Switch Mode Power Supply Testing Report Test Program Name : XXXXXXXXXXXXXXXXXXXX Serial No : Testing Data System Time : 2014/04/04 09:46:51 AM Model Name : 1500AXi Titanium Elapsed Time : 00:33:20 LOT Number : Environment : Order Number : Inspector : sang Customer : Test Result : PASS ================================================================================ (Pre Test seq.1) : TTL & Relay PreSetup((Switch off)) Delay Time (ms) = 200 TTL State 1 = 0000 TTL State 2 = 0000 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ (Pre Test seq.2) : Dynamic Load Value PreSetup Load Loading-1 Loading-2 Duration-1 Duration-2 Rise Rate Fall Rate Name (A) (A) (ms) (ms) (A/us) (A/us) ------------- --------- --------- ---------- ---------- --------- --------- 5V 0.000 14.030 10.000 10.000 1.0000 1.0000 3.3V 0.000 14.030 10.000 10.000 1.0000 1.0000 -12V 0.000 0.350 10.000 10.000 0.8000 0.8000 5VSB 0.000 1.540 10.000 10.000 0.8000 0.8000 12V6 125.000 73.650 10.000 10.000 1.0000 1.0000 ================================================================================ (Pre Test seq.3) : System Setup Vin (V)= 90.00 Maximum Input Voltage (V)= 0.00 Fin (Hz)= 60.00 Current Limit(A)= 30.00 Von Action Type(1:Latch 0:Nonlatch) = 1 Load Mode (0:CC, 1:CR, 2:CV) Load Load ILoad VLoad Von Rise Rate Fall Rate Name Mode Max(A) Max(V) (V) (A/us) (A/us) ------------- ----- ------ ------ ------ --------- --------- 5V 0 60.00 80.00 0.30 0.1000 0.1000 3.3V 0 60.00 80.00 0.30 0.1000 0.1000 -12V 0 20.00 80.00 -0.30 0.1000 0.1000 5VSB 0 20.00 80.00 0.30 0.1000 0.1000 12V6 0 300.00 80.00 0.30 0.1000 0.1000 ================================================================================ STEP.1(UUT Test seq.1) : Inrush Current Test(115VAC 60Hz) ---- (5'563) ---- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 UUT Off Time (s)= 5.00 Turn On Phase = 90.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 9.530 3.3V 9.530 -12V 0.350 5VSB 1.540 12V6 54.900 Max Min Reading -------------------- --------- --------- --------- Inrush Current (A) 65.00 ******* 39.33 ================================================================================ STEP.2(UUT Test seq.2) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* 0.002 5VSB 5.150 4.850 5.105 ******* ******* 0.046 12V6 ******* ******* 0.055 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.51 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 47.02 ================================================================================ STEP.3(UUT Test seq.3) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.002 -12V ******* ******* -0.005 ******* ******* 0.002 5VSB 5.150 4.850 5.105 ******* ******* 0.046 12V6 ******* ******* 0.072 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.47 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 50.86 ================================================================================ STEP.4(UUT Test seq.4) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* 0.001 5VSB 5.150 4.850 5.105 ******* ******* 0.046 12V6 ******* ******* 0.080 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.46 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 51.92 ================================================================================ STEP.5(UUT Test seq.5) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* 0.001 5VSB 5.150 4.850 5.105 ******* ******* 0.046 12V6 ******* ******* 0.080 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.45 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 51.86 ================================================================================ STEP.6(UUT Test seq.6) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.002 -12V ******* ******* -0.005 ******* ******* 0.001 5VSB 5.150 4.850 5.105 ******* ******* 0.046 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.45 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 53.09 ================================================================================ STEP.7(UUT Test seq.7) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* 0.001 5VSB 5.150 4.850 5.102 ******* ******* 0.046 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.45 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 53.34 ================================================================================ STEP.8(UUT Test seq.8) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* 0.002 5VSB 5.150 4.850 5.102 ******* ******* 0.046 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.45 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 53.52 ================================================================================ STEP.9(UUT Test seq.9) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* 0.001 5VSB 5.150 4.850 5.102 ******* ******* 0.046 12V6 ******* ******* 0.085 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.45 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 53.70 ================================================================================ STEP.10(UUT Test seq.10) : Power Efficiency Test(+5Vsb 45mA Warm Up) ---- ( PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.002 -12V ******* ******* -0.005 ******* ******* 0.001 5VSB 5.150 4.850 5.102 ******* ******* 0.046 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.44 Pout (W) ******* ******* 0.24 Eff (%) ****** ****** 53.74 ================================================================================ STEP.11(UUT Test seq.11) : Power Efficiency Test(+5Vsb 45mA <0.45W EFF>50%) PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.045 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* 0.001 5VSB 5.150 4.850 5.102 ******* ******* 0.046 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) 0.45 ******* 0.43 Pout (W) ******* ******* 0.24 Eff (%) ****** 50.00 55.01 ================================================================================ STEP.12(UUT Test seq.12) : Power Efficiency Test(+5Vsb 100mA EFF>55%) ---- PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.100 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* 0.001 5VSB 5.150 4.850 5.102 ******* ******* 0.101 12V6 ******* ******* 0.082 ******* ******* 0.028 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 0.78 Pout (W) ******* ******* 0.52 Eff (%) ****** 55.00 66.52 ================================================================================ STEP.13(UUT Test seq.13) : Power Efficiency Test(+5Vsb 250mA EFF>65%) ---- PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.250 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* 0.001 5VSB 5.150 4.850 5.097 ******* ******* 0.251 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 1.72 Pout (W) ******* ******* 1.28 Eff (%) ****** 65.00 74.53 ================================================================================ STEP.14(UUT Test seq.14) : Power Efficiency Test(+5Vsb 1A EFF>75%) ---- (30 PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 1.000 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.002 -12V ******* ******* -0.005 ******* ******* 0.002 5VSB 5.150 4.850 5.070 ******* ******* 1.002 12V6 ******* ******* 0.085 ******* ******* 0.028 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 6.53 Pout (W) ******* ******* 5.08 Eff (%) ****** 75.00 77.78 ================================================================================ STEP.15(UUT Test seq.15) : Power Efficiency Test(+5Vsb 3.5A Eff>* 115Vac) - PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 3.500 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* 0.001 5VSB 5.150 4.850 4.985 ******* ******* 3.503 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 22.30 Pout (W) ******* ******* 17.46 Eff (%) ****** ****** 78.31 ================================================================================ STEP.16(UUT Test seq.16) : Power Efficiency Test(+5Vsb 3.5A Eff>* 230Vac) - PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 30000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 3.500 12V6 0.000 