $ oscdisk.p,$Revision: 1.4 $ odevacc.p,$Revision: 1.20 $ opinit.p,$Revision: 1.8 $ oscanall.p,$Revision: 1.2 $ ostrnum.p,$Revision: 1.3 $ oerrmgt.p,$Revision: 1.4 $ oduilang.p,$Revision: 1.3 $ oduiprnt.p,$Revision: 1.6 $ oduiinit.p,$Revision: 1.8 $ oduiipc.p,$Revision: 1.6 $ oduiintr.p,$Revision: 1.4 $ odatetim.p,$Revision: 1.3 $ oiolgext.p,$Revision: 1.1 $ /usr/sbin/diag/DIAGLIST: None /usr/sbin/diag/DUIDIR: None /usr/sbin/diag/IODEVACC: IODEVACC,$Revision: 1.1.1.83 $'$ /usr/sbin/diag/CMEML000: None /usr/sbin/diag/CSERV000: None /usr/sbin/diag/C0001000: None /usr/sbin/diag/C0003000: None /usr/sbin/diag/C0005000: None /usr/sbin/diag/C0006000: ssarray: (A.02.08), Tue May 2 12:29:31 MDT 1995 dea nc'$ /usr/sbin/diag/C0008000: None /usr/sbin/diag/C0012000: None /usr/sbin/diag/C0017000: sharray: (A.01.15)'$ /usr/sbin/diag/DASSDIAG: DASSDIAG,06/20/95,A.02.09 OSCSIDA,$Date: 95/03/14 14:54:10 $, $Revision: 1.33 $ OSCSIMC,$Date: 95/10/31 18:48:29 $, $Revision: 1.18 $ xiobuff.c,$Revision: 1.2 $ xfileps.c,$Revision: 1.11 $ ocbind.c,$Revision: 1.8 $ odecstat.p,$Revision: 1.3 $ oiopt.p,$Revision: 1.5 $ osecmgt.p,$Revision: 1.3 $ odevacc.p,$Revision: 1.20 $ opinit.p,$Revision: 1.8 $ oscanall.p,$Revision: 1.2 $ XIOANY,$Date: 95/04/19 15:51:19 $, $Revision: 1.27 $ xipcproc.c,$Revision: 1.7 $ syscall.c,$Revision: 1.6 $ xpsutil.c,$Revision: 1.8 $ xdevacc.c,$Revision: 1.175 $ xdevtype.c,$Revision: 1.21 $ xprodnum.c,$Revision: 1.54 $ xmonserv.c,$Revision: 1.44 $ oinforeq.p,$Revision: 1.2 $ omlpacc.p,$Revision: 1.5 $ odirmgt.p,$Revision: 1.2 $ odiagsa.p,$Revision: 1.3 $ omonserv.p,$Revision: 1.9 $ odgtest.p,$Revision: 1.4 $ ododata.p,$Revision: 1.5 $ ophserv.p,$Revision: 1.3 $ opbind.p,$Revision: 1.3 $ ostrnum.p,$Revision: 1.3 $ oerrmgt.p,$Revision: 1.4 $ oduiprnt.p,$Revision: 1.6 $ odatetim.p,$Revision: 1.3 $ OIOCS80,$Date: 94/07/06 13:20:06 $, $Revision: 1.12 $ OIOPSI,$Date: 95/10/16 10:01:23 $, $Revision: 1.4 $ OIOFDDI,$Date: 94/05/20 12:20:20 $, $Revision: 1.10 $ OSCSISA,$Date: 94/12/15 13:50:28 $, $Revision: 1.30 $ OLN5EISA,$Date: 93/04/12 17:00:34 $, $Revision: 1.6 $ xiolan.p,$Revision: 1.18 $ oaccpdc.c,$Revision: 1.10 $ xlogserv.c,$Revision: 1.2 $ oduimsg.c,$Revision: 1.5 $ oduiintc.c,$Revision: 1.16 $ obits.p,$Revision: 1.2 $ ostorlog.p,$Revision: 1.12 $ oduiinit.p,$Revision: 1.8 $ XIOFLEX,$Date: 93/04/13 10:09:15 $, $Revision: 1.5 $ errno_func.c,$Revision: 1.2 $ pioctl.c,$Revision: 1.3 $ setsign1.h,$Revision: 1.2 $ oduisig.c,$Revision: 1.6 $ oscdisk.p,$Revision: 1.4 $ oduiintr.p,$Revision: 1.4 $ /usr/sbin/diag/DUI: DUI(xduiwait),$Revision: 1.3 $ DUI(xduiutil),$Revision: 1.3 $ DUI(xduiuse),$Revision: 1.5 $ DUI(xduiunlk),$Revision: 1.3 $ DUI(xduisyn),$Revision: 1.5 $ DUI(xduisusp),$Revision: 1.3 $ DUI(xduishac),$Revision: 1.3 $ DUI(xduisetv),$Revision: 1.3 $ DUI(xduisect),$Revision: 1.3 $ DUI(xduirun),$Revision: 1.12 $ DUI(xduirsiz),$Revision: 1.3 $ DUI(xduirsav),$Revision: 1.3 $ DUI(xduiresm),$Revision: 1.3 $ DUI(xduirdld),$Revision: 1.3 $ DUI(xduiprog),$Revision: 1.3 $ DUI(xduiprnt),$Revision: 1.4 $ DUI(xduiprct),$Revision: 1.3 $ DUI(xduiof),$Revision: 1.7 $ DUI(xduimdst),$Revision: 1.3 $ DUI(xduilsrd),$Revision: 1.3 $ DUI(xduiipc),$Revision: 1.6 $ DUI(xduiintr),$Revision: 1.5 $ DUI(xduiinit),$Revision: 1.9 $ DUI(xduiif),$Revision: 1.3 $ DUI(xduihelp),$Revision: 1.4 $ DUI(xduihc),$Revision: 1.3 $ DUI(xduiexit),$Revision: 1.3 $ DUI(xduierr),$Revision: 1.4 $ DUI(xduidsys),$Revision: 1.3 $ DUI(xduidord),$Revision: 1.3 $ DUI(xduict),$Revision: 1.3 $ DUI(xduicstk),$Revision: 1.3 $ DUI(xduicmds),$Revision: 1.3 $ DUI(xduici),$Revision: 1.4 $ DUI(xduiabrt),$Revision: 1.3 $ DUI,$Revision: 1.13 $ DUI(oduinst),$Revision: 1.18 $ GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_LICENSE.C, $Revision: 1.24 $ DECODE_STABLE_STORAGE.C, $Revision: 1.5 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ IS_RCO_LICENSE_INSTALLED.C, $Revision: 1.6 $ LIC_GET_DATE.C, $Revision: 1.5 $ READ_FROM_SS.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ GET_HVERSION.C, $Revision: 1.12 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ GET_SW_ID.C, $Revision: 1.12 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ /usr/sbin/diag/HARRAY: xharray.p: (A.01.15) /usr/sbin/diag/LAYOUTF: None /usr/sbin/diag/LAYMSG: None /usr/sbin/diag/LOGTOOL: LOGTOOL(ologcm),04/05/95,A.03.04 LOGTOOL(ologio),03/03/95,A.03.04 LOGTOOL(ologipc),03/03/95,A.03.04 HPUX only LOGTOOL(ologlay),04/05/95,A.03.04 LOGTOOL(ologsyn),03/03/95,A.03.04 LOGTOOL(ologtab),03/03/95,A.03.04 LOGTOOL(ologtool),03/03/95,A.03.04 LOGTOOL(ologtran),04/05/95,A.03.04 LOGTOOL(ologutil),03/03/95,A.03.04 xlogserv.c,$Revision: 1.2 $ xfileps.c,$Revision: 1.11 $ xpsutil.c,$Revision: 1.8 $ xdevacc.c,$Revision: 1.177 $ odecstat.p,$Revision: 1.3 $ oprogenv.p,$Revision: 1.2 $ odplsrv.p,$Revision: 1.3 $ omlpacc.p,$Revision: 1.5 $ odgtest.p,$Revision: 1.4 $ ododata.p,$Revision: 1.5 $ opinit.p,$Revision: 1.8 $ oscanall.p,$Revision: 1.2 $ ostrnum.p,$Revision: 1.3 $ oerrmgt.p,$Revision: 1.4 $ odatetim.p,$Revision: 1.3 $ oaccpdc.c,$Revision: 1.10 $ xiobuff.c,$Revision: 1.2 $ xipcproc.c,$Revision: 1.11 $ ocbind.c,$Revision: 1.8 $ syscall.c,$Revision: 1.6 $ xprodnum.c,$Revision: 1.55 $ xmonserv.c,$Revision: 1.45 $ odirmgt.p,$Revision: 1.2 $ obits.p,$Revision: 1.2 $ omonserv.p,$Revision: 1.10 $ ophserv.p,$Revision: 1.3 $ odevacc.p,$Revision: 1.20 $ xdevtype.c,$Revision: 1.23 $ oinforeq.p,$Revision: 1.2 $ odiagsa.p,$Revision: 1.3 $ opbind.p,$Revision: 1.3 $ ostorlog.p,$Revision: 1.12 $ oduiprnt.p,$Revision: 1.6 $ OIOCS80,$Date: 94/07/06 13:20:06 $, $Revision: 1.12 $ XIOFLEX,$Date: 93/04/13 10:09:15 $, $Revision: 1.5 $ OSCSIDA,$Date: 95/03/14 14:54:10 $, $Revision: 1.33 $ oduimsg.c,$Revision: 1.5 $ oduiintc.c,$Revision: 1.16 $ oscdisk.p,$Revision: 1.4 $ oduiinit.p,$Revision: 1.8 $ oduisig.c,$Revision: 1.6 $ oduiintr.p,$Revision: 1.4 $ /usr/sbin/diag/MEMDIAG: @(#)OMADERR,$Revision: 1.19 $ @(#)OMADGET,07/24/92,A.02.08 @(#)OMADINIT,$Revision: 1.24 $ @(#)OMADMAIN,$Revision: 1.21 $ @(#)OMADPAGE,07/06/92,A.02.12 @(#)OMADPRNT,$Revision: 1.32 $ @(#)OMADS1,$Revision: 1.10 $ @(#)OMADS2,$Revision: 1.12 $ @(#)OMADS3,$Revision: 1.12 $ @(#)OMADS4,$Revision: 1.9 $ @(#)OMADS5,$Revision: 1.10 $ @(#)OMADS6,08/14/91,A.02.08 @(#)OMADS7,08/14/91,A.02.08 @(#)OMADS8,$Revision: 1.26 $ @(#)OMADS9,$Revision: 1.12 $ @(#)OMADTEST,$Revision: 1.17 $ @(#)OMADSUBS,$Revision: 1.9 $ /usr/sbin/diag/MEMLOGP: @(#)MEMLOGP,$Revision: 1.45 $ A.02.24 /usr/sbin/diag/SARRAY: xsarray.p: (A.02.08), Tue May 2 12:29:31 MDT 1995 d eanc /usr/sbin/diag/SCSIDDS: SCSIDDS, 5/10/96,A.02.33 /usr/sbin/diag/SCSIDSK2: SCSIDSK2,1/5/96,A.03.10 /usr/sbin/diag/SYSMAP: @(#)OSYSMAP,$Revision: 1.53.1.2 $ /usr/sbin/suplicen: CLOSE_MSG_CATALOG.C,$Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INFORM_USER_OF_SUCCESS.C, $Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ OPEN_MSG_CATALOG.C, $Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ QUERY_USER.C, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SUPLICEN,$Revision: 1.27 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_HVERSION.C, $Revision: 1.12 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ LIC_GET_DATE.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_LIC_AR.H, $Revision: 1.31 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 CONVERT_DATE, $Revision: 1.6 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ /usr/sbin/stm/catalog/C/HP-UX_B.10.10/sys/diagmond.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/syslib/libdiagms.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tool_lib/ tlscsidev.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tool_lib/ tlgraphics.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/diagnose/ diag_dds.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/diagnose/ diag_dlt.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/diagnose/ atmd.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/exercise/ cpu.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_ex.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ ara_exx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dds.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_ddsx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dlt.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_dltx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_lib.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/expert/ scsi_libx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fw.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ ara_fwx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_lib.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libc00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libc.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libc.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libm00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libm.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libm.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libx00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libx.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_libx.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tape.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapec00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapec.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapec.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapem00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapem.