Patch Name: PHNE_9880 Patch Description: s700 10.09 [Lev36] 100VG-AnyLAN cumulative patch Creation Date: 97/01/29 Post Date: 97/02/10 Hardware Platforms - OS Releases: s700: 10.09 Products: EISA 100VG-AnyLAN/9000(J2655AA_APS) B.10.00.02 Filesets: 100VG-EISA-KRN.100VG-KRN Automatic Reboot?: Yes Status: General Release Critical: Yes PHNE_9880: PANIC 100vg Anylan panics when card is disconnected PHNE_7839: PANIC This patch must be installed before the installation of original 100VG-AnyLAN depot. See "Special Installation Instructions". Path Name: /hp-ux_patches/s700/10.X/PHNE_9880 Symptoms: PHNE_9880: 100vg Anylan panics when card is disconnected PHNE_7839: * System panic when install 100VG-AnyLAN ISU ( See special Installation Instruction) Defect Description: PHNE_9880: 100vg Anylan panics when card is disconnected PHNE_7839: * System panic when install 100VG-AnyLAN ISU ( See special Installation Instruction) SR: 1653180836 Patch Files: /usr/conf/lib/lib100vg.a what(1) Output: /usr/conf/lib/lib100vg.a: kern/sio/vgal0.c, hpuxsysio, hpux_mlp, mlp13 $Date: 97/01/24 14:35:38 $Revision: 1.2.1.2 PATCH_1 0.09 (PHNE_9880) vgal0.h $Revision: 1.13 $ $Date: 96/10/28 13:40:06 $ vg al0.c $Revision: 1.64 $ $Date: 96/10/28 12:1 6:20 $ FILESET 100VG: lib 100vg: Ver sion: A.10.10 PHNE_6940 cksum(1) Output: 1039642672 42076 /usr/conf/lib/lib100vg.a Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: The "Special Installation Instruction" section contains information on how to install this patch. Supersedes: PHNE_7839 Equivalent Patches: PHNE_9881: s800: 10.09 PHNE_9882: s700: 10.16 PHNE_9883: s800: 10.16 Patch Package Size: 100 Kbytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHNE_9880 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHNE_9880.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHNE_9880.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHNE_9880. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHNE_9880.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHNE_9880.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: WARNING!! If you have already installed patch PHNE_7839 on your system then follow the standard installation instruction to install this patch. If you HAVE NOT installed patch PHNE_7839 on your system then follow the steps below to install this patch. Step 1. Download the PHNE_9880.depot to /tmp. Step 2. If loading from cdrom, mount the CD on /mnt: (Assume the disk device is c0t2d0) #mkdir /mnt #mount -t cdfs -S syslo /dev/dsk/c0t2d0 /mnt Step 3. Install the original 100VG software from tape or cdrom. - Run swinstall - Make the Source Depot Path /mnt - Highlight the 100VG-AnyLAN software - Mark for Install - Choose Install from the Actions menu This process will install the software and rebuild the kernel. When install is finished, click the "Done" button. System will rebuild the kernel and automatically reboot. DO NOT LET THE SYSTEM REBOOT FROM THE NEW KERNEL. Hit "Esc" key to stop at IPL before system comes up. You must be patient enough to keep pressing the "Esc" key to stop the reboot and not let the system boot from the new kernel. Step 4. Boot from the previous kernel. - boot path and interact with IPL Menu> boot scsi.2.0 isl Some machine will ask if you want interact with IPL, Answer "Y". ISL>hpux /stand/vmunix.prev This will boot the previous kernel. Step 5. When system comes up, run swinstall to install /tmp/PHNE_9880.depot. Step 6. Refer EISA 100VG-AnyLAN/9000 Release Note for further installation information like hardware configuration, etc.