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* 0.002 5VSB 5.150 4.850 4.988 ******* ******* 3.503 12V6 ******* ******* 0.082 ******* ******* 0.038 Max Min Reading ------------- --------- --------- --------- Pin (W) ******* ******* 21.83 Pout (W) ******* ******* 17.47 Eff (%) ****** ****** 80.02 ================================================================================ STEP.17(UUT Test seq.17) : Voltage Regulation Test(+5Vsb 0A 90-264Vac (Chec PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 15000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* -0.002 5VSB 5.150 4.850 5.105 5.150 4.850 5.108 12V6 ******* ******* 0.082 ******* ******* 0.082 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.002 5VSB ******* ******* 0.002 12V6 ******* ******* 0.000 ================================================================================ STEP.18(UUT Test seq.18) : Voltage Regulation Test(+5Vsb 1.75A 90-264Vac) - PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 1.750 1.750 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.002 ******* ******* -0.005 5VSB 5.150 4.850 5.043 5.150 4.850 5.045 12V6 ******* ******* 0.082 ******* ******* 0.082 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.002 5VSB ******* ******* 0.002 12V6 ******* ******* 0.000 ================================================================================ STEP.19(UUT Test seq.19) : Voltage Regulation Test(+5Vsb 3.5A 90-264Vac) -- PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 3.500 3.500 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V ******* ******* 0.000 ******* ******* 0.000 3.3V ******* ******* 0.000 ******* ******* 0.000 -12V ******* ******* -0.005 ******* ******* -0.002 5VSB 5.150 4.850 4.988 5.150 4.850 4.985 12V6 ******* ******* 0.082 ******* ******* 0.082 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.002 5VSB ******* ******* -0.002 12V6 ******* ******* 0.000 ================================================================================ STEP.20(UUT Test seq.20) : Noise Test(+5Vsb 0A 90Vac) ---- (6'016) -------- PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 ******* ******* 0.0015 3.3V 0.000 ******* ******* 0.0011 -12V 0.000 ******* ******* 0.0049 5VSB 0.000 0.040 ******* 0.0162 12V6 0.000 ******* ******* 0.0015 ================================================================================ STEP.21(UUT Test seq.21) : Noise Test(+5Vsb 0A 264Vac) ---- (6'000) ------- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 ******* ******* 0.0008 3.3V 0.000 ******* ******* 0.0006 -12V 0.000 ******* ******* 0.0036 5VSB 0.000 0.040 ******* 0.0157 12V6 0.000 ******* ******* 0.0004 ================================================================================ STEP.22(UUT Test seq.22) : Noise Test(+5Vsb 1.75A 90Vac) ---- (6'000) ----- PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 ******* ******* 0.0006 3.3V 0.000 ******* ******* 0.0006 -12V 0.000 ******* ******* 0.0037 5VSB 1.750 0.040 ******* 0.0030 12V6 0.000 ******* ******* 0.0005 ================================================================================ STEP.23(UUT Test seq.23) : Noise Test(+5Vsb 1.75A 264Vac) ---- (6'000) ---- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 ******* ******* 0.0006 3.3V 0.000 ******* ******* 0.0004 -12V 0.000 ******* ******* 0.0037 5VSB 1.750 0.040 ******* 0.0029 12V6 0.000 ******* ******* 0.0004 ================================================================================ STEP.24(UUT Test seq.24) : Noise Test(+5Vsb 3.5A 90Vac) ---- (5'968) ------ PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 ******* ******* 0.0006 3.3V 0.000 ******* ******* 0.0005 -12V 0.000 ******* ******* 0.0036 5VSB 3.500 0.040 ******* 0.0038 12V6 0.000 ******* ******* 0.0004 ================================================================================ STEP.25(UUT Test seq.25) : Noise Test(+5Vsb 3.5A 264Vac) ---- (6'000) ----- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 ******* ******* 0.0007 3.3V 0.000 ******* ******* 0.0008 -12V 0.000 ******* ******* 0.0039 5VSB 3.500 0.040 ******* 0.0042 12V6 0.000 ******* ******* 0.0005 ================================================================================ STEP.26(UUT Test seq.26) : Over Load Protection Test(+5Vsb 90Vac) ---- (9'3 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 4.750 OLP Test Channel= 4 UUT Type = 0 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 3.500 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 3.500 10.000 0.100 3.500 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 10.000 3.500 5.000 ================================================================================ STEP.27(UUT Test seq.27) : Over Load Protection Test(+5Vsb 264Vac) ---- (12 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 4.750 OLP Test Channel= 4 UUT Type = 0 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 3.500 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 3.500 10.000 0.100 3.500 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 10.000 3.500 6.500 ================================================================================ STEP.28(UUT Test seq.28) : Turn On & Sequence Test(+5Vsb Rise Time 90Vac) - PASS Vin (V)= 90.00 Fin (Hz)= 47.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 0.000 5 6 0.000 4.750 3.3V 0.000 5 6 0.000 3.140 -12V 0.000 5 6 0.000 -11.400 5VSB 3.500 5 6 0.500 4.750 12V6 0.000 5 6 0.000 11.400 Load Ton Ton Ton Name Max Min (ms) ------------- -------- -------- --------- 5V ******** ******** --------- 3.3V ******** ******** --------- -12V ******** ******** --------- 5VSB 25.00 ******** 20.07 12V6 ******** ******** --------- Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** --------- 0 ******** ******** --------- 0 ******** ******** --------- 0 ******** ******** 20.07 0 ******** ******** --------- Ref Ton From which Load = 0 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** 20.07 Tdl (ms) ******** ******** 20.07 Tdls (ms) ******** 0.00 ================================================================================ STEP.29(UUT Test seq.29) : Turn On & Sequence Test(+5Vsb Rise Time 264Vac) PASS Vin (V)= 264.00 Fin (Hz)= 63.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 0.000 5 6 0.000 4.750 3.3V 0.000 5 6 0.000 3.140 -12V 0.000 5 6 0.000 -11.400 5VSB 3.500 5 6 0.500 4.750 12V6 0.000 5 6 0.000 11.400 Load Ton Ton Ton Name Max Min (ms) ------------- -------- -------- --------- 5V ******** ******** --------- 3.3V ******** ******** --------- -12V ******** ******** --------- 5VSB 25.00 ******** 16.98 12V6 ******** ******** --------- Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** --------- 0 ******** ******** --------- 0 ******** ******** --------- 0 ******** ******** 16.98 0 ******** ******** --------- Ref Ton From which Load = 0 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** 16.98 Tdl (ms) ******** ******** 16.98 Tdls (ms) ******** 0.00 ================================================================================ STEP.30(UUT Test seq.30) : TTL & Relay Setup((Switch on)) ---- (3'813) ---- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.31(UUT Test seq.31) : Sync Dynamic Test(Audible Noise Test - Graphic C PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 10000.00 Duration-1 (ms)= 0.125 Duration-2 (ms)= 0.125 Test Channel = 5 Result Message: Success Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 9.530 0.000 1.0000 1.0000 3.3V 9.530 0.000 1.0000 1.0000 -12V 0.350 0.000 0.1000 0.1000 5VSB 1.540 0.000 0.1000 0.1000 12V6 54.900 125.000 1.0000 1.0000 Max Min Reading(High) Reading(Low) --------- --------- --------- -------------- -------------- Vpp (V) ********* 0.000 Vpk (V) ********* ********* 0.000 0.000 ================================================================================ STEP.32(UUT Test seq.32) : Turn On & Sequence Test(Main Outputs Rise Time 9 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 18.250 5 6 0.500 4.750 3.3V 18.250 5 6 