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapem.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapex00.ht: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapex.hv: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/fw_update/ scsi_tapex.hvk: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/scsi_dev.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/ scsi_arry.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/hpib_dev.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/id/cio_card.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ ara_info.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ graphics.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_3480.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_8mm.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_dds.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_disk.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ scsi_qic.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/info/ srm_disk.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/verify/disk.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/libdiagum.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/libdiagcm.cat: None /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/stm.cat: None /usr/lib/X11/app-defaults/XStm: None /usr/sbin/stm/lib/libdiagcm.sl: cm_append_buff.c, $Revision: 1.7 $ isinteger.c, $Revision: 1.3 $ isquote.c, $Revision: 1.3 $ cm_build_cmd_list.c, $Revision: 1.9 $ cm_build_exit_response_list.c, $Revision: 1.5 $ cm_build_map_keyword_list.c, $Revision: 1.6 $ cm_build_map_title1.c, $Revision: 1.9 $ cm_build_map_title2.c, $Revision: 1.10 $ cm_build_map_title3.c, $Revision: 1.9 $ cm_build_map_title_seperator.c, $Revision: 1.8 $ cm_build_rb_response_list.c, $Revision: 1.7 $ cm_cat_map_info.c, $Revision: 1.7 $ cm_clear_local_entry_list.c, $Revision: 1.5 $ cm_close_target.c, $Revision: 1.8 $ cm_convert_path_to_dev.c, $Revision: 1.4 $ cm_destroy_dialog_box.c, $Revision: 1.6 $ cm_display_rb_entry.c, $Revision: 1.6 $ cm_escape_to_os.c, $Revision: 1.6 $ cm_get_active_tool.c, $Revision: 1.4 $ cm_get_input.c, $Revision: 1.20 $ cm_get_keyword.c, $Revision: 1.6 $ cm_get_last_op_status.c, $Revision: 1.11 $ cm_num_sel_in_list.c, $Revision: 1.3 $ cm_poll_for_interrupt.c, $Revision: 1.11 $ cm_process_float_widget.c, $Revision: 1.10 $ cm_process_keyword_input.c, $Revision: 1.15 $ cm_process_list_widget.c, $Revision: 1.5 $ cm_process_list_widget_line.c, $Revision: 1.17 $ cm_prompt_for_input.c, $Revision: 1.7 $ cm_read_data.c, $Revision: 1.5 $ cm_read_line.c, $Revision: 1.11 $ cm_select_widget.c, $Revision: 1.3 $ cm_set_radio_button.c, $Revision: 1.6 $ cm_show_error_position.c, $Revision: 1.9 $ cm_show_progress.c, $Revision: 1.7 $ cm_update_buttons.c, $Revision: 1.5 $ cm_update_double_widget.c, $Revision: 1.11 $ cm_update_local_entry_list.c, $Revision: 1.6 $ cm_update_menu.c, $Revision: 1.4 $ cm_write_cat_msg.c, $Revision: 1.3 $ cm_write_data.c, $Revision: 1.5 $ cm_write_error_caret.c, $Revision: 1.5 $ delete_str_list.c, $Revision: 1.5 $ get_button.c, $Revision: 1.3 $ get_keyword_that_expects_response.c, $Revision: 1.5 $ inc_error_ptr_offset.c, $Revision: 1.2 $ install_unique_char_count.c, $Revision: 1.7 $ lookup_cmd.c, $Revision: 1.6 $ rm_garbage_chars.c, $Revision: 1.6 $ rm_spaces.c, $Revision: 1.3 $ str_to_lower.c, $Revision: 1.4 $ strcmp_ignorecase.c, $Revision: 1.5 $ strncmp_ignorecase.c, $Revision: 1.4 $ cm_build_bool_response_list.c, $Revision: 1.7 $ cm_build_button_prompt.c, $Revision: 1.9 $ cm_build_keyword_list.c, $Revision: 1.8 $ cm_build_list_widget_cmd_list.c, $Revision: 1.12 $ cm_build_list_widget_valid_response_list.c, $Revisio n: 1.8 $ cm_build_map_entry.c, $Revision: 1.14 $ cm_convert_str_to_double.c, $Revision: 1.8 $ cm_convert_str_to_long.c, $Revision: 1.6 $ cm_convert_time_to_str.c, $Revision: 1.9 $ cm_create_dialog_box.c, $Revision: 1.18 $ cm_display_list.c, $Revision: 1.11 $ cm_display_map.c, $Revision: 1.11 $ cm_display_map_title.c, $Revision: 1.9 $ cm_display_radio_buttons_and_prompt.c, $Revision: 1. 8 $ cm_echo_input.c, $Revision: 1.8 $ cm_fdopen.c, $Revision: 1.8 $ cm_find_button.c, $Revision: 1.5 $ cm_get_cat_msg.c, $Revision: 1.9 $ cm_get_ctrl_term_name.c, $Revision: 1.8 $ cm_get_dev_num_for_path.c, $Revision: 1.6 $ cm_get_forward_progress.c, $Revision: 1.12 $ cm_get_list_num_for_entry.c, $Revision: 1.8 $ cm_get_menu_cmd_num.c, $Revision: 1.18 $ cm_get_range_of_entries.c, $Revision: 1.11 $ cm_init_local_entry_list.c, $Revision: 1.3 $ cm_insert_butns_and_unique_chr_cnt.c, $Revision: 1.6 $ cm_insert_cat_msg_in_list.c, $Revision: 1.6 $ cm_open_target.c, $Revision: 1.17.1.1 $ cm_parse_keyword.c, $Revision: 1.15 $ cm_parse_keyword_response.c, $Revision: 1.10 $ cm_peep_token.c, $Revision: 1.2 $ cm_point_to_end_of_response.c, $Revision: 1.14 $ cm_prep_input_line.c, $Revision: 1.8 $ cm_process_bool_widget.c, $Revision: 1.11 $ cm_process_cmd.c, $Revision: 1.11 $ cm_process_double_widget.c, $Revision: 1.11 $ cm_process_file_spec.c, $Revision: 1.12 $ cm_process_int_widget.c, $Revision: 1.10 $ cm_process_keywords.c, $Revision: 1.10 $ cm_process_list_widget_interactively.c, $Revision: 1 .10 $ cm_process_radio_button_widget.c, $Revision: 1.17 $ cm_process_string_widget.c, $Revision: 1.13 $ cm_process_widgets.c, $Revision: 1.18 $ cm_prompt_for_exit.c, $Revision: 1.18 $ pull_msg_from_ll.c, $Revision: 1.5 $ cm_push_a_button_any_button.c, $Revision: 1.20 $ cm_push_ok.c, $Revision: 1.5 $ cm_read_data_fp.c, $Revision: 1.6 $ cm_read_device.c, $Revision: 1.14 $ cm_record_cmd.c, $Revision: 1.8 $ cm_record_output.c, $Revision: 1.6 $ cm_select_dialog_box.c, $Revision: 1.11 $ cm_update_bool_widget.c, $Revision: 1.13 $ cm_update_dialog_box.c, $Revision: 1.12 $ cm_update_file_spec_widget.c, $Revision: 1.13 $ cm_update_float_widget.c, $Revision: 1.12 $ cm_update_int_widget.c, $Revision: 1.12 $ cm_update_list.c, $Revision: 1.6 $ cm_update_list_widget.c, $Revision: 1.23 $ cm_update_map.c, $Revision: 1.16 $ cm_update_map_entries.c, $Revision: 1.24 $ cm_update_string_widget.c, $Revision: 1.11 $ cm_validate_cmd.c, $Revision: 1.3 $ cm_validate_list_widget.c, $Revision: 1.3 $ cm_validate_str_len.c, $Revision: 1.6 $ cm_write_format_msg.c, $Revision: 1.2 $ cm_write_msg.c, $Revision: 1.7 $ get_token.c, $Revision: 1.19 $ insert_buttons_in_list.c, $Revision: 1.8 $ insert_str_list.c, $Revision: 1.8 $ keyword_response_expected.c, $Revision: 1.5 $ pull_msg_from_ll.c, $Revision: 1.9 $ strip_string.c, $Revision: 1.9 $ /usr/sbin/stm/lib/libdiagms.sl: ms_lib_rev.c, $Revision: 1.3 $ ms_append_pg_uut_stat_list_entry.c, $Revision: 1.7 $ ms_get_uut_op_info.c, $Revision: 1.4 $ ms_delete_pg_uut_stat_list_entry.c, $Revision: 1.7 $ ms_find_setup_list_entry.c, $Revision: 1.8 $ ms_handle_query_waiting.c, $Revision: 1.5 $ ms_add_sop_parm.c, $Revision: 1.6 $ ms_create_file_sem.c, $Revision: 1.7 $ ms_create_system_semaphores.c, $Revision: 1.3 $ ms_get_key_file_path.c, $Revision: 1.2 $ ms_log_st_info_to_act_log.c, $Revision: 1.5 $ ms_release_mon_uut_status.c, $Revision: 1.2 $ ms_release_saved_mon_uut_status.c, $Revision: 1.1 $ ms_release_uut_status.c, $Revision: 1.2 $ ms_delete_mon_uut_status_entry.c, $Revision: 1.2 $ ms_setup_mon_sys_global.c, $Revision: 1.2 $ ms_setup_mon_globals.c, $Revision: 1.10 $ ms_setup_system_resources.c, $Revision: 1.2 $ ms_delete_build_requestor.c, $Revision: 1.2 $ ms_notify_ui.c, $Revision: 1.2 $ ms_release_ports.c, $Revision: 1.1 $ ms_sys_cleanup_and_exit.c, $Revision: 1.4 $ ms_handle_hung_tool.c, $Revision: 1.2 $ ms_free_prev_found_hw_list.c, $Revision: 1.1 $ ms_abort_tool.c, $Revision: 1.21 $ ms_append_progress_global_entry.c, $Revision: 1.7 $ ms_build_exit_ll_msg.c, $Revision: 1.5 $ ms_build_exit_status_ll_msg.c, $Revision: 1.3 $ ms_get_uut_op_info.c, $Revision: 1.7 $ ms_get_new_progress_global_entry.c, $Revision: 1.4 $ ms_delete_progress_global_entry.c, $Revision: 1.2 $ ms_copy_log_file.c, $Revision: 1.16 $ ms_copy_logs_for_sop.c, $Revision: 1.14 $ ms_create_logs_dir_for_sop.c, $Revision: 1.15 $ ms_create_sop_shm.c, $Revision: 1.15 $ ms_create_sys_port.c, $Revision: 1.13 $ ms_delete_setup_list_entry.c, $Revision: 1.10 $ ms_execute_tool.c, $Revision: 1.26 $ ms_get_new_pg_uut_stat_list_entry.c, $Revision: 1.6 $ ms_interrupt_tool.c, $Revision: 1.5 $ ms_link_test_act_logs.c, $Revision: 1.14 $ ms_read_diagmon_config_file.c, $Revision: 1.9 $ ms_append_setup_list_entr.c, $Revision: 1.4 $ ms_complete_id_routine.c, $Revision: 1.8 $ ms_create_key_file_path.c, $Revision: 1.5 $ ms_execute_id_module.c, $Revision: 1.17 $ ms_get_avail_ops.c, $Revision: 1.3 $ ms_get_id_mod_name.c, $Revision: 1.5 $ ms_get_internal_results.c, $Revision: 1.5 $ ms_get_new_setup_list_entry.c, $Revision: 1.3 $ ms_get_uut_config_info.c, $Revision: 1.13 $ ms_remove_file_sem.c, $Revision: 1.6 $ ms_get_new_mon_uut_status.c, $Revision: 1.3 $ ms_get_new_download_info_entry.c, $Revision: 1.3 $ ms_delete_download_info_entry.c, $Revision: 1.2 $ ms_delete_download_info_entry.c, $Revision: 1.1 $ ms_resume_tool.c, $Revision: 1.11 $ ms_send_event_msg.c, $Revision: 1.8 $ ms_send_system_result.c, $Revision: 1.10 $ ms_send_download_reply.c, $Revision: 1.1 $ ms_send_host_info_reply.c, $Revision: 1.1 $ ms_setup_for_sop_exec.c, $Revision: 1.19 $ ms_setup_uut_stat_and_pg_uut_stat.c, $Revision: 1.14 $ ms_suspend_tool.c, $Revision: 1.18 $ ms_add_build_requestor.c, $Revision: 1.1 $ ms_abort_all_main_active.c, $Revision: 1.2 $ ms_abort_internal_active.c, $Revision: 1.2 $ ms_build_sys_port.c, $Revision: 1.2 $ ms_handle_exited_child.c, $Revision: 1.4 $ ms_handle_exited_build.c, $Revision: 1.6 $ ms_handle_exited_download.c, $Revision: 1.1 $ ms_handle_util_list.c, $Revision: 1.4 $ ms_manage_sys_sig_control.c, $Revision: 1.10 $ ms_log_start_to_syslogd.c, $Revision: 1.5 $ ms_log_exit_to_syslogd.c, $Revision: 1.8 $ ms_append_daemon_info_entry.c, $Revision: 1.2 $ ms_delete_daemon_info_entry.c, $Revision: 1.1 $ ms_setup_for_daemon_exec.c, $Revision: 1.2 $ ms_launch_daemons.c, $Revision: 1.3 $ ms_handle_compl_waiting.c, $Revision: 1.1 $ ms_handle_exited_tool.c, $Revision: 1.5 $ ms_handle_tools.c, $Revision: 1.6 $ ms_create_mon_uut_status_entries.c, $Revision: 1.12 $ ms_create_old_mon_uut_status_entries.c, $Revision: 1 .3 $ ms_create_mon_uut_status_header.c, $Revision: 1.12 $ ms_create_prev_found_hw_list.c, $Revision: 1.2 $ ms_saved_create_prev_found_hw_list.c, $Revision: 1.1 $ ms_cleanup_for_prev_found_hw_list.c, $Revision: 1.2 $ ms_download_file.c, $Revision: 1.2 $ ms_get_valid_lic.c, $Revision: 1.4 $ ms_rescan_hw.c, $Revision: 1.2 $ ms_get_hw_config.c, $Revision: 1.5 $ ms_update_uut_status.c, $Revision: 1.14 $ /usr/sbin/stm/lib/libdiagpl.sl: pl_lib_rev.c, $Revision: 1.2 $ pl_access_uut_status.c, $Revision: 1.8 $ pl_get_sys_global.c, $Revision: 1.13 $ pl_log_to_test_activity_log.c, $Revision: 1.7 $ pl_log_to_scan_hw_log.c, $Revision: 1.3 $ pl_complete_decode_routine.c, $Revision: 1.6 $ pl_copy_data.c, $Revision: 1.3 $ pl_log_to_activity_log.c, $Revision: 1.6 $ pl_overwrite_act_log_header.c, $Revision: 1.5 $ pl_release_activity_log.c, $Revision: 1.5 $ pl_release_id_mod_xref.c, $Revision: 1.3 $ pl_release_diagmon_config.c, $Revision: 1.3 $ pl_release_prod_op_xref.c, $Revision: 1.3 $ pl_release_util_list.c, $Revision: 1.3 $ pl_release_uut_status.c, $Revision: 1.3 $ pl_write_ui_log_header.c, $Revision: 1.2 $ pl_write_scan_hw_log_header.c, $Revision: 1.4 $ pl_write_ta_log_header.c, $Revision: 1.6 $ pl_get_file.c, $Revision: 1.8 $ pl_set_up_sys_req.c, $Revision: 1.2 $ pl_access_failure_log.c, $Revision: 1.15 $ pl_access_info_log.c, $Revision: 1.14 $ pl_access_prod_op_xref.c, $Revision: 1.12 $ pl_access_id_mod_xref.c, $Revision: 1.8 $ pl_access_io_decode_xref.c, $Revision: 1.1 $ pl_access_diagmon_config.c, $Revision: 1.4 $ pl_access_scan_hw_log.c, $Revision: 1.4 $ pl_access_util_list.c, $Revision: 1.8 $ pl_get_diagmond_pid.c, $Revision: 1.4 $ pl_access_test_activity_log.c, $Revision: 1.15 $ pl_append_to_data_file.c, $Revision: 1.12 $ pl_block_signals.c, $Revision: 1.13 $ pl_build_exit_ll_msg.c, $Revision: 1.4 $ pl_check_read_port.c, $Revision: 1.10 $ pl_cleanup_sig_pipe.c, $Revision: 1.10 $ pl_create_open_file.c, $Revision: 1.18 $ pl_create_port.c, $Revision: 1.14 $ pl_create_send_port.c, $Revision: 1.12 $ pl_gen_mod_control_handling.c, $Revision: 1.9 $ pl_gen_init_mod.c, $Revision: 1.5 $ pl_get_mod_data.c, $Revision: 1.7 $ pl_lock_file_for_append.c, $Revision: 1.11 $ pl_abort_internal_routine.c, $Revision: 1.8 $ pl_access_activity_log.c, $Revision: 1.9 $ pl_access_data_file.c, $Revision: 1.9 $ pl_access_ui_log.c, $Revision: 1.8 $ pl_build_exit_status_ll_msg.c, $Revision: 1.5 $ pl_block_sigchld.c, $Revision: 1.1 $ pl_block_suspend.c, $Revision: 1.6 $ pl_cleanup_sigchld.c, $Revision: 1.5 $ pl_copy_internal_err_log.c, $Revision: 1.10 $ pl_create_internal_shm.c, $Revision: 1.7 $ pl_create_shm.c, $Revision: 1.6 $ pl_delete_logs_for_sop.c, $Revision: 1.11 $ pl_delete_logs_for_sop.c, $Revision: 1.1 $ pl_execute_decode_mod.c, $Revision: 1.13 $ pl_execute_internal_routine.c, $Revision: 1.15 $ pl_get_curr_lic_info.c, $Revision: 1.3 $ pl_get_files_and_dirs.c, $Revision: 1.3 $ pl_get_lic_exp_info.c, $Revision: 1.1 $ pl_is_lic_rco.c, $Revision: 1.1 $ pl_install_lic.c, $Revision: 1.2 $ pl_deinstall_lic.c, $Revision: 1.1 $ pl_get_file_sem.c, $Revision: 1.5 $ pl_get_sys_port_num.c, $Revision: 1.3 $ pl_val_key_file_path.c, $Revision: 1.8 $ pl_handle_exited_decode.c, $Revision: 1.6 $ pl_init_st_log_global.c, $Revision: 1.5 $ pl_log_to_ui_log.c, $Revision: 1.7 $ pl_log_tool_start.c, $Revision: 1.5 $ pl_log_tool_ops.c, $Revision: 1.9 $ pl_read_uut_status_header.c, $Revision: 1.9 $ pl_read_uut_status_entry.c, $Revision: 1.4 $ pl_read_prod_op_entry.c, $Revision: 1.17 $ pl_read_id_mod_entry.c, $Revision: 1.6 $ pl_read_diagmon_config_entry.c, $Revision: 1.3 $ pl_read_io_decode_entry.c, $Revision: 1.1 $ pl_rel_file_sem.c, $Revision: 1.9 $ pl_release_data_file.c, $Revision: 1.3 $ pl_release_shm.c, $Revision: 1.2 $ pl_send_started_progress.c, $Revision: 1.2 $ pl_setup_sigchld.c, $Revision: 1.3 $ pl_setup_for_internal_mod_exec.c, $Revision: 1.8 $ pl_unblock_sigchld.c, $Revision: 1.1 $ pl_unblock_suspend.c, $Revision: 1.5 $ pl_validate_sop.c, $Revision: 1.5 $ pl_validate_test_parms.c, $Revision: 1.7 $ pl_read_data.c, $Revision: 1.15 $ pl_read_line.c, $Revision: 1.11 $ pl_receive_msg.c, $Revision: 1.27 $ pl_release_port.c, $Revision: 1.13 $ pl_send_msg.c, $Revision: 1.16 $ pl_setup_read_port.c, $Revision: 1.12 $ pl_setup_send_port.c, $Revision: 1.16 $ pl_setup_sig_pipe.c, $Revision: 1.10 $ pl_unblock_signals.c, $Revision: 1.13 $ pl_unlock_file_from_append.c, $Revision: 1.10 $ pl_write_data.c, $Revision: 1.16 $ pl_copy_file.c, $Revision: 1.12 $ pl_get_read_access_to_file.c, $Revision: 1.4 $ pl_get_valid_reply_msg.c, $Revision: 1.5 $ pl_setup_for_upload.c, $Revision: 1.9 $ pl_setup_port_for_upload_data.c, $Revision: 1.1 $ pl_upload_file.c, $Revision: 1.8 $ pl_declare_tool_globs.c, $Revision: 1.2 $ /usr/sbin/stm/lib/libdiagud.sl: add_to_selected_list.c, $Revision: 1.5 $ attach_to_port.c, $Revision: 1.5 $ check_box_validity.c, $Revision: 1.3 $ cu_check_box_validity.c, $Revision: 1.1 $ cu_format_lines.c, $Revision: 1.2 $ cu_get_menu_item.c, $Revision: 1.3 $ cu_get_list_entry.c, $Revision: 1.2 $ cu_get_cm_len.c, $Revision: 1.4 $ cu_get_double_value.c, $Revision: 1.5 $ cu_put_double_value.c, $Revision: 1.5 $ deallocate_help_index.c, $Revision: 1.6 $ deallocate_port.c, $Revision: 1.15 $ delete_uut.c, $Revision: 1.9 $ dispatch_help_viewer.c, $Revision: 1.14 $ display_map.c, $Revision: 1.6 $ escape_to_os.c, $Revision: 1.4 $ extract_msg_line.c, $Revision: 1.7 $ find_update_widget.c, $Revision: 1.3 $ get_client_event.c, $Revision: 1.3 $ get_help_index.c, $Revision: 1.6 $ get_interactive_request.c, $Revision: 1.18 $ get_menu_token.c, $Revision: 1.10 $ pull_cm_from_string.c, $Revision: 1.6 $ record_file.c, $Revision: 1.3 $ release_cm.c, $Revision: 1.3 $ run_command_file.c, $Revision: 1.9 $ store_menu_commands.c, $Revision: 1.6 $ store_menu_item.c, $Revision: 1.6 $ ud_close_target.c, $Revision: 1.5 $ ud_lib_rev.c, $Revision: 1.4 $ ud_record_wait.c, $Revision: 1.1 $ widget_fixed_len.c, $Revision: 1.6 $ write_map_in_file.c, $Revision: 1.3 $ add_box_validity.c, $Revision: 1.3 $ add_cat_info_to_msg.c, $Revision: 1.17 $ add_menu_item.c, $Revision: 1.10 $ add_uut.c, $Revision: 1.18 $ add_widget.c, $Revision: 1.64 $ allocate_widget.c, $Revision: 1.12 $ build_cm.c, $Revision: 1.10 $ check_options.c, $Revision: 1.15 $ close_command_file.c, $Revision: 1.15 $ core_display_init.c, $Revision: 1.50.1.1 $ create_dialog_box.c, $Revision: 1.25 $ create_dialog_info.c, $Revision: 1.71 $ cu_add_item_to_list.c, $Revision: 1.7 $ cu_delete_item_from_list.c, $Revision: 1.4 $ cu_find_item_in_list.c, $Revision: 1.4 $ cu_get_widget_info.c, $Revision: 1.17 $ cu_set_widget_/var_size.c, $Revision: 1.13 $ deallocate_dialog_info_struct.c, $Revision: 1.44 $ default_dialog_box.c, $Revision: 1.28 $ display_interactive_request.c, $Revision: 1.40 $ expand_ll_msg.c, $Revision: 1.28 $ get_file_overwrite_conf.c, $Revision: 1.4 $ get_msg_opt_token.c, $Revision: 1.27 $ get_target_input.c, $Revision: 1.25 $ get_value_from_user.c, $Revision: 1.6 $ increment_nest_count.c, $Revision: 1.6 $ invoke_shell.c, $Revision: 1.2 $ monitor_dialog_port.c, $Revision: 1.30 $ parse_dialog_box_line.c, $Revision: 1.25 $ parse_location_id.c, $Revision: 1.3 $ parse_menu_command_options.c, $Revision: 1.19 $ print_expand_msg_error.c, $Revision: 1.2 $ process_target_input.c, $Revision: 1.80 $ pull_cm_from_ll.c, $Revision: 1.17 $ queue_interactive_request.c, $Revision: 1.4 $ record_dialog_box.c, $Revision: 1.22 $ record_map.c, $Revision: 1.7 $ record_cat_msg.c, $Revision: 1.2 $ record_cmd_file.c, $Revision: 1.6 $ record_output_file.c, $Revision: 1.6 $ reply_to_client.c, $Revision: 1.24 $ save_client_event.c, $Revision: 1.3 $ ui_core_poll_and_process_input.c, $Revision: 1.19 $ ui_core_poll_for_input.c, $Revision: 1.32 $ update_dialog_box.c, $Revision: 1.19 $ update_dialog_box_menu.c, $Revision: 1.17 $ update_list.c, $Revision: 1.4 $ update_map.c, $Revision: 1.11 $ update_text.c, $Revision: 1.15 $ validate_field.c, $Revision: 1.29 $ /usr/sbin/stm/lib/libdiagum.sl: ti_close_target.c, $Revision: 1.8 $ ti_destroy_dialog_box.c, $Revision: 1.7 $ um_append_movement_entry.c, $Revision: 1.3 $ um_append_sub_pad.c, $Revision: 1.3 $ um_calc_display_size.c, $Revision: 1.4 $ um_calc_file_spec_display_size.c, $Revision: 1.4 $ um_calc_list_display_size.c, $Revision: 1.5 $ um_calc_map_display_size.c, $Revision: 1.4 $ um_calc_map_num_valid_lines.c, $Revision: 1.2 $ um_find_any_item_at_prev_level.c, $Revision: 1.2 $ um_find_first_item_at_next_level.c, $Revision: 1.3 $ um_find_next_item_at_level.c, $Revision: 