0.330 3.140 -12V 0.670 5 6 -1.200 -11.400 5VSB 2.950 5 6 0.500 4.750 12V6 77.150 5 6 1.200 11.400 Load Ton Ton Ton Name Max Min (ms) ------------- -------- -------- --------- 5V 20.00 ******** 8.85 3.3V 20.00 ******** 5.10 -12V 20.00 ******** 5.80 5VSB ******** ******** 22.25 12V6 20.00 ******** 5.70 Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** 8.85 0 ******** ******** 5.10 0 ******** ******** 5.80 0 ******** ******** 22.25 0 ******** ******** 5.70 Ref Ton From which Load = 5 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** -0.60 Tdl (ms) ******** ******** 16.55 Tdls (ms) ******** 17.15 ================================================================================ STEP.33(UUT Test seq.33) : Static Test ---- (5'187) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.303 ******* ******* 3.808 -12V -12.360 -11.640 -12.033 ******* ******* 0.142 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 11.997 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.20 ================================================================================ STEP.34(UUT Test seq.34) : Turn On & Sequence Test(Main Outputs Rise Time 2 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 19.060 5 6 0.500 4.750 3.3V 19.060 5 6 0.330 3.140 -12V 0.700 5 6 -1.200 -11.400 5VSB 3.080 5 6 0.500 4.750 12V6 109.850 5 6 1.200 11.400 Load Ton Ton Ton Name Max Min (ms) ------------- -------- -------- --------- 5V 20.00 ******** 8.99 3.3V 20.00 ******** 5.10 -12V 20.00 ******** 5.78 5VSB ******** ******** 18.22 12V6 20.00 ******** 6.74 Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** 8.99 0 ******** ******** 5.10 0 ******** ******** 5.78 0 ******** ******** 18.22 0 ******** ******** 6.74 Ref Ton From which Load = 5 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** -1.64 Tdl (ms) ******** ******** 11.48 Tdls (ms) ******** 13.12 ================================================================================ STEP.35(UUT Test seq.35) : Turn On & Sequence Test(Power Good Delay Timing PASS Vin (V)= 90.00 Fin (Hz)= 47.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 18.250 5 2 4.750 4.750 3.3V 18.250 5 2 3.140 3.140 -12V 0.670 5 2 -10.800 -10.800 5VSB 2.950 5 2 4.750 4.750 12V6 77.150 5 2 11.400 11.400 Load Ton Ton Ton Name Max Min (ms) ------------- -------- -------- --------- 5V 500.00 100.00 275.70 3.3V 500.00 100.00 266.57 -12V 500.00 100.00 271.92 5VSB ******** ******** 1207.04 12V6 500.00 100.00 280.34 Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** 275.70 0 ******** ******** 266.57 0 ******** ******** 271.92 0 ******** ******** 1207.04 0 ******** ******** 280.34 Ref Ton From which Load = 0 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** 266.57 Tdl (ms) ******** ******** 1207.04 Tdls (ms) ******** 940.47 ================================================================================ STEP.36(UUT Test seq.36) : Turn On & Sequence Test(Power Good Delay Timing PASS Vin (V)= 264.00 Fin (Hz)= 63.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 19.060 5 2 4.750 4.750 3.3V 19.060 5 2 3.140 3.140 -12V 0.700 5 2 -10.800 -10.800 5VSB 3.080 5 2 4.750 4.750 12V6 109.850 5 2 11.400 11.400 Load Ton Ton Ton Name Max Min (ms) ------------- -------- -------- --------- 5V 500.00 100.00 275.24 3.3V 500.00 100.00 266.25 -12V 500.00 100.00 271.61 5VSB ******** ******** 1030.31 12V6 500.00 100.00 279.27 Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** 275.24 0 ******** ******** 266.25 0 ******** ******** 271.61 0 ******** ******** 1030.31 0 ******** ******** 279.27 Ref Ton From which Load = 0 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** 266.25 Tdl (ms) ******** ******** 1030.31 Tdls (ms) ******** 764.06 ================================================================================ STEP.37(UUT Test seq.37) : Hold Up & Sequence Test(Power Fail Time 90Vac (T PASS Vin (V)= 90.00 Fin (Hz)= 60.00 Delay Time (ms)= 3000.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 18.250 9 12 4.750 0.500 3.3V 18.250 9 12 3.140 0.330 -12V 0.670 9 12 -10.800 -1.200 5VSB 2.950 9 12 4.750 0.500 12V6 77.150 9 12 11.400 1.200 Load Tholdup Tholdup Tholdup Name Max Min (ms) ------------- -------- -------- --------- 5V ******** 1.00 17.19 3.3V ******** 1.00 24.83 -12V ******** 1.00 25.86 5VSB ******** ******** 1533.72 12V6 ******** 1.00 15.47 Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** 17.19 0 ******** ******** 24.83 0 ******** ******** 25.86 0 ******** ******** 1533.72 0 ******** ******** 15.47 Ref Tholdup from which Load = 0 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** 15.47 Tdl (ms) ******** ******** 1533.72 Tdls (ms) ******** 1518.25 ================================================================================ STEP.38(UUT Test seq.38) : Hold Up & Sequence Test(Power Fail Time 264Vac ( PASS Vin (V)= 264.00 Fin (Hz)= 50.00 Delay Time (ms)= 3000.00 On Phase Delay(ms)= 4.17 UUT Off Time (s)= 5.00 Trigger: 1:TTL1R, 2:TTL2R, 3:TTL3R, 4:TTL4R, 5:CMPAR, 6:CMPBR, 7:SWR, 8:TTL1F, 9:TTL2F,10:TTL3F,11:TTL4F,12:CMPAF,13:CMPBF,14:SWF TTL Trigger Index Level ------- --------- 1 1.00 2 1.00 3 1.00 4 1.00 Load Loading Start End VcmpA VcmpB Name (A/Ohm/V) Trigger Trigger (V) (V) ------------- ---------- ------- ------- ------- ------- 5V 19.060 9 12 4.750 0.500 3.3V 19.060 9 12 3.140 0.330 -12V 0.700 9 12 -10.800 -1.200 5VSB 3.080 9 12 4.750 4.750 12V6 109.850 9 12 11.400 1.200 Load Tholdup Tholdup Tholdup Name Max Min (ms) ------------- -------- -------- --------- 5V ******** 1.00 4.74 3.3V ******** 1.00 10.76 -12V ******** 1.00 11.50 5VSB ******** ******** 1449.09 12V6 ******** 1.00 2.88 Ref Load Td Td Td No. Max Min (ms) ------------- -------- -------- --------- 0 ******** ******** 4.74 0 ******** ******** 10.76 0 ******** ******** 11.50 0 ******** ******** 1449.09 0 ******** ******** 2.88 Ref Tholdup from which Load = 0 Max Min Reading ------------- -------- -------- --------- Tds (ms) ******** ******** 2.88 Tdl (ms) ******** ******** 1449.09 Tdls (ms) ******** 1446.21 ================================================================================ STEP.39(UUT Test seq.39) : Input Current Test(Main Outputs Turn on Time 90V PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 18.250 3.3V 18.250 -12V 0.670 5VSB 2.950 12V6 77.150 Max Min Reading ------------- --------- --------- --------- Iinrms (A) 15.00 ****** 13.63 Iinpk+ (A) ****** ****** 19.52 Iinpk- (A) ****** ****** 19.36 ================================================================================ STEP.40(UUT Test seq.40) : Input Current Test(Main Outputs Turn on Time 100 PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 18.710 3.3V 18.710 -12V 0.690 5VSB 3.020 12V6 93.450 Max Min Reading ------------- --------- --------- --------- Iinrms (A) 15.00 ****** 14.45 Iinpk+ (A) ****** ****** 21.21 Iinpk- (A) ****** ****** 20.02 ================================================================================ STEP.41(UUT Test seq.41) : Input Current Test(Main Outputs Turn on Time 115 PASS Vin (V)= 115.