1.3 $ um_find_prev_item_at_level.c, $Revision: 1.3 $ um_find_subpad_for_widget.c, $Revision: 1.3 $ um_get_remote_files_and_dirs.c, $Revision: 1.2 $ um_get_starting_menu_item.c, $Revision: 1.3 $ um_get_subpad_yx.c, $Revision: 1.4 $ um_handle_key_left.c, $Revision: 1.4 $ um_handle_key_right.c, $Revision: 1.4 $ um_handle_list_key_down.c, $Revision: 1.2 $ um_handle_list_key_up.c, $Revision: 1.2 $ um_handle_non_input.c, $Revision: 1.5 $ um_handle_paging_input.c, $Revision: 1.4 $ um_handle_text_input.c, $Revision: 1.3 $ um_refresh_other_widgets.c, $Revision: 1.4 $ um_release_sub_pad_list.c, $Revision: 1.3 $ um_release_sub_pad_list.c, $Revision: 1.4 $ ti_create_dialog_box.c, $Revision: 1.18 $ ti_escape_to_os.c, $Revision: 1.6 $ ti_get_input.c, $Revision: 1.20 $ ti_open_target.c, $Revision: 1.16.1.1 $ ti_select_dialog_box.c, $Revision: 1.4 $ ti_select_dialog_box.c, $Revision: 1.9 $ ti_show_help.c, $Revision: 1.3 $ ti_select_dialog_box.c, $Revision: 1.11 $ ti_update_menu.c, $Revision: 1.3 $ um_add_bool_widget.c, $Revision: 1.9 $ um_add_bracketed_input.c, $Revision: 1.5 $ um_add_double_widget.c, $Revision: 1.3 $ um_add_file_spec_widget.c, $Revision: 1.10 $ um_add_float_widget.c, $Revision: 1.3 $ um_add_int_widget.c, $Revision: 1.11 $ um_add_label_widget.c, $Revision: 1.13 $ um_add_label_and_col.c, $Revision: 1.4 $ um_add_list_widget.c, $Revision: 1.16 $ um_add_map_widget.c, $Revision: 1.9 $ um_add_present_widget.c, $Revision: 1.16 $ um_add_rad_button_widget.c, $Revision: 1.9 $ um_add_string_widget.c, $Revision: 1.11 $ um_add_text_widget.c, $Revision: 1.3 $ um_add_view_widget.c, $Revision: 1.8 $ um_build_cmd_menu.c, $Revision: 1.14 $ um_build_push_buttons.c, $Revision: 1.4 $ um_calc_file_lines.c, $Revision: 1.5 $ um_copy_sub_pad.c, $Revision: 1.9 $ um_copy_sub_pad_and_refresh.c, $Revision: 1.4 $ um_copywin.c, $Revision: 1.7 $ um_create_dialog_pad.c, $Revision: 1.19 $ um_create_map_subpads.c, $Revision: 1.3 $ um_create_movement_entry.c, $Revision: 1.5 $ um_create_pad.c, $Revision: 1.31 $ um_create_subpad_entry.c, $Revision: 1.4 $ um_create_target_data.c, $Revision: 1.4 $ um_display_msg_help.c, $Revision: 1.6 $ um_display_pad.c, $Revision: 1.9 $ um_get_local_files_and_dirs.c, $Revision: 1.4 $ um_handle_interrupt.c, $Revision: 1.7 $ um_handle_map_input.c, $Revision: 1.8 $ um_handle_other_input.c, $Revision: 1.37 $ um_handle_view_input.c, $Revision: 1.6 $ um_move_to_entry.c, $Revision: 1.14 $ um_move_to_next.c, $Revision: 1.4 $ um_move_to_prev.c, $Revision: 1.4 $ um_prepend_button.c, $Revision: 1.6 $ um_read_lines_into_pad.c, $Revision: 1.6 $ um_read_subpad_line.c, $Revision: 1.2 $ um_redraw_buttons.c, $Revision: 1.4 $ um_refresh_keys.c, $Revision: 1.21 $ um_refresh_map_widget.c, $Revision: 1.6 $ um_refresh_pad.c, $Revision: 1.13 $ um_refresh_screen.c, $Revision: 1.11 $ um_refresh_view_widget.c, $Revision: 1.4 $ um_start_loc_id_help.c, $Revision: 1.12 $ um_toggle_select_for_entry.c, $Revision: 1.2 $ um_unselect_all_in_pad.c, $Revision: 1.2 $ um_update_cursor.c, $Revision: 1.5 $ um_update_map_entries.c, $Revision: 1.3 $ um_update_map_prompt.c, $Revision: 1.2 $ um_update_map_titles.c, $Revision: 1.4 $ um_update_map_widget.c, $Revision: 1.7 $ um_update_other_widget.c, $Revision: 1.21 $ um_update_text_widget.c, $Revision: 1.3 $ /usr/sbin/stm/lib/libuicom.sl: ccu_append_locked_file.c, $Revision: 1.5 $ ccu_block_signals.c, $Revision: 1.2 $ ccu_create_open_file.c, $Revision: 1.9 $ ccu_get_curr_host_id.c, $Revision: 1.5 $ ccu_log_complex_error.c, $Revision: 1.2 $ ccu_log_error_msg.c, $Revision: 1.5 $ ccu_log_simple_error.c, $Revision: 1.3 $ ccu_rename_file.c, $Revision: 1.5 $ ccu_ui_init.c, $Revision: 1.5 $ ccu_ui_resource_error.c, $Revision: 1.4 $ ccu_unblock_signals.c, $Revision: 1.1 $ ccu_uut_connect.c, $Revision: 1.12 $ ccu_uut_disconnect.c, $Revision: 1.4 $ ccu_rm_tmp_dir.c, $Revision: 1.5 $ ccu_validate_create_path.c, $Revision: 1.6 $ ccu_write_buffer_to_file.c, $Revision: 1.4 $ ccu_close_file.c, $Revision: 1.7 $ ccu_filedes_stat.c, $Revision: 1.4 $ ccu_filepath_stat.c, $Revision: 1.7 $ ccu_make_ui_data_file_path.c, $Revision: 1.4 $ ccu_make_ui_file_path.c, $Revision: 1.9 $ /usr/sbin/stm/ui/bin/stm: GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_LICENSE.C, $Revision: 1.24 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DECODE_STABLE_STORAGE.C, $Revision: 1.5 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_HVERSION.C, $Revision: 1.12 $ MAKE_LIC_AR.H, $Revision: 1.31 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ IS_RCO_LICENSE_INSTALLED.C, $Revision: 1.6 $ LIC_GET_DATE.C, $Revision: 1.5 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ READ_FROM_SS.C, $Revision: 1.5 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ CONVERT_DATE, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ stm.c, $Revision: 1.28 $ cc_init_main_window.c, $Revision: 1.15 $ cc_main_loop.c, $Revision: 1.19 $ cc_read_startup_files.c, $Revision: 1.6 $ cc_ui_sig_handler.c, $Revision: 1.4 $ cc_execute_client_event.c, $Revision: 1.11 $ cc_abort_cmd_file.c, $Revision: 1.1 $ cc_abort_interactive_tool.c, $Revision: 1.2 $ cc_cstm_help_viewer.c, $Revision: 1.10 $ cc_file_viewer.c, $Revision: 1.27 $ cc_abort_int_tool_done_func.c, $Revision: 1.2 $ cc_abort_log_formatter_done_func.c, $Revision: 1.2 $ cc_cstm_dump_file.c, $Revision: 1.4 $ cc_cstm_help_viewer_done_func.c, $Revision: 1.3 $ cc_cstm_view_file.c, $Revision: 1.4 $ cc_exit_help.c, $Revision: 1.4 $ cc_free_help_locid_list.c, $Revision: 1.1 $ cc_gettopicdata.c, $Revision: 1.2 $ cc_new_help_locid.c, $Revision: 1.2 $ cc_select_help_home_topic.c, $Revision: 1.3 $ cc_select_help_next_topic.c, $Revision: 1.2 $ cc_select_help_prev_topic.c, $Revision: 1.3 $ cc_mc_exit.c, $Revision: 1.7 $ cc_mc_os.c, $Revision: 1.1 $ cc_mc_recordcmdfile.c, $Revision: 1.8 $ cc_mc_recordmap.c, $Revision: 1.4 $ cc_mc_recordoutput.c, $Revision: 1.9 $ cc_mc_rereaduutconfig.c, $Revision: 1.3 $ cc_mc_resetsysactlog.c, $Revision: 1.1 $ cc_mc_restoreconfig.c, $Revision: 1.7 $ cc_mc_runcmdfile.c, $Revision: 1.9 $ cc_mc_saveconfig.c, $Revision: 1.1 $ cc_mc_stoprecordcmd.c, $Revision: 1.7 $ cc_mc_stoprecordout.c, $Revision: 1.6 $ cc_exit_done_func.c, $Revision: 1.2 $ cc_saveconfig_done_func.c, $Revision: 1.7 $ cc_recordcmdfile_done_func.c, $Revision: 1.11 $ cc_recordoutput_done_func.c, $Revision: 1.11 $ cc_restoreconfig_done_func.c, $Revision: 1.4 $ cc_runcmdfile_done_func.c, $Revision: 1.6 $ cc_mc_connectsys.c, $Revision: 1.3 $ cc_mc_deinstalllic.c, $Revision: 1.3 $ cc_mc_disconnectsys.c, $Revision: 1.1 $ cc_mc_displaylic.c, $Revision: 1.1 $ cc_mc_hplicense.c, $Revision: 1.2 $ cc_mc_license.c, $Revision: 1.3 $ cc_mc_printmap.c, $Revision: 1.6 $ cc_mc_rescanhw.c, $Revision: 1.2 $ cc_mc_savemap.c, $Revision: 1.4 $ cc_mc_selcurrentsys.c, $Revision: 1.3 $ ccu_disconnect_system.c, $Revision: 1.13 $ cc_connectsys_done_func.c, $Revision: 1.8 $ cc_deinstall_confirm_done_func.c, $Revision: 1.3 $ cc_disconnectsys_done_func.c, $Revision: 1.3 $ cc_disconnect_system_done_func.c, $Revision: 1.3 $ cc_host_info_superlist_callback.c, $Revision: 1.18 $ cc_hplicense_done_func.c, $Revision: 1.5 $ cc_license_done_func.c, $Revision: 1.5 $ cc_rescanhw_done_func.c, $Revision: 1.7 $ cc_savemap_done_func.c, $Revision: 1.6 $ cc_selcurrentsys_done_func.c, $Revision: 1.9 $ ccu_assemble_host_list_items.c, $Revision: 1.6 $ ccu_build_host_superlist_msgs.c, $Revision: 1.3 $ ccu_free_host_info_list_/vars.c, $Revision: 1.1 $ ccu_free_host_info_superlist_/vars.c, $Revision: 1.3 $ ccu_setup_host_info_list_/vars.c, $Revision: 1.3 $ ccu_setup_host_info_superlist_/vars.c, $Revision: 1. 5 $ ccu_setup_license_dialog_/vars.c, $Revision: 1.2 $ cc_connectsys_logon_done_func.c, $Revision: 1.7 $ cc_selcurrentsys_logon_done_func.c, $Revision: 1.8 $ ccu_build_host_info_list_item.c, $Revision: 1.5 $ ccu_check_license_expiration_date.c, $Revision: 1.2 $ ccu_connection_logon.c, $Revision: 1.6 $ ccu_new_currentsys.c, $Revision: 1.18 $ ccu_next_sel_host_list_item.c, $Revision: 1.6 $ ccu_setup_host_info.c, $Revision: 1.8 $ ccu_connect_system.c.c, $Revision: 1.7 $ ccu_get_host_info.c, $Revision: 1.7 $ cc_diagoptions_init.c, $Revision: 1.1 $ cc_exeroptions_init.c, $Revision: 1.2 $ cc_expoptions_init.c, $Revision: 1.1 $ cc_fwupoptions_init.c, $Revision: 1.2 $ cc_genoptions_init.c, $Revision: 1.7 $ cc_idoptions_init.c, $Revision: 1.1 $ cc_launoptions_init.c, $Revision: 1.7 $ cc_mc_diagoptions.c, $Revision: 1.6 $ cc_mc_exeroptions.c, $Revision: 1.6 $ cc_mc_expoptions.c, $Revision: 1.4 $ cc_mc_fwupdateoptions.c, $Revision: 1.6 $ cc_mc_generaloptions.c, $Revision: 1.15 $ cc_mc_idoptions.c, $Revision: 1.4 $ cc_mc_launchoptions.c, $Revision: 1.8 $ cc_mc_utiloptions.c, $Revision: 1.5 $ cc_mc_veroptions.c, $Revision: 1.5 $ cc_utiloptions_init.c, $Revision: 1.1 $ cc_veroptions_init.c, $Revision: 1.1 $ cc_mc_mapoptions.c, $Revision: 1.10 $ cc_mc_cleartoolstatus.c, $Revision: 1.7 $ cc_mc_currdevstatus.c, $Revision: 1.9 $ cc_mc_selall.c, $Revision: 1.5 $ cc_mc_selclass.c, $Revision: 1.8 $ cc_mc_unselall.c, $Revision: 1.5 $ cc_mc_unselclass.c, $Revision: 1.9 $ cc_selclass_done_func.c, $Revision: 1.7 $ cc_unselclass_done_func.c, $Revision: 1.7 $ cc_mc_aborttool.c, $Revision: 1.3 $ cc_mc_abortutil.c, $Revision: 1.4 $ cc_mc_attach.c, $Revision: 1.2 $ cc_mc_diaginfo.c, $Revision: 1.5 $ cc_mc_diagnose.c, $Revision: 1.3 $ cc_mc_displayquery.c, $Revision: 1.3 $ cc_mc_exercise.c, $Revision: 1.3 $ cc_mc_exerinfo.c, $Revision: 1.5 $ cc_mc_experttool.c, $Revision: 1.6 $ cc_mc_expinfo.c, $Revision: 1.5 $ cc_mc_firmwareupdate.c, $Revision: 1.6 $ cc_mc_fwinfo.c, $Revision: 1.5 $ cc_mc_infoinfo.c, $Revision: 1.4 $ cc_mc_information.c, $Revision: 1.4 $ cc_mc_resumetool.c, $Revision: 1.3 $ cc_mc_runutility.c, $Revision: 1.4 $ cc_mc_suspendtool.c, $Revision: 1.3 $ cc_mc_utilinfo.c, $Revision: 1.6 $ cc_mc_verify.c, $Revision: 1.3 $ cc_mc_verinfo.c, $Revision: 1.4 $ cc_mc_wait.c, $Revision: 1.5 $ cc_wait_check.c, $Revision: 1.7 $ ccu_process_query_pending.c, $Revision: 1.6 $ cc_abort_util_done_func.c, $Revision: 1.4 $ cc_attach_done_func.c, $Revision: 1.1 $ ccu_chk_valid_init_tool_dev.c, $Revision: 1.4 $ ccu_display_info.c, $Revision: 1.6 $ ccu_initiate_st.c, $Revision: 1.3 $ ccu_monitor_dialog_port.c, $Revision: 1.5 $ ccu_setup_util_list.c, $Revision: 1.4 $ ccu_start_non_init_tool.c, $Revision: 1.3 $ cc_mc_help.c, $Revision: 1.2 $ cc_mc_helponapplication.c, $Revision: 1.1 $ cc_mc_helponhelp.c, $Revision: 1.1 $ cc_mc_helponitem.c, $Revision: 1.1 $ cc_mc_helpontasks.c, $Revision: 1.1 $ cc_mc_helponversion.c, $Revision: 1.4 $ cc_init_map_read_proc.c, $Revision: 1.9 $ cc_load_uut_status.c, $Revision: 1.20 $ cc_map_callback.c, $Revision: 1.6 $ ccu_signal_map_config_update.c, $Revision: 1.5 $ ccu_signal_map_update.c, $Revision: 1.6 $ ccu_write_map_read_proc_config.c, $Revision: 1.7 $ ccu_map_signal_error.c, $Revision: 1.1 $ ccu_append_device_str.c, $Revision: 1.3 $ ccu_append_strings.c, $Revision: 1.4 $ ccu_base_cmd_set.c, $Revision: 1.4 $ ccu_build_in_progress.c, $Revision: 1.4 $ ccu_cleanup_and_exit.c, $Revision: 1.9 $ ccu_clear_map.c, $Revision: 1.4 $ ccu_close_command_file.c, $Revision: 1.11 $ ccu_copy_ll_msg.c, $Revision: 1.2 $ ccu_copy_string_with_pad_trunc.c, $Revision: 1.1 $ ccu_count_util_list_type.c, $Revision: 1.2 $ ccu_create_stm_banner.c, $Revision: 1.2 $ ccu_device_main_menu_cmds.c, $Revision: 1.11 $ ccu_disconnect_cmd.c, $Revision: 1.1 $ ccu_disconnect_current_for_error.c, $Revision: 1.7 $ ccu_display_complex_info.c, $Revision: 1.9 $ ccu_display_error_msg.c, $Revision: 1.6 $ ccu_display_simple_info.c, $Revision: 1.4 $ ccu_expand_ll_msg.c, $Revision: 1.9 $ ccu_fill_util_list_type.c, $Revision: 1.2 $ ccu_get_ll_msg_info.c, $Revision: 1.3 $ ccu_get_util_list.c, $Revision: 1.4 $ ccu_initial_main_menu_cmds.c, $Revision: 1.2 $ ccu_loading_map.c, $Revision: 1.3 $ ccu_log_and_display_complex_error.c, $Revision: 1.10 $ ccu_log_and_display_simple_error.c, $Revision: 1.10 $ ccu_log_malloc_error_and_exit.c, $Revision: 1.8 $ ccu_make_filter_file_path.c, $Revision: 1.17 $ make_tmp_dir_path.c, $Revision: 1.2 $ ccu_menu_chg.c, $Revision: 1.4 $ ccu_pg_api_error.c, $Revision: 1.13 $ ccu_print_dialog_setup.c, $Revision: 1.16 $ ccu_print_expand_msg_error.c, $Revision: 1.3 $ ccu_rcrd_menu_cmds.c, $Revision: 1.6 $ ccu_remove_file.c, $Revision: 1.4 $ ccu_run_command_file.c, $Revision: 1.18 $ ccu_run_string.c, $Revision: 1.8 $ ccu_signal.c, $Revision: 1.8 $ ccu_ui_api_error.c, $Revision: 1.4 $ ccu_update_map.c, $Revision: 1.1 $ ccu_uut_main_menu_cmds.c, $Revision: 1.4 $ cc_loading_map_done_func.c, $Revision: 1.1 $ ccu_abort_cmd_file_done_func.c, $Revision: 1.6 $ ccu_build_in_progress_cmds.c, $Revision: 1.1 $ ccu_set_avail_util_ops.c, $Revision: 1.3 $ ccu_signal_terminate_map_proc.c, $Revision: 1.5 $ ccu_tool_management_cmds.c, $Revision: 1.7 $ ccu_utility_control_cmds.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/sys/diagmond: GET_DATE_INFORMATION.C, $Revision: 1.10 $ GET_LICENSE.C, $Revision: 1.24 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ INSTALL_LICENSE.C, $Revision: 1.15 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ MAKE_LICENSE.C, $Revision: 1.20 $ STABLE_STORE_INFO.C, $Revision: 1.15 $ WRITE_TO_SS.C, $Revision: 1.8 $ check_temp.h,$Revision: 1.5 $ CHECK_TEMP_LICENSE.C,$Revision: 1.10 $ DECODE_STABLE_STORAGE.C, $Revision: 1.5 $ DETERMINE_EXPIRATION_DATE.C, $Revision: 1.6 $ GET_HVERSION.C, $Revision: 1.12 $ MAKE_LIC_AR.H, $Revision: 1.31 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ GET_ROW_COL.C, $Revision: 1.7 $ GET_SW_ID.C, $Revision: 1.12 $ GET_SYSTEM_TYPE.C, $Revision: 1.7 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ MAKE_LIC_INTERNAL.H, $Revision: 1.4 $ HVERSION_RECOGNIZED, $Revision: 1.2 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ INSTALL_RCO_LICENSE.C, $Revision: 1.11 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ IS_RCO_LICENSE_INSTALLED.C, $Revision: 1.6 $ LIC_GET_DATE.C, $Revision: 1.5 $ OVERLAP_PASSWORDS.C, $Revision: 1.6 $ READ_FROM_SS.C, $Revision: 1.5 $ check_temp.h,$Revision: 1.5 $ COMPARE_TEMP_HP.C, $Revision: 1.6 $ CONVERT_DATE, $Revision: 1.6 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GATHER_INFORMATION.C, $Revision: 1.4 $ MAKE_DATE_CANONICAL.C, 7/1/92, A.01.00 INSTALL_PASS_INTERNAL,$Revision: 1.12 $ SEARCH_FOR_SESSION.C, $Revision: 1.4 $ check_temp.h,$Revision: 1.5 $ FIND_BEGINNING_DATE.C, $Revision: 1.5 $ GET_BOOT_TIME.C, $Revision: 1.5 $ INSTALL_PASS_INTERNAL,$Revision: 1.12 $ GET_SESSION_ID.C, $Revision: 1.7 $ diagmond_main.c, $Revision: 1.15 $ ms_make_daemon.c, $Revision: 1.3 $ ms_init_manage_sys.c, $Revision: 1.6 $ ms_build_status_map.c, $Revision: 1.8 $ ms_setup_scan_hw_sys_global.c, $Revision: 1.2 $ ms_check_uut_status.c, $Revision: 1.2 $ ms_scan_children.c, $Revision: 1.3 $ ms_get_valid_request.c, $Revision: 1.12 $ ms_handle_access_dev.c, $Revision: 1.4 $ ms_handle_release_dev.c, $Revision: 1.4 $ ms_handle_device_request.c, $Revision: 1.5 $ ms_handle_get_query.c, $Revision: 1.6 $ ms_handle_host_info_request.c, $Revision: 1.4 $ ms_handle_update_session_lic.c, $Revision: 1.3 $ ms_handle_install_lic.c, $Revision: 1.4 $ ms_handle_deinstall_lic.c, $Revision: 1.1 $ ms_handle_system_request.c, $Revision: 1.4 $ ms_handle_test_progress.c, $Revision: 1.13 $ ms_handle_admin_request.c, $Revision: 1.20 $ ms_handle_download_request.c, $Revision: 1.10 $ ms_handle_reread_lic.c, $Revision: 1.3 $ ms_recreate_mon_uut_status.c, $Revision: 1.3 $ ms_handle_reset_ops.c, $Revision: 1.3 $ ms_handle_reread_ops.c, $Revision: 1.2 $ ms_handle_reset_act_log.c, $Revision: 1.5 $ mon_add_sop_parm.c, $Revision: 1.3 $ ms_handle_control.c, $Revision: 1.9 $ ms_handle_test_request.c, $Revision: 1.14 $ ms_handle_uut_release.c, $Revision: 1.7 $ ms_handle_uut_setup.c, $Revision: 1.15 $ ms_handle_start.c, $Revision: 1.8 $ ms_validate_user.c, $Revision: 1.8 $ ms_setup_mon_uut_status.c, $Revision: 1.7 $ ms_create_mon_uut_status.c, $Revision: 1.7 $ ms_recreate_mon_uut_status.c, $Revision: 1.3 $ ms_cleanup_for_exited_ui.c, $Revision: 1.18 $ /usr/sbin/stm/uut/bin/tools/diagnose/diag_dds: call_scsi_dev_io.c, $Revision: 1.1 $ check_and_report_progress.c, $Revision: 1.1 $ check_for_done.c, $Revision: 1.1 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ decode_error.c, $Revision: 1.2 $ diagnose_device.c, $Revision: 1.1 $ diagnose_mech.c, $Revision: 1.6 $ diagnose_mod.c, $Revision: 1.3 $ exec_check_log.c, $Revision: 1.2 $ exec_clear_log.c, $Revision: 1.1 $ exec_max_coverage.c, $Revision: 1.3 $ exec_mode_select.c, $Revision: 1.1 $ exec_mode_sense.c, $Revision: 1.1 $ exec_predict.c, $Revision: 1.1 $ exec_tur.c, $Revision: 1.1 $ exec_unload.c, $Revision: 1.1 $ init_tool_control.c, $Revision: 1.1 $ perform_diagnose.c, $Revision: 1.3 $ query_user.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/diagnose/diag_dlt: call_scsi_dev_io.c, $Revision: 1.1 $ check_and_report_progress.c, $Revision: 1.1 $ check_for_done.c, $Revision: 1.1 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ diagnose_device.c, $Revision: 1.1 $ diagnose_mech.c, $Revision: 1.3 $ decode_error.c, $Revision: 1.4 $ diagnose_mod.c, $Revision: 1.2 $ exec_log_test.c, $Revision: 1.2 $ exec_tur.c, $Revision: 1.1 $ init_tool_control.c, $Revision: 1.1 $ perform_diagnose.c, $Revision: 1.1 $ query_user.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/tools/diagnose/atmd: atmdevdl.c, $Revision: 1.3 $ atmdevmg.c, $Revision: 1.3 $ atmdiag.c, $Revision: 1.3 $ atmdl.c, $Revision: 1.3 $ atmdm.c, $Revision: 1.4 $ atmdmcon.c, $Revision: 1.3 $ atmdmide.c, $Revision: 1.3 $ atmdmio.c, $Revision: 1.4 $ atmdmloo.c, $Revision: 1.4 $ atmdmpol.c, $Revision: 1.3 $ atmdmsig.c, $Revision: 1.3 $ atmlb.c, $Revision: 1.4 $ atmlog.c, $Revision: 1.3 $ access_device.c, $Revision: 1.2 $ check_and_report_progress.c, $Revision: 1.2 $ check_for_done.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.2 $ diagnose_device.c, $Revision: 1.2 $ init_tool_control.c, $Revision: 1.1 $ perform_diagnose.c, $Revision: 1.2 $ query_user.c, $Revision: 1.2 $ release_device.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/exercise/devinfo.3d: None /usr/sbin/stm/uut/bin/tools/exercise/cpu: exercise_mod.c, $Revision: 1.3 $ cleanup_and_exit.c, $Revision: 1.3 $ perform_exercise.c, $Revision: 1.5 $ setup_device_access.c, $Revision: 1.4 $ exercise_device.c, $Revision: 1.5 $ log_msg.c, $Revision: 1.1 $ release_device.c, $Revision: 1.3 $ cachetlb.c, $Revision: 1.14.1.1 $ mp_fpu.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/exercise/disk: exercise_mod.c, $Revision: 1.1 $ access_device.c, $Revision: 1.6 $ cleanup_and_exit.c, $Revision: 1.6 $ log_msg.c, $Revision: 1.3 $ perform_exercise.c, $Revision: 1.4 $ query_user.c, $Revision: 1.2 $ diaglog_user.c, $Revision: 1.2 $ exercise_device.c, $Revision: 1.8 $ setup_device_access.c, $Revision: 1.4 $ setup_global_dev_info.c, $Revision: 1.7 $ /usr/sbin/stm/uut/bin/tools/exercise/memory: memdaf.c, $Revision: 1.4 $, $Date: 96/03/05 14:19:02 $ exercise_mod.