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 19.060 3.3V 19.060 -12V 0.700 5VSB 3.080 12V6 109.850 Max Min Reading ------------- --------- --------- --------- Iinrms (A) 15.00 ****** 14.49 Iinpk+ (A) ****** ****** 21.30 Iinpk- (A) ****** ****** 20.62 ================================================================================ STEP.42(UUT Test seq.42) : Voltage Regulation Test(Min Load (Load A) 90Vac- PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.012 5.075 4.925 5.012 3.3V 3.349 3.250 3.310 3.349 3.250 3.310 -12V -12.360 -11.640 -12.030 -12.360 -11.640 -12.033 5VSB 5.150 4.850 5.012 5.150 4.850 5.012 12V6 12.120 11.880 12.014 12.120 11.880 12.009 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.003 5VSB ******* ******* 0.000 12V6 ******* ******* -0.005 ================================================================================ STEP.43(UUT Test seq.43) : Voltage Regulation Test(80+ 20% Load 90Vac-264Va PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 3.810 3.810 3.3V 3.810 3.810 -12V 0.140 0.140 5VSB 0.620 0.620 12V6 21.950 21.950 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 5.075 4.925 5.003 3.3V 3.349 3.250 3.307 3.349 3.250 3.303 -12V -12.360 -11.640 -12.035 -12.360 -11.640 -12.035 5VSB 5.150 4.850 4.992 5.150 4.850 4.992 12V6 12.120 11.880 12.019 12.120 11.880 12.005 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* -0.005 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* -0.014 ================================================================================ STEP.44(UUT Test seq.44) : Voltage Regulation Test(25% Load 90Vac-264Vac) - PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 4.760 4.760 3.3V 4.760 4.760 -12V 0.180 0.180 5VSB 0.770 0.770 12V6 27.450 27.450 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.000 5.075 4.925 4.997 3.3V 3.349 3.250 3.303 3.349 3.250 3.303 -12V -12.360 -11.640 -12.038 -12.360 -11.640 -12.038 5VSB 5.150 4.850 4.988 5.150 4.850 4.985 12V6 12.120 11.880 12.025 12.120 11.880 12.019 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* -0.002 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* -0.002 12V6 ******* ******* -0.006 ================================================================================ STEP.45(UUT Test seq.45) : Voltage Regulation Test(80+ 50% Load 90Vac-264Va PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 9.530 9.530 3.3V 9.530 9.530 -12V 0.350 0.350 5VSB 1.540 1.540 12V6 54.900 54.900 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.005 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.047 -12.360 -11.640 -12.047 5VSB 5.150 4.850 4.980 5.150 4.850 4.980 12V6 12.120 11.880 12.032 12.120 11.880 12.027 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* -0.005 ================================================================================ STEP.46(UUT Test seq.46) : Voltage Regulation Test(75% Load 90Vac-264Vac) - PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 14.290 14.290 3.3V 14.290 14.290 -12V 0.530 0.530 5VSB 2.310 2.310 12V6 82.400 82.400 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.008 3.3V 3.349 3.250 3.303 3.349 3.250 3.305 -12V -12.360 -11.640 -12.055 -12.360 -11.640 -12.055 5VSB 5.150 4.850 4.968 5.150 4.850 4.965 12V6 12.120 11.880 12.047 12.120 11.880 12.035 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.002 -12V ******* ******* 0.000 5VSB ******* ******* -0.002 12V6 ******* ******* -0.012 ================================================================================ STEP.47(UUT Test seq.47) : Voltage Regulation Test(80+ 100% Load 110Vac) -- PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 19.060 19.060 3.3V 19.060 19.060 -12V 0.700 0.700 5VSB 3.080 3.080 12V6 109.850 109.850 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.010 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.065 -12.360 -11.640 -12.065 5VSB 5.150 4.850 4.952 5.150 4.850 4.952 12V6 12.120 11.880 12.054 12.120 11.880 12.057 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.002 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.48(UUT Test seq.48) : Static Test ---- (5'203) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.305 ******* ******* 3.808 -12V -12.360 -11.640 -12.038 ******* ******* 0.143 5VSB 5.150 4.850 4.992 ******* ******* 0.622 12V6 12.120 11.880 12.009 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.48 ================================================================================ STEP.49(UUT Test seq.49) : Voltage Regulation Test(80+ 100% Load 264Vac) -- PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 19.060 19.060 3.3V 19.060 19.060 -12V 0.700 0.700 5VSB 3.080 3.080 12V6 109.850 109.850 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.008 3.3V 3.349 3.250 3.305 3.349 3.250 3.307 -12V -12.360 -11.640 -12.065 -12.360 -11.640 -12.065 5VSB 5.150 4.850 4.952 5.150 4.850 4.952 12V6 12.120 11.880 12.050 12.120 11.880 12.052 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.002 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.002 ================================================================================ STEP.50(UUT Test seq.50) : Voltage Regulation Test(80+ 100% Load 100Vac-110 PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.710 18.710 3.3V 18.710 18.710 -12V 0.690 0.690 5VSB 3.020 3.020 12V6 93.450 93.450 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.008 3.3V 3.349 3.250 3.307 3.349 3.250 3.307 -12V -12.360 -11.640 -12.060 -12.360 -11.640 -12.057 5VSB 5.150 4.850 4.952 5.150 4.850 4.952 12V6 12.120 11.880 12.047 12.120 11.880 12.052 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.003 5VSB ******* ******* 0.000 12V6 ******* ******* 0.005 ================================================================================ STEP.51(UUT Test seq.51) : Voltage Regulation Test(80+ 100% Load 90Vac-100V PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.250 18.250 3.3V 18.250 18.250 -12V 0.670 0.670 5VSB 2.950 2.950 12V6 77.150 77.150 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.008 3.3V 3.349 3.250 3.307 3.349 3.250 3.310 -12V -12.360 -11.640 -12.055 -12.360 -11.640 -12.052 5VSB 5.150 4.850 4.955 5.150 4.850 4.955 12V6 12.120 11.880 12.047 12.120 11.880 12.050 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.002 -12V ******* ******* -0.003 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.52(UUT Test seq.52) : Voltage Regulation Test(12V Full Load 110Vac (Lo PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 125.000 125.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.023 5.075 4.925 5.023 3.3V 3.349 3.250 3.315 3.349 3.250 3.313 -12V -12.360 -11.640 -12.073 -12.360 -11.640 -12.070 5VSB 5.150 4.850 5.025 5.150 4.850 5.025 12V6 12.120 11.880 12.047 12.120 11.880 12.050 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* -0.002 -12V ******* ******* -0.003 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.53(UUT Test seq.53) : Static Test ---- (5'203) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.307 ******* ******* 3.808 -12V -12.360 -11.640 -12.038 ******* ******* 0.143 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.012 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.56 ================================================================================ STEP.54(UUT Test seq.54) : Voltage Regulation Test(12V Full Load 264Vac (Lo PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 125.000 125.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.020 5.075 4.925 5.020 3.3V 3.349 3.250 3.315 3.349 3.250 3.315 -12V -12.360 -11.640 -12.073 -12.360 -11.640 -12.073 5VSB 5.150 4.850 5.023 5.150 4.850 5.023 12V6 12.120 11.880 12.042 12.120 11.880 12.045 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.55(UUT Test seq.55) : Voltage Regulation Test(12V Full Load 100Vac-110 PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 108.350 108.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.023 5.075 4.925 5.023 3.3V 3.349 3.250 3.315 3.349 3.250 3.315 -12V -12.360 -11.640 -12.065 -12.360 -11.640 -12.065 5VSB 5.150 4.850 5.023 5.150 4.850 5.023 12V6 12.120 11.880 12.042 12.120 11.880 12.045 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.56(UUT Test seq.56) : Voltage Regulation Test(12V Full Load 90Vac-100V PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 91.650 91.650 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.020 5.075 4.925 5.020 3.3V 3.349 3.250 3.315 3.349 3.250 3.315 -12V -12.360 -11.640 -12.060 -12.360 -11.640 -12.063 5VSB 5.150 4.850 5.023 5.150 4.850 5.023 12V6 12.120 11.880 12.037 12.120 11.880 12.040 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.002 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.57(UUT Test seq.57) : Voltage Regulation Test(Peak Load 115Vac 17 Seco PASS Vin-1 (V)= 115.00 Fin-1 (Hz)= 60.00 Vin-2 (V)= 115.00 Fin-2 (Hz)= 60.00 Delay Time (ms)= 8500.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 19.060 19.060 3.3V 19.060 19.060 -12V 0.700 0.700 5VSB 3.080 3.080 12V6 122.350 122.