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.4 $ perform_exercise.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.2 $ exercise_device.c, $Revision: 1.2 $ log_msg.c, $Revision: 1.1 $ release_device.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/expert/ara_ex: ara_ex_mod.c, $Revision: 1.6 $ cleanup_and_exit.c, $Revision: 1.3 $ display_caution.c, $Revision: 1.3 $ display_continue.c, $Revision: 1.3 $ display_help_loc_id.c, $Revision: 1.3 $ display_help_msg.c, $Revision: 1.3 $ display_main.c, $Revision: 1.3 $ do_cancel_rebuild.c, $Revision: 1.2 $ do_cancel_test.c, $Revision: 1.4 $ do_clr_cont_logs.c, $Revision: 1.8 $ do_clr_disk_logs.c, $Revision: 1.6 $ do_create_lun.c, $Revision: 1.4 $ do_delete_lun.c, $Revision: 1.4 $ do_down_disk.c, $Revision: 1.5 $ do_dsp_disk_logs.c, $Revision: 1.9 $ do_dsp_disks.c, $Revision: 1.2 $ do_dsp_event_log.c, $Revision: 1.11 $ do_dsp_luns.c, $Revision: 1.2 $ do_dsp_rbld_status.c, $Revision: 1.2 $ do_dsp_test_results.c, $Revision: 1.2 $ do_dsp_usage_log.c, $Revision: 1.11 $ do_exit.c, $Revision: 1.7 $ do_format_array.c, $Revision: 1.2 $ do_format_lun.c, $Revision: 1.2 $ do_general_help.c, $Revision: 1.4 $ do_get_disks.c, $Revision: 1.1 $ do_include_disk.c, $Revision: 1.4 $ do_read_test.c, $Revision: 1.7 $ do_rebuild_array.c, $Revision: 1.2 $ do_renumber_lun.c, $Revision: 1.3 $ do_reset.c, $Revision: 1.6 $ do_restart.c, $Revision: 1.12 $ do_selftest.c, $Revision: 1.5 $ do_set_options.c, $Revision: 1.7 $ do_shutdown.c, $Revision: 1.8 $ do_version_help.c, $Revision: 1.4 $ do_write_test.c, $Revision: 1.6 $ expert_main.c, $Revision: 1.20 $ expert_setup.c, $Revision: 1.7 $ get_array_data.c, $Revision: 1.4 $ get_inquiry_data.c, $Revision: 1.3 $ handle_interrupt.c, $Revision: 1.3 $ invoke_arraydsp.c, $Revision: 1.5 $ release_device.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.7 $ /usr/sbin/stm/uut/bin/tools/expert/scsi_dds: call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ chg_active_partition.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.1 $ create_temp_file.c, $Revision: 1.2 $ decode_io_status.c, $Revision: 1.1 $ display_caution.c, $Revision: 1.1 $ display_continue.c, $Revision: 1.1 $ display_help_loc_id.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_clear_log.c, $Revision: 1.2 $ do_describe.c, $Revision: 1.1 $ do_display_both.c, $Revision: 1.1 $ do_display_hex.c, $Revision: 1.1 $ do_display_interpreted.c, $Revision: 1.1 $ do_exit.c, $Revision: 1.1 $ do_general_help.c, $Revision: 1.3 $ do_mode_sense.c, $Revision: 1.2 $ do_prevent_allow.c, $Revision: 1.1 $ do_rewind.c, $Revision: 1.2 $ do_selftest.c, $Revision: 1.4 $ do_tape_copy.c, $Revision: 1.5 $ do_tape_info.c, $Revision: 1.1 $ do_tur.c, $Revision: 1.2 $ do_unload_tape.c, $Revision: 1.1 $ do_validate.c, $Revision: 1.4 $ do_version_help.c, $Revision: 1.1 $ do_view_bad_grp_log.c, $Revision: 1.3 $ do_view_cap_log.c, $Revision: 1.2 $ do_view_eeprom_log.c, $Revision: 1.4 $ do_view_parm_log.c, $Revision: 1.2 $ do_view_trace_log.c, $Revision: 1.6 $ exec_clear_log.c, $Revision: 1.1 $ exec_mode_select.c, $Revision: 1.1 $ exec_mode_sense.c, $Revision: 1.1 $ exec_read.c, $Revision: 1.2 $ exec_view_log.c, $Revision: 1.4 $ expert_main.c, $Revision: 1.6 $ expert_mod.c, $Revision: 1.4 $ expert_setup.c, $Revision: 1.1 $ get_tapecopy_target.c, $Revision: 1.1 $ handle_interrupt.c, $Revision: 1.1 $ output_hex.c, $Revision: 1.1 $ pulse.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ remove_file.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/expert/scsi_dlt: call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ create_temp_file.c, $Revision: 1.2 $ decode_io_status.c, $Revision: 1.1 $ display_caution.c, $Revision: 1.1 $ display_continue.c, $Revision: 1.1 $ display_help_loc_id.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_clear_log.c, $Revision: 1.1 $ do_describe.c, $Revision: 1.1 $ do_display_both.c, $Revision: 1.1 $ do_display_hex.c, $Revision: 1.1 $ do_display_interpreted.c, $Revision: 1.1 $ do_drv_info.c, $Revision: 1.2 $ do_exit.c, $Revision: 1.1 $ do_general_help.c, $Revision: 1.1 $ do_mode_sense.c, $Revision: 1.1 $ do_prevent_allow.c, $Revision: 1.1 $ do_rewind.c, $Revision: 1.1 $ do_selftest.c, $Revision: 1.2 $ do_tape_copy.c, $Revision: 1.3 $ do_tur.c, $Revision: 1.1 $ do_unload_tape.c, $Revision: 1.1 $ do_validate.c, $Revision: 1.2 $ do_version_help.c, $Revision: 1.1 $ do_view_parm_log.c, $Revision: 1.1 $ exec_clear_log.c, $Revision: 1.1 $ exec_mode_select.c, $Revision: 1.1 $ exec_mode_sense.c, $Revision: 1.1 $ exec_read.c, $Revision: 1.2 $ exec_view_log.c, $Revision: 1.1 $ expert_main.c, $Revision: 1.4 $ expert_mod.c, $Revision: 1.4 $ expert_setup.c, $Revision: 1.1 $ get_tapecopy_target.c, $Revision: 1.1 $ handle_interrupt.c, $Revision: 1.1 $ output_hex.c, $Revision: 1.1 $ pulse.c, $Revision: 1.1 $ release_device.c, $Revision: 1.1 $ remove_file.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/expert/scsi_lib: expert_mod.c, $Revision: 1.4 $ expert_main.c, $Revision: 1.2 $ call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ create_temp_file.c, $Revision: 1.1 $ decode_io_status.c, $Revision: 1.3 $ display_caution.c, $Revision: 1.1 $ display_continue.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_help_loc_id.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_describe.c, $Revision: 1.1 $ do_display_both.c, $Revision: 1.1 $ do_display_hex.c, $Revision: 1.1 $ do_display_interpreted.c, $Revision: 1.1 $ do_exit.c, $Revision: 1.1 $ do_general_help.c, $Revision: 1.1 $ do_info.c, $Revision: 1.4 $ do_logs.c, $Revision: 1.3 $ do_tests.c, $Revision: 1.2 $ do_utility.c, $Revision: 1.5 $ do_version_help.c, $Revision: 1.1 $ expert_setup.c, $Revision: 1.1 $ handle_interrupt.c, $Revision: 1.1 $ output_hex.c, $Revision: 1.1 $ release_device.c, $Revision: 1.2 $ remove_file.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/fw_update/ara_fw: ara_fw_mod.c, $Revision: 1.11 $ fw_update_setup.c, $Revision: 1.5 $ fw_update_main.c, $Revision: 1.12 $ do_exit.c, $Revision: 1.3 $ do_fw_update.c, $Revision: 1.13 $ do_lvm_help.c, $Revision: 1.4 $ do_general_help.c, $Revision: 1.2 $ do_info_help.c, $Revision: 1.2 $ do_version_help.c, $Revision: 1.2 $ do_get_controller.c, $Revision: 1.13.1.2 $ do_get_cont_fw_file.c, $Revision: 1.4 $ do_get_2gb_disk.c, $Revision: 1.12.1.2 $ do_get_2gb_fw_file.c, $Revision: 1.5 $ do_get_4gb_disk.c, $Revision: 1.13.1.2 $ do_get_4gb_fw_file.c, $Revision: 1.4 $ cleanup_and_exit.c, $Revision: 1.5 $ get_array_data.c, $Revision: 1.4 $ get_info_data.c, $Revision: 1.7 $ get_inquiry_data.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.5 $ handle_interrupt.c, $Revision: 1.2 $ issue_io.c, $Revision: 1.2 $ display_continue.c, $Revision: 1.2 $ display_help_loc_id.c, $Revision: 1.2 $ display_help_msg.c, $Revision: 1.2 $ display_caution.c, $Revision: 1.2 $ display_error.c, $Revision: 1.1 $ display_main.c, $Revision: 1.2 $ invoke_arraydsp.c, $Revision: 1.11 $ unwrap_file.c, $Revision: 1.5 $ /usr/sbin/stm/uut/bin/tools/fw_update/scsi_lib: fw_update_mod.c, $Revision: 1.6 $ call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.6 $ decode_io_status.c, $Revision: 1.3 $ display_caution.c, $Revision: 1.3 $ display_continue.c, $Revision: 1.2 $ display_help_loc_id.c, $Revision: 1.2 $ display_help_msg.c, $Revision: 1.2 $ display_main.c, $Revision: 1.2 $ do_exit.c, $Revision: 1.3 $ do_fw_update.c, $Revision: 1.6 $ do_general_help.c, $Revision: 1.3 $ do_select_file.c, $Revision: 1.3 $ do_version_help.c, $Revision: 1.2 $ fw_update_main.c, $Revision: 1.5 $ fw_update_setup.c, $Revision: 1.2 $ get_fw_update_file.c, $Revision: 1.7 $ handle_interrupt.c, $Revision: 1.2 $ download.c, $Revision: 1.3 $ send_to_device.c, $Revision: 1.4 $ open_fw_update_file.c, $Revision: 1.2 $ read_fw_update_file.c, $Revision: 1.2 $ release_device.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.7 $ setup_global_dev_info.c, $Revision: 1.5 $ validate_fw_update_file.c, $Revision: 1.5 $ /usr/sbin/stm/uut/bin/tools/fw_update/scsi_tape: fw_update_mod.c, $Revision: 1.5 $ call_scsi_dev_io.c, $Revision: 1.2 $ check_valid_dev.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.3 $ display_caution.c, $Revision: 1.1 $ display_continue.c, $Revision: 1.1 $ display_help_loc_id.c, $Revision: 1.1 $ display_help_msg.c, $Revision: 1.1 $ display_main.c, $Revision: 1.1 $ do_exit.c, $Revision: 1.2 $ do_fw_update.c, $Revision: 1.3 $ do_general_help.c, $Revision: 1.2 $ do_select_file.c, $Revision: 1.1 $ do_version_help.c, $Revision: 1.1 $ fw_update_main.c, $Revision: 1.2 $ fw_update_setup.c, $Revision: 1.2 $ get_fw_update_file.c, $Revision: 1.3 $ handle_interrupt.c, $Revision: 1.1 $ download.c, $Revision: 1.1 $ send_to_device.c, $Revision: 1.3 $ open_fw_update_file.c, $Revision: 1.1 $ read_fw_update_file.c, $Revision: 1.1 $ release_device.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.2 $ validate_fw_update_file.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/id/graphics_id: access_device.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.2 $ get_graphics_prod_num.c, $Revision: 1.7 $ get_id_data.c, $Revision: 1.2 $ graphics_id_main.c, $Revision: 1.2 $ log_msg.c, $Revision: 1.4 $ perform_identify.c, $Revision: 1.2 $ release_device.