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.008 3.3V 3.349 3.250 3.310 3.349 3.250 3.310 -12V -12.360 -11.640 -12.070 -12.360 -11.640 -12.068 5VSB 5.150 4.850 4.952 5.150 4.850 4.952 12V6 12.120 11.880 12.062 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.002 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.58(UUT Test seq.58) : Static Test ---- (5'187) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.307 ******* ******* 3.808 -12V -12.360 -11.640 -12.038 ******* ******* 0.143 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.014 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.60 ================================================================================ STEP.59(UUT Test seq.59) : Voltage Regulation Test(Peak Load 230Vac 17 Seco PASS Vin-1 (V)= 230.00 Fin-1 (Hz)= 50.00 Vin-2 (V)= 230.00 Fin-2 (Hz)= 50.00 Delay Time (ms)= 8500.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 19.060 19.060 3.3V 19.060 19.060 -12V 0.700 0.700 5VSB 3.080 3.080 12V6 122.350 122.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.008 3.3V 3.349 3.250 3.310 3.349 3.250 3.310 -12V -12.360 -11.640 -12.068 -12.360 -11.640 -12.068 5VSB 5.150 4.850 4.952 5.150 4.850 4.952 12V6 12.120 11.880 12.062 12.120 11.880 12.062 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.60(UUT Test seq.60) : Voltage Regulation Test(Load 1 (+5V FL) 110Vac) PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 107.750 107.750 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.995 5.075 4.925 4.995 3.3V 3.349 3.250 3.313 3.349 3.250 3.315 -12V -12.360 -11.640 -12.063 -12.360 -11.640 -12.060 5VSB 5.150 4.850 4.948 5.150 4.850 4.948 12V6 12.120 11.880 12.062 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.002 -12V ******* ******* -0.002 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.61(UUT Test seq.61) : Static Test ---- (5'203) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.307 ******* ******* 3.808 -12V -12.360 -11.640 -12.038 ******* ******* 0.143 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.014 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.60 ================================================================================ STEP.62(UUT Test seq.62) : Voltage Regulation Test(Load 1 (+5V FL) 264Vac) PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 107.750 107.750 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.995 5.075 4.925 4.995 3.3V 3.349 3.250 3.313 3.349 3.250 3.313 -12V -12.360 -11.640 -12.060 -12.360 -11.640 -12.060 5VSB 5.150 4.850 4.945 5.150 4.850 4.945 12V6 12.120 11.880 12.062 12.120 11.880 12.062 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.63(UUT Test seq.63) : Voltage Regulation Test(Load 1 (+5V FL) 100Vac-1 PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 91.100 91.100 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.995 5.075 4.925 4.997 3.3V 3.349 3.250 3.315 3.349 3.250 3.318 -12V -12.360 -11.640 -12.055 -12.360 -11.640 -12.055 5VSB 5.150 4.850 4.945 5.150 4.850 4.945 12V6 12.120 11.880 12.054 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.002 3.3V ******* ******* 0.002 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.011 ================================================================================ STEP.64(UUT Test seq.64) : Voltage Regulation Test(Load 1 (+5V FL) 90Vac-10 PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 74.400 74.400 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.995 5.075 4.925 4.995 3.3V 3.349 3.250 3.318 3.349 3.250 3.315 -12V -12.360 -11.640 -12.050 -12.360 -11.640 -12.050 5VSB 5.150 4.850 4.945 5.150 4.850 4.945 12V6 12.120 11.880 12.057 12.120 11.880 12.057 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* -0.002 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.65(UUT Test seq.65) : Voltage Regulation Test(Load 2 (+3.3V FL) 110Vac PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 107.750 107.750 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.015 5.075 4.925 5.015 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.065 -12.360 -11.640 -12.065 5VSB 5.150 4.850 4.940 5.150 4.850 4.940 12V6 12.120 11.880 12.062 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.66(UUT Test seq.66) : Static Test ---- (5'203) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.310 ******* ******* 3.808 -12V -12.360 -11.640 -12.040 ******* ******* 0.142 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.017 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.67 ================================================================================ STEP.67(UUT Test seq.67) : Voltage Regulation Test(Load 2 (+3.3V FL) 264Vac PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 107.750 107.750 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.012 5.075 4.925 5.012 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.065 -12.360 -11.640 -12.065 5VSB 5.150 4.850 4.938 5.150 4.850 4.940 12V6 12.120 11.880 12.059 12.120 11.880 12.062 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.002 12V6 ******* ******* 0.003 ================================================================================ STEP.68(UUT Test seq.68) : Voltage Regulation Test(Load 2 (+3.3V FL) 100Vac PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 91.100 91.100 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.012 5.075 4.925 5.015 3.3V 3.349 3.250 3.305 3.349 3.250 3.310 -12V -12.360 -11.640 -12.060 -12.360 -11.640 -12.060 5VSB 5.150 4.850 4.940 5.150 4.850 4.943 12V6 12.120 11.880 12.057 12.120 11.880 12.059 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.002 3.3V ******* ******* 0.005 -12V ******* ******* 0.000 5VSB ******* ******* 0.002 12V6 ******* ******* 0.002 ================================================================================ STEP.69(UUT Test seq.69) : Voltage Regulation Test(Load 2 (+3.3V FL) 90Vac- PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.800 0.800 5VSB 3.500 3.500 12V6 74.400 74.400 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.012 5.075 4.925 5.012 3.3V 3.349 3.250 3.307 3.349 3.250 3.307 -12V -12.360 -11.640 -12.055 -12.360 -11.640 -12.055 5VSB 5.150 4.850 4.940 5.150 4.850 4.940 12V6 12.120 11.880 12.054 12.120 11.880 12.054 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.70(UUT Test seq.70) : Voltage Regulation Test(Load 3 (-12V Min Load) 1 PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 125.000 125.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.023 5.075 4.925 5.023 3.3V 3.349 3.250 3.320 3.349 3.250 3.320 -12V -12.360 -11.640 -12.075 -12.360 -11.640 -12.075 5VSB 5.150 4.850 5.025 5.150 4.850 5.025 12V6 12.120 11.880 12.054 12.120 11.880 12.057 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.71(UUT Test seq.71) : Static Test ---- (5'203) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.313 ******* ******* 3.808 -12V -12.360 -11.640 -12.040 ******* ******* 0.142 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.019 ******* ******* 21.994 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.83 ================================================================================ STEP.72(UUT Test seq.72) : Voltage Regulation Test(Load 3 (-12V Min Load) 2 PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 125.000 125.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.023 5.075 4.925 5.023 3.3V 3.349 3.250 3.320 3.349 3.250 3.320 -12V -12.360 -11.640 -12.075 -12.360 -11.640 -12.075 5VSB 5.150 4.850 5.023 5.150 4.850 5.023 12V6 12.120 11.880 12.047 12.120 11.880 12.052 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.005 ================================================================================ STEP.73(UUT Test seq.73) : Voltage Regulation Test(Load 3 (-12V Min Load) 1 PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 108.350 108.