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.2 $ /usr/sbin/stm/uut/bin/tools/id/scsi_dev: cleanup_and_exit.c, $Revision: 1.2 $ get_id_data.c, $Revision: 1.2 $ get_product.c, $Revision: 1.10 $ get_qualifier.c, $Revision: 1.3 $ scsi_dev_main.c, $Revision: 1.3 $ perform_identify.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/id/scsi_arry: cleanup_and_exit.c, $Revision: 1.1 $ get_id_data.c, $Revision: 1.1 $ get_product.c, $Revision: 1.5 $ get_qualifier.c, $Revision: 1.2 $ scsi_arry_main.c, $Revision: 1.1 $ perform_identify.c, $Revision: 1.1 $ setup_global_dev_info.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/tools/id/pa_module: cleanup_and_exit.c, $Revision: 1.2 $ get_id_data.c, $Revision: 1.3 $ get_product.c, $Revision: 1.18.1.3 $ get_qualifier.c, $Revision: 1.4 $ pa_module_main.c, $Revision: 1.3 $ perform_identify.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/id/hpib_dev: cleanup_and_exit.c, $Revision: 1.2 $ get_id_data.c, $Revision: 1.2 $ get_product.c, $Revision: 1.6 $ get_qualifier.c, $Revision: 1.3 $ hpib_dev_main.c, $Revision: 1.3 $ perform_identify.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/id/cio_card: cio_card_main.c, $Revision: 1.3 $ cleanup_and_exit.c, $Revision: 1.2 $ get_id_data.c, $Revision: 1.2 $ get_product.c, $Revision: 1.6 $ get_qualifier.c, $Revision: 1.3 $ perform_identify.c, $Revision: 1.3 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/info/ara_info: ara_info_main.c, $Revision: 1.7 $ cleanup_and_exit.c, $Revision: 1.4 $ get_and_log_info_data.c, $Revision: 1.12 $ get_info_data.c, $Revision: 1.9 $ get_inquiry_data.c, $Revision: 1.7 $ perform_info.c, $Revision: 1.6 $ setup_device_access.c, $Revision: 1.11 $ invoke_arraydsp.c, $Revision: 1.11 $ /usr/sbin/stm/uut/bin/tools/info/graphics: information_mod.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ get_and_log_info_data.c, $Revision: 1.5 $ get_info_data.c, $Revision: 1.8 $ get_graphics_prod_num.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.2 $ setup_device_access.c, $Revision: 1.1 $ setup_global_dev_info.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/tools/info/scsi_3480: tape_info.c, $Revision: 1.3 $ access_device.c, $Revision: 1.5 $ cleanup_and_exit.c, $Revision: 1.3 $ get_and_log_info_data.c, $Revision: 1.5 $ get_info_data_3480.c, $Revision: 1.6 $ raw_to_digit.c, $Revision: 1.4 $ call_scsi_dev_io.c, $Revision: 1.7 $ do_inquiry_3480.c, $Revision: 1.8 $ get_capacity_3480.c, $Revision: 1.5 $ get_drive_status.c, $Revision: 1.6 $ decode_io_status.c, $Revision: 1.3 $ get_compress_page.c, $Revision: 1.4 $ perform_info.c, $Revision: 1.3 $ release_device.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.4 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/info/scsi_8mm: tape_info.c, $Revision: 1.7 $ access_device.c, $Revision: 1.7 $ cleanup_and_exit.c, $Revision: 1.5 $ get_and_log_info_data.c, $Revision: 1.8 $ get_info_data_8mm.c, $Revision: 1.9 $ raw_to_digit.c, $Revision: 1.6 $ do_inquiry.c, $Revision: 1.8 $ call_scsi_dev_io.c, $Revision: 1.10 $ get_fw_rev_8mm.c, $Revision: 1.6 $ get_capacity_8mm.c, $Revision: 1.12 $ get_load_count_8mm.c, $Revision: 1.6 $ get_drive_status.c, $Revision: 1.6 $ decode_io_status.c, $Revision: 1.4 $ get_wr_err_count_8mm.c, $Revision: 1.4 $ get_rd_err_count_8mm.c, $Revision: 1.4 $ get_compress_page.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.4 $ release_device.c, $Revision: 1.4 $ setup_device_access.c, $Revision: 1.5 $ setup_global_dev_info.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/info/scsi_dds: tape_info.c, $Revision: 1.7 $ access_device.c, $Revision: 1.12 $ cleanup_and_exit.c, $Revision: 1.10 $ get_and_log_info_data.c, $Revision: 1.12 $ get_info_data.c, $Revision: 1.12 $ raw_to_digit.c, $Revision: 1.8 $ do_inquiry.c, $Revision: 1.17 $ do_page_view.c, $Revision: 1.3 $ call_scsi_dev_io.c, $Revision: 1.14 $ get_fw_rev.c, $Revision: 1.10 $ get_servo_rev.c, $Revision: 1.11 $ get_capacity.c, $Revision: 1.11 $ get_capacity_8mm.c, $Revision: 1.5 $ get_load_count.c, $Revision: 1.12 $ get_drive_status.c, $Revision: 1.14 $ decode_io_status.c, $Revision: 1.7 $ get_wr_err_count.c, $Revision: 1.11 $ get_rd_err_count.c, $Revision: 1.11 $ get_compress_page.c, $Revision: 1.7 $ perform_info.c, $Revision: 1.7 $ release_device.c, $Revision: 1.5 $ setup_device_access.c, $Revision: 1.9 $ setup_global_dev_info.c, $Revision: 1.8 $ /usr/sbin/stm/uut/bin/tools/info/scsi_disk: scsi_disk_info_main.c, $Revision: 1.2 $ cleanup_and_exit.c, $Revision: 1.4 $ get_and_log_info_data.c, $Revision: 1.5 $ get_info_data.c, $Revision: 1.7 $ get_inquiry_data.c, $Revision: 1.10 $ get_capacity_data.c, $Revision: 1.9 $ get_log_data.c, $Revision: 1.10 $ perform_info.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.4 $ /usr/sbin/stm/uut/bin/tools/info/scsi_qic: tape_info.c, $Revision: 1.3 $ access_device.c, $Revision: 1.6 $ cleanup_and_exit.c, $Revision: 1.4 $ get_and_log_info_data.c, $Revision: 1.7 $ get_info_data_qic.c, $Revision: 1.5 $ raw_to_digit.c, $Revision: 1.4 $ call_scsi_dev_io.c, $Revision: 1.12 $ do_inquiry_qic.c, $Revision: 1.8 $ get_serial_num_qic.c, $Revision: 1.7 $ get_drive_status.c, $Revision: 1.8 $ decode_io_status.c, $Revision: 1.5 $ get_compress_page.c, $Revision: 1.3 $ perform_info.c, $Revision: 1.4 $ release_device.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.4 $ setup_global_dev_info.c, $Revision: 1.3 $ /usr/sbin/stm/uut/bin/tools/info/srm_disk: srm_disk_info_main.c, $Revision: 1.1 $ cleanup_and_exit.c, $Revision: 1.1 $ get_and_log_info_data.c, $Revision: 1.1 $ get_info_data.c, $Revision: 1.1 $ get_inquiry_data.c, $Revision: 1.1 $ get_capacity_data.c, $Revision: 1.1 $ get_log_data.c, $Revision: 1.1 $ perform_info.c, $Revision: 1.1 $ setup_device_access.c, $Revision: 1.1 $ /usr/sbin/stm/uut/bin/tools/verify/disk: verify_mod.c, $Revision: 1.6 $ access_device.c, $Revision: 1.10 $ cleanup_and_exit.c, $Revision: 1.3 $ perform_verify.c, $Revision: 1.13 $ query_user.c, $Revision: 1.2 $ verify_device.c, $Revision: 1.7 $ verify_disk.c, $Revision: 1.15 $ log_msg.c, $Revision: 1.6 $ diaglog_user.c, $Revision: 1.3 $ setup_device_access.c, $Revision: 1.12 $ init_tool_control.c, $Revision: 1.2 $ check_and_report_progress.c, $Revision: 1.2 $ check_for_done.c, $Revision: 1.2 $ setup_global_dev_info.c, $Revision: 1.12 $ /usr/sbin/stm/ui/icons/atm_c.50.p: None /usr/sbin/stm/uut/lib/tlscsidev.sl: tlscsidev_lock.c, $Revision: 1.4 $ tlscsidev_io.c, $Revision: 1.6 $ tlscsidev_io_diag0.c, $Revision: 1.7 $ tlscsidev_io_sctl.c, $Revision: 1.8 $ tlscsidev_reset_driver.c, $Revision: 1.4 $ tlscsidev_unlock.c, $Revision: 1.4 $ tlscsidev_end.c, $Revision: 1.4 $ tlscsidev_init.c, $Revision: 1.5 $ tlscsidev_gen.c, $Revision: 1.8 $ tlscsidev_get_sti_msg.c, $Revision: 1.4 $ tlscsidev_disk_sense_decode.c, $Revision: 1.4 $ tlscsidev_tape_sense_decode.c, $Revision: 1.3 $ /usr/sbin/stm/uut/lib/tlgraphics.sl: tl_get_graphics_sti_rom_info.c, $Revision: 1.4 $ tl_get_graphics_crt_id.c, $Revision: 1.1 $ tl_log_msg.c, $Revision: 1.3 $ /var/stm/config/sys/diagmond.cfg: None /var/stm/data/id_mod_xref: None /var/stm/data/prod_op_xref: None cksum(1) Output: 3573132911 851968 /usr/lib/libdiag.sl 4089641637 1176 /usr/sbin/diag/DIAGLIST 3963941894 45360 /usr/sbin/diag/DUIDIR 2501187266 24074 /usr/sbin/diag/IODEVACC 846251326 12461 /usr/sbin/diag/CMEML000 3396013860 92191 /usr/sbin/diag/CSERV000 668199191 25973 /usr/sbin/diag/C0001000 2423682925 76665 /usr/sbin/diag/C0003000 4054881880 98177 /usr/sbin/diag/C0005000 1459462979 142060 /usr/sbin/diag/C0006000 2275765416 60268 /usr/sbin/diag/C0008000 4202988575 175814 /usr/sbin/diag/C0012000 1398929149 62630 /usr/sbin/diag/C0017000 339935499 1406544 /usr/sbin/diag/DASSDIAG 947959728 446464 /usr/sbin/diag/DUI 1262674807 614400 /usr/sbin/diag/HARRAY 1141078590 71880 /usr/sbin/diag/LAYOUTF 269379208 56133 /usr/sbin/diag/LAYMSG 2509261638 1529424 /usr/sbin/diag/LOGTOOL 309543078 241664 /usr/sbin/diag/MEMDIAG 139923192 110592 /usr/sbin/diag/MEMLOGP 722782513 446464 /usr/sbin/diag/SARRAY 3495981499 389120 /usr/sbin/diag/SCSIDDS 1208852176 303104 /usr/sbin/diag/SCSIDSK2 535139667 233472 /usr/sbin/diag/SYSMAP 4254438753 61440 /usr/sbin/suplicen 2712364400 66049 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/sys/ diagmond.cat 844502567 112748 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ syslib/libdiagms.cat 49624524 35032 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tool_lib/tlscsidev.cat 1308922389 5081 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tool_lib/tlgraphics.cat 1512390251 35972 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/diagnose/diag_dds.cat 831502763 14992 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ diagnose/diag_dlt.cat 3084604709 40261 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/diagnose/atmd.cat 2465839416 23321 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/exercise/cpu.cat 560170740 44532 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_ex.cat 149707147 11971 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exc00.ht 656533386 3088 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exc.hv 342015330 1034 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exc.hvk 4059683741 15203 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/ara_exm00.ht 167982085 3833 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exm.hv 429747423 1610 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exm.hvk 