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.023 5.075 4.925 5.023 3.3V 3.349 3.250 3.320 3.349 3.250 3.320 -12V -12.360 -11.640 -12.068 -12.360 -11.640 -12.068 5VSB 5.150 4.850 5.025 5.150 4.850 5.023 12V6 12.120 11.880 12.050 12.120 11.880 12.052 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* -0.002 12V6 ******* ******* 0.002 ================================================================================ STEP.74(UUT Test seq.74) : Voltage Regulation Test(Load 3 (-12V Min Load) 9 PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 91.650 91.650 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.020 5.075 4.925 5.020 3.3V 3.349 3.250 3.320 3.349 3.250 3.318 -12V -12.360 -11.640 -12.063 -12.360 -11.640 -12.063 5VSB 5.150 4.850 5.023 5.150 4.850 5.023 12V6 12.120 11.880 12.047 12.120 11.880 12.047 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* -0.002 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.75(UUT Test seq.75) : Voltage Regulation Test(Load 4 (+5V +3.3V FL, 0A PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.000 18.000 3.3V 27.270 27.270 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.997 5.075 4.925 4.997 3.3V 3.349 3.250 3.303 3.349 3.250 3.303 -12V -12.360 -11.640 -12.063 -12.360 -11.640 -12.063 5VSB 5.150 4.850 5.030 5.150 4.850 5.030 12V6 12.120 11.880 12.042 12.120 11.880 12.045 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.003 ================================================================================ STEP.76(UUT Test seq.76) : Voltage Regulation Test(Load (Load B 5V) 90Vac-2 PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.091 9.091 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.983 5.075 4.925 4.980 3.3V 3.349 3.250 3.315 3.349 3.250 3.313 -12V -12.360 -11.640 -12.057 -12.360 -11.640 -12.057 5VSB 5.150 4.850 5.037 5.150 4.850 5.032 12V6 12.120 11.880 12.045 12.120 11.880 12.037 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* -0.002 3.3V ******* ******* -0.002 -12V ******* ******* 0.000 5VSB ******* ******* -0.005 12V6 ******* ******* -0.008 ================================================================================ STEP.77(UUT Test seq.77) : Voltage Regulation Test(Load (Load B 3.3V) 90Vac PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.997 5.075 4.925 5.000 3.3V 3.349 3.250 3.303 3.349 3.250 3.303 -12V -12.360 -11.640 -12.060 -12.360 -11.640 -12.060 5VSB 5.150 4.850 5.028 5.150 4.850 5.030 12V6 12.120 11.880 12.037 12.120 11.880 12.040 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.002 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.002 12V6 ******* ******* 0.003 ================================================================================ STEP.78(UUT Test seq.78) : Voltage Regulation Test(Load 5 (+5V FL, 0A) 90Va PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.005 5.075 4.925 5.003 3.3V 3.349 3.250 3.320 3.349 3.250 3.315 -12V -12.360 -11.640 -12.050 -12.360 -11.640 -12.050 5VSB 5.150 4.850 5.057 5.150 4.850 5.057 12V6 12.120 11.880 12.042 12.120 11.880 12.047 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* -0.002 3.3V ******* ******* -0.005 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.005 ================================================================================ STEP.79(UUT Test seq.79) : Voltage Regulation Test(Load 6 (+3.3V FL, 0A) 90 PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 30.000 30.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.012 5.075 4.925 5.012 3.3V 3.349 3.250 3.320 3.349 3.250 3.320 -12V -12.360 -11.640 -12.052 -12.360 -11.640 -12.052 5VSB 5.150 4.850 5.015 5.150 4.850 5.015 12V6 12.120 11.880 12.032 12.120 11.880 12.030 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* -0.002 ================================================================================ STEP.80(UUT Test seq.80) : Voltage Regulation Test(Load 7 (INTEL C6) 90Vac- PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 5.000 5.000 3.3V 5.000 5.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.015 5.075 4.925 5.015 3.3V 3.349 3.250 3.322 3.349 3.250 3.322 -12V -12.360 -11.640 -12.040 -12.360 -11.640 -12.040 5VSB 5.150 4.850 5.025 5.150 4.850 5.025 12V6 12.120 11.880 12.032 12.120 11.880 12.032 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.81(UUT Test seq.81) : Voltage Regulation Test(Load 9 (-12V FL) 90Vac-2 PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.800 0.800 5VSB 0.000 0.000 12V6 0.000 0.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.035 5.075 4.925 5.035 3.3V 3.349 3.250 3.332 3.349 3.250 3.332 -12V -12.360 -11.640 -12.005 -12.360 -11.640 -12.002 5VSB 5.150 4.850 5.035 5.150 4.850 5.035 12V6 12.120 11.880 12.032 12.120 11.880 12.032 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.003 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.82(UUT Test seq.82) : Voltage Regulation Test(Load 10 (+12V FL, 0A) (L PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 125.000 125.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.043 5.075 4.925 5.043 3.3V 3.349 3.250 3.332 3.349 3.250 3.332 -12V -12.360 -11.640 -12.075 -12.360 -11.640 -12.075 5VSB 5.150 4.850 5.043 5.150 4.850 5.045 12V6 12.120 11.880 12.050 12.120 11.880 12.050 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.002 12V6 ******* ******* 0.000 ================================================================================ STEP.83(UUT Test seq.83) : Static Test ---- (5'203) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.023 ******* ******* 3.808 3.3V 3.349 3.250 3.328 ******* ******* 3.808 -12V -12.360 -11.640 -12.040 ******* ******* 0.143 5VSB 5.150 4.850 5.012 ******* ******* 0.621 12V6 12.120 11.880 12.019 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.87 ================================================================================ STEP.84(UUT Test seq.84) : Voltage Regulation Test(Load 10 (+12V FL, 0A) (L PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 125.000 125.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.043 5.075 4.925 5.043 3.3V 3.349 3.250 3.332 3.349 3.250 3.332 -12V -12.360 -11.640 -12.075 -12.360 -11.640 -12.075 5VSB 5.150 4.850 5.043 5.150 4.850 5.043 12V6 12.120 11.880 12.052 12.120 11.880 12.050 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* -0.002 ================================================================================ STEP.85(UUT Test seq.85) : Voltage Regulation Test(Load 10 (+12V FL, 0A) (L PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 108.350 108.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.043 5.075 4.925 5.043 3.3V 3.349 3.250 3.332 3.349 3.250 3.332 -12V -12.360 -11.640 -12.068 -12.360 -11.640 -12.068 5VSB 5.150 4.850 5.043 5.150 4.850 5.045 12V6 12.120 11.880 12.052 12.120 11.880 12.052 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.002 12V6 ******* ******* 0.000 ================================================================================ STEP.86(UUT Test seq.86) : Voltage Regulation Test(Load 10 (+12V FL, 0A) (L PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 0.000 0.000 3.3V 0.000 0.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 91.650 91.650 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.043 5.075 4.925 5.043 3.3V 3.349 3.250 3.332 3.349 3.250 3.332 -12V -12.360 -11.640 -12.065 -12.360 -11.640 -12.063 5VSB 5.150 4.850 5.043 5.150 4.850 5.043 12V6 12.120 11.880 12.045 12.120 11.880 12.045 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.002 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.87(UUT Test seq.87) : Voltage Regulation Test(Load 11 (+5V +3.3V FL, + PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.000 18.000 3.3V 27.270 27.270 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 110.000 110.