828877050 14200 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exx00.ht 362311214 3529 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exx.hv 3111898797 1408 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/ara_exx.hvk 3081994251 71511 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_dds.cat 4226516710 15966 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_ddsc00.ht 606105989 4431 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_ddsc.hv 2820968767 2826 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_ddsc.hvk 1511430786 16032 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_ddsm00.ht 2738519003 4288 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_ddsm.hv 1875242259 2953 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_ddsm.hvk 2897771177 18189 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_ddsx00.ht 3027075432 4518 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_ddsx.hv 277712104 3197 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_ddsx.hvk 731175667 42611 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dlt.cat 777977932 14080 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltc00.ht 525924475 4281 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltc.hv 2450452191 2560 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltc.hvk 871536423 14301 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltm00.ht 847204652 4149 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltm.hv 96308929 2870 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltm.hvk 3087355416 16325 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_dltx00.ht 4190794672 4388 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltx.hv 3170087609 3012 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_dltx.hvk 2155383777 38823 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_lib.cat 206446223 22305 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libc00.ht 2097480125 5299 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libc.hv 1207104668 2340 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libc.hvk 1717223088 22258 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_libm00.ht 4099083963 5235 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libm.hv 2401928869 2302 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libm.hvk 1399137560 23851 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/expert/scsi_libx00.ht 132943620 5597 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libx.hv 346859854 2480 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ expert/scsi_libx.hvk 4028791950 19167 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/ara_fw.cat 202516926 10877 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwc00.ht 2085066336 2794 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwc.hv 1134858129 959 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwc.hvk 202516926 10877 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwm00.ht 2601660555 2794 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwm.hv 1134858129 959 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwm.hvk 202516926 10877 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwx00.ht 1206361007 2794 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwx.hv 1134858129 959 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/ara_fwx.hvk 3643212566 25570 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_lib.cat 1751120290 11874 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_libc00.ht 54093011 2408 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libc.hv 4212174212 1000 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libc.hvk 1482788829 13450 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_libm00.ht 1060368392 2827 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libm.hv 1895974861 1113 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libm.hvk 873450707 10172 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libx00.ht 1318469659 1991 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libx.hv 3338300896 1050 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_libx.hvk 2873955575 21839 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_tape.cat 2074910202 11901 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_tapec00.ht 2825881803 2429 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_tapec.hv 4212174212 1000 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_tapec.hvk 2675333090 13438 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_tapem00.ht 33343345 2851 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_tapem.hv 1895974861 1113 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_tapem.hvk 4265283360 10164 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/fw_update/scsi_tapex00.ht 3578467462 2007 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_tapex.hv 3338300896 1050 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ fw_update/scsi_tapex.hvk 2778168887 1768 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ id/scsi_dev.cat 64642659 2262 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ id/scsi_arry.cat 2269806416 1655 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ id/hpib_dev.cat 893696931 1706 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ id/cio_card.cat 898698557 3767 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ info/ara_info.cat 696386876 2264 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ info/graphics.cat 3885307532 26667 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/info/scsi_3480.cat 3782875526 26736 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/info/scsi_8mm.cat 4137459652 27491 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/info/scsi_dds.cat 2586035080 6835 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ info/scsi_disk.cat 131412894 27474 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ info/scsi_qic.cat 4148195446 6434 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/tools/ info/srm_disk.cat 2726256682 23612 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ tools/verify/disk.cat 2769847059 50035 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/ libdiagum.cat 682800205 23278 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/ libdiagcm.cat 1293223056 104785 /usr/sbin/stm/catalog/C/HP-UX_B.10.10/ui/ stm.cat 4187516515 4133 /usr/lib/X11/app-defaults/XStm 4190686375 126976 /usr/sbin/stm/lib/libdiagcm.sl 976529175 163840 /usr/sbin/stm/lib/libdiagms.sl 1496611714 200704 /usr/sbin/stm/lib/libdiagpl.sl 516933995 131072 /usr/sbin/stm/lib/libdiagud.sl 74097741 196608 /usr/sbin/stm/lib/libdiagum.sl 1858128805 28672 /usr/sbin/stm/lib/libuicom.sl 4125761171 299008 /usr/sbin/stm/ui/bin/stm 2779195294 126976 /usr/sbin/stm/uut/bin/sys/diagmond 143591834 49152 /usr/sbin/stm/uut/bin/tools/diagnose/ diag_dds 3270991824 36864 /usr/sbin/stm/uut/bin/tools/diagnose/ diag_dlt 2382011739 53248 /usr/sbin/stm/uut/bin/tools/diagnose/atmd 735549589 46137 /usr/sbin/stm/uut/bin/tools/exercise/ devinfo.3d 254587452 65536 /usr/sbin/stm/uut/bin/tools/exercise/cpu 2357059586 53248 /usr/sbin/stm/uut/bin/tools/exercise/disk 2787733957 40960 /usr/sbin/stm/uut/bin/tools/exercise/memory 2420735932 86016 /usr/sbin/stm/uut/bin/tools/expert/ara_ex 3246713509 94208 /usr/sbin/stm/uut/bin/tools/expert/scsi_dds 3900284935 73728 /usr/sbin/stm/uut/bin/tools/expert/scsi_dlt 3952710936 102400 /usr/sbin/stm/uut/bin/tools/expert/ scsi_lib 4116414969 53248 /usr/sbin/stm/uut/bin/tools/fw_update/ ara_fw 2262651219 45056 /usr/sbin/stm/uut/bin/tools/fw_update/ scsi_lib 3627352054 49152 /usr/sbin/stm/uut/bin/tools/fw_update/ scsi_tape 962637216 36864 /usr/sbin/stm/uut/bin/tools/id/graphics_id 1622765849 24576 /usr/sbin/stm/uut/bin/tools/id/scsi_dev 3086362934 24576 /usr/sbin/stm/uut/bin/tools/id/scsi_arry 3777437273 28672 /usr/sbin/stm/uut/bin/tools/id/pa_module 909741231 24576 /usr/sbin/stm/uut/bin/tools/id/hpib_dev 453090677 24576 /usr/sbin/stm/uut/bin/tools/id/cio_card 4210528149 28672 /usr/sbin/stm/uut/bin/tools/info/ara_info 2376800499 36864 /usr/sbin/stm/uut/bin/tools/info/graphics 325806904 45056 /usr/sbin/stm/uut/bin/tools/info/scsi_3480 1758713025 53248 /usr/sbin/stm/uut/bin/tools/info/scsi_8mm 2392414078 65536 /usr/sbin/stm/uut/bin/tools/info/scsi_dds 328525742 32768 /usr/sbin/stm/uut/bin/tools/info/scsi_disk 1703900150 45056 /usr/sbin/stm/uut/bin/tools/info/scsi_qic 1162133287 32768 /usr/sbin/stm/uut/bin/tools/info/srm_disk 1441270233 61440 /usr/sbin/stm/uut/bin/tools/verify/disk 147345835 2282 /usr/sbin/stm/ui/icons/atm_c.50.p 2350629619 36864 /usr/sbin/stm/uut/lib/tlscsidev.sl 1334626860 12288 /usr/sbin/stm/uut/lib/tlgraphics.sl 563734166 4741 /var/stm/config/sys/diagmond.cfg 376459001 1683 /var/stm/data/id_mod_xref 805174816 13837 /var/stm/data/prod_op_xref Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: PHSS_6796 PHSS_7071 Equivalent Patches: None Patch Package Size: 11690 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHSS_7585 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHSS_7585.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHSS_7585.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHSS_7585. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHSS_7585.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHSS_7585.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: None