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.095 -12.360 -11.640 -12.092 5VSB 5.150 4.850 5.040 5.150 4.850 5.037 12V6 12.120 11.880 12.065 12.120 11.880 12.067 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* -0.002 3.3V ******* ******* 0.000 -12V ******* ******* -0.003 5VSB ******* ******* -0.002 12V6 ******* ******* 0.002 ================================================================================ STEP.88(UUT Test seq.88) : Static Test ---- (5'204) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.810 3.3V 3.349 3.250 3.310 ******* ******* 3.808 -12V -12.360 -11.640 -12.038 ******* ******* 0.142 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.017 ******* ******* 21.984 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.67 ================================================================================ STEP.89(UUT Test seq.89) : Voltage Regulation Test(Load 11 (+5V +3.3V FL, + PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.000 18.000 3.3V 27.270 27.270 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 110.000 110.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.095 -12.360 -11.640 -12.095 5VSB 5.150 4.850 5.035 5.150 4.850 5.035 12V6 12.120 11.880 12.059 12.120 11.880 12.059 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.002 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.90(UUT Test seq.90) : Voltage Regulation Test(Load 11 (+5V +3.3V FL, + PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.000 18.000 3.3V 27.270 27.270 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 93.350 93.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.008 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.307 -12V -12.360 -11.640 -12.090 -12.360 -11.640 -12.090 5VSB 5.150 4.850 5.040 5.150 4.850 5.037 12V6 12.120 11.880 12.059 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* -0.002 3.3V ******* ******* 0.002 -12V ******* ******* 0.000 5VSB ******* ******* -0.002 12V6 ******* ******* 0.006 ================================================================================ STEP.91(UUT Test seq.91) : Voltage Regulation Test(Load 11 (+5V +3.3V FL, + PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 18.000 18.000 3.3V 27.270 27.270 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 76.650 76.650 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 5.075 4.925 5.005 3.3V 3.349 3.250 3.307 3.349 3.250 3.307 -12V -12.360 -11.640 -12.085 -12.360 -11.640 -12.083 5VSB 5.150 4.850 5.037 5.150 4.850 5.035 12V6 12.120 11.880 12.054 12.120 11.880 12.052 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.002 3.3V ******* ******* 0.000 -12V ******* ******* -0.002 5VSB ******* ******* -0.002 12V6 ******* ******* -0.002 ================================================================================ STEP.92(UUT Test seq.92) : Voltage Regulation Test(Load (Load C 5V) 110Vac) PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 110.000 110.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.992 5.075 4.925 4.992 3.3V 3.349 3.250 3.318 3.349 3.250 3.318 -12V -12.360 -11.640 -12.090 -12.360 -11.640 -12.090 5VSB 5.150 4.850 5.045 5.150 4.850 5.045 12V6 12.120 11.880 12.062 12.120 11.880 12.067 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.005 ================================================================================ STEP.93(UUT Test seq.93) : Static Test ---- (5'204) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.808 3.3V 3.349 3.250 3.313 ******* ******* 3.808 -12V -12.360 -11.640 -12.040 ******* ******* 0.142 5VSB 5.150 4.850 4.992 ******* ******* 0.622 12V6 12.120 11.880 12.019 ******* ******* 21.994 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.83 ================================================================================ STEP.94(UUT Test seq.94) : Voltage Regulation Test(Load (Load C 5V) 264Vac) PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 110.000 110.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.990 5.075 4.925 4.990 3.3V 3.349 3.250 3.318 3.349 3.250 3.318 -12V -12.360 -11.640 -12.092 -12.360 -11.640 -12.090 5VSB 5.150 4.850 5.045 5.150 4.850 5.043 12V6 12.120 11.880 12.062 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.002 5VSB ******* ******* -0.002 12V6 ******* ******* 0.003 ================================================================================ STEP.95(UUT Test seq.95) : Voltage Regulation Test(Load (Load C 5V) 100Vac- PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 93.350 93.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.990 5.075 4.925 4.990 3.3V 3.349 3.250 3.315 3.349 3.250 3.318 -12V -12.360 -11.640 -12.087 -12.360 -11.640 -12.085 5VSB 5.150 4.850 5.043 5.150 4.850 5.045 12V6 12.120 11.880 12.059 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.002 -12V ******* ******* -0.002 5VSB ******* ******* 0.002 12V6 ******* ******* 0.006 ================================================================================ STEP.96(UUT Test seq.96) : Voltage Regulation Test(Load (Load C 5V) 90Vac-1 PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 30.000 30.000 3.3V 9.090 9.090 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 76.650 76.650 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 4.990 5.075 4.925 4.990 3.3V 3.349 3.250 3.318 3.349 3.250 3.318 -12V -12.360 -11.640 -12.083 -12.360 -11.640 -12.080 5VSB 5.150 4.850 5.043 5.150 4.850 5.043 12V6 12.120 11.880 12.059 12.120 11.880 12.057 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* -0.003 5VSB ******* ******* 0.000 12V6 ******* ******* -0.002 ================================================================================ STEP.97(UUT Test seq.97) : Voltage Regulation Test(Load (Load C 3.3V) 110Va PASS Vin-1 (V)= 110.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 110.000 110.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.010 5.075 4.925 5.010 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.095 -12.360 -11.640 -12.097 5VSB 5.150 4.850 5.037 5.150 4.850 5.037 12V6 12.120 11.880 12.067 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.002 5VSB ******* ******* 0.000 12V6 ******* ******* -0.002 ================================================================================ STEP.98(UUT Test seq.98) : Static Test ---- (5'204) ----------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.000 ******* ******* 3.810 3.3V 3.349 3.250 3.313 ******* ******* 3.806 -12V -12.360 -11.640 -12.038 ******* ******* 0.143 5VSB 5.150 4.850 4.992 ******* ******* 0.621 12V6 12.120 11.880 12.022 ******* ******* 21.994 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.89 ================================================================================ STEP.99(UUT Test seq.99) : Voltage Regulation Test(Load (Load C 3.3V) 264Va PASS Vin-1 (V)= 264.00 Fin-1 (Hz)= 63.00 Vin-2 (V)= 264.00 Fin-2 (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 110.000 110.000 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.005 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.095 -12.360 -11.640 -12.095 5VSB 5.150 4.850 5.032 5.150 4.850 5.035 12V6 12.120 11.880 12.062 12.120 11.880 12.059 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.002 12V6 ******* ******* -0.003 ================================================================================ STEP.100(UUT Test seq.100) : Voltage Regulation Test(Load (Load C 3.3V) 100 PASS Vin-1 (V)= 100.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 110.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 93.350 93.350 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.005 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.307 -12V -12.360 -11.640 -12.092 -12.360 -11.640 -12.090 5VSB 5.150 4.850 5.032 5.150 4.850 5.035 12V6 12.120 11.880 12.059 12.120 11.880 12.065 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.002 -12V ******* ******* -0.002 5VSB ******* ******* 0.002 12V6 ******* ******* 0.006 ================================================================================ STEP.101(UUT Test seq.101) : Voltage Regulation Test(Load (Load C 3.3V) 90V PASS Vin-1 (V)= 90.00 Fin-1 (Hz)= 47.00 Vin-2 (V)= 100.00 Fin-2 (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Loading-1 Loading-2 Name (A/Ohm/V) (A/Ohm/V) ------------- ---------- ---------- 5V 16.200 16.200 3.3V 30.000 30.000 -12V 0.000 0.000 5VSB 0.000 0.000 12V6 76.650 76.650 Load Vout-1 Vout-1 Vout-1 Vout-2 Vout-2 Vout-2 Name Max Min (V) Max Min (V) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.005 5.075 4.925 5.005 3.3V 3.349 3.250 3.305 3.349 3.250 3.305 -12V -12.360 -11.640 -12.085 -12.360 -11.640 -12.085 5VSB 5.150 4.850 5.035 5.150 4.850 5.035 12V6 12.120 11.880 12.054 12.120 11.880 12.054 Load dVout dVout dVout Name Max Min (V) ------------- ------- ------- ------- 5V ******* ******* 0.000 3.3V ******* ******* 0.000 -12V ******* ******* 0.000 5VSB ******* ******* 0.000 12V6 ******* ******* 0.000 ================================================================================ STEP.102(UUT Test seq.102) : Noise Test(Min Load (Load A) 90Vac) ---- (6'04 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0026 3.3V 0.000 0.030 ******* 0.0021 -12V 0.000 0.040 ******* 0.0057 5VSB 0.000 0.040 ******* 0.0021 12V6 0.000 0.040 ******* 0.0016 ================================================================================ STEP.103(UUT Test seq.103) : Noise Test(10% Load 90Vac) ---- (2'031) ------ PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 1.910 0.030 ******* 0.0035 3.3V 1.910 0.030 ******* 0.0012 -12V 0.070 0.040 ******* 0.0038 5VSB 0.310 0.040 ******* 0.0031 12V6 11.000 0.040 ******* 0.0006 ================================================================================ STEP.104(UUT Test seq.104) : Noise Test(80+ 20% Load 90Vac) ---- (2'000) -- PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 3.810 0.030 ******* 0.0025 3.3V 3.810 0.030 ******* 0.0010 -12V 0.140 0.040 ******* 0.0044 5VSB 0.620 0.040 ******* 0.0024 12V6 21.950 0.040 ******* 0.0007 ================================================================================ STEP.105(UUT Test seq.105) : Noise Test(25% Load 90Vac) ---- (2'047) ------ PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 4.760 0.030 ******* 0.0027 3.3V 4.760 0.030 ******* 0.0014 -12V 0.180 0.040 ******* 0.0054 5VSB 0.770 0.040 ******* 0.0025 12V6 27.450 0.040 ******* 0.0008 ================================================================================ STEP.106(UUT Test seq.106) : Noise Test(80+ 50% Load 90Vac) ---- (2'015) -- PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 9.530 0.030 ******* 0.0048 3.3V 9.530 0.030 ******* 0.0023 -12V 0.350 0.040 ******* 0.0073 5VSB 1.540 0.040 ******* 0.0036 12V6 54.900 0.040 ******* 0.0013 ================================================================================ STEP.107(UUT Test seq.107) : Noise Test(75% Load 90Vac) ---- (2'015) ------ PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 14.290 0.030 ******* 0.0070 3.3V 14.290 0.030 ******* 0.0035 -12V 0.530 0.040 ******* 0.0094 5VSB 2.310 0.040 ******* 0.0046 12V6 82.400 0.040 ******* 0.0014 ================================================================================ STEP.108(UUT Test seq.108) : Noise Test(80+ 100% Load 90Vac) ---- (2'015) - PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.250 0.030 ******* 0.0092 3.3V 18.250 0.030 ******* 0.0045 -12V 0.670 0.040 ******* 0.0115 5VSB 2.950 0.040 ******* 0.0052 12V6 77.150 0.040 ******* 0.0013 ================================================================================ STEP.109(UUT Test seq.109) : Noise Test(80+ 100% Load 100Vac) ---- (2'032) PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.710 0.030 ******* 0.0093 3.3V 18.710 0.030 ******* 0.0048 -12V 0.690 0.040 ******* 0.0117 5VSB 3.020 0.040 ******* 0.0054 12V6 93.450 0.040 ******* 0.0014 ================================================================================ STEP.110(UUT Test seq.110) : Noise Test(80+ 100% Load 110Vac) ---- (2'016) PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 19.060 0.030 ******* 0.0096 3.3V 19.060 0.030 ******* 0.0057 -12V 0.700 0.040 ******* 0.0118 5VSB 3.080 0.040 ******* 0.0057 12V6 109.850 0.040 ******* 0.0014 ================================================================================ STEP.111(UUT Test seq.111) : Noise Test(12V Full Load 90Vac (Load D)) ---- PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0025 3.3V 0.000 0.030 ******* 0.0027 -12V 0.000 0.040 ******* 0.0033 5VSB 0.000 0.040 ******* 0.0026 12V6 91.650 0.040 ******* 0.0015 ================================================================================ STEP.112(UUT Test seq.112) : Noise Test(12V Full Load 100Vac (Load D)) ---- PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0026 3.3V 0.000 0.030 ******* 0.0026 -12V 0.000 0.040 ******* 0.0033 5VSB 0.000 0.040 ******* 0.0033 12V6 108.350 0.040 ******* 0.0015 ================================================================================ STEP.113(UUT Test seq.113) : Noise Test(12V Full Load 110Vac (Load D)) ---- PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0026 3.3V 0.000 0.030 ******* 0.0028 -12V 0.000 0.040 ******* 0.0037 5VSB 0.000 0.040 ******* 0.0037 12V6 125.000 0.040 ******* 0.0014 ================================================================================ STEP.114(UUT Test seq.114) : Noise Test(Peak Load 115Vac) ---- (2'031) ---- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 19.060 0.030 ******* 0.0095 3.3V 19.060 0.030 ******* 0.0057 -12V 0.700 0.040 ******* 0.0116 5VSB 3.080 0.040 ******* 0.0054 12V6 122.350 0.040 ******* 0.0012 ================================================================================ STEP.115(UUT Test seq.115) : Noise Test(Load 1 (+5V FL) 90Vac) ---- (2'047) PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0060 3.3V 9.090 0.030 ******* 0.0033 -12V 0.800 0.040 ******* 0.0079 5VSB 3.500 0.040 ******* 0.0039 12V6 74.400 0.040 ******* 0.0014 ================================================================================ STEP.116(UUT Test seq.116) : Noise Test(Load 1 (+5V FL) 100Vac) ---- (2'000 PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0063 3.3V 9.090 0.030 ******* 0.0037 -12V 0.800 0.040 ******* 0.0077 5VSB 3.500 0.040 ******* 0.0038 12V6 91.100 0.040 ******* 0.0013 ================================================================================ STEP.117(UUT Test seq.117) : Noise Test(Load 1 (+5V FL) 110Vac) ---- (2'000 PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0063 3.3V 9.090 0.030 ******* 0.0036 -12V 0.800 0.040 ******* 0.0075 5VSB 3.500 0.040 ******* 0.0040 12V6 107.750 0.040 ******* 0.0014 ================================================================================ STEP.118(UUT Test seq.118) : Noise Test(Load 2 (+3.3V FL) 90Vac) ---- (2'01 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0152 3.3V 30.000 0.030 ******* 0.0087 -12V 0.800 0.040 ******* 0.0169 5VSB 3.500 0.040 ******* 0.0076 12V6 74.400 0.040 ******* 0.0015 ================================================================================ STEP.119(UUT Test seq.119) : Noise Test(Load 2 (+3.3V FL) 100Vac) ---- (2'0 PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0152 3.3V 30.000 0.030 ******* 0.0086 -12V 0.800 0.040 ******* 0.0169 5VSB 3.500 0.040 ******* 0.0077 12V6 91.100 0.040 ******* 0.0014 ================================================================================ STEP.120(UUT Test seq.120) : Noise Test(Load 2 (+3.3V FL) 110Vac) ---- (2'0 PASS Vin (V)= 110.00 Fin (Hz)= 60.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0151 3.3V 30.000 0.030 ******* 0.0086 -12V 0.800 0.040 ******* 0.0169 5VSB 3.500 0.040 ******* 0.0079 12V6 107.750 0.040 ******* 0.0013 ================================================================================ STEP.121(UUT Test seq.121) : Noise Test(Load 3 (-12V Min Load) 90Vac) ---- PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0026 3.3V 0.000 0.030 ******* 0.0023 -12V 0.000 0.040 ******* 0.0033 5VSB 0.000 0.040 ******* 0.0027 12V6 91.650 0.040 ******* 0.0014 ================================================================================ STEP.122(UUT Test seq.122) : Noise Test(Load 3 (-12V Min Load) 100Vac) ---- PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0025 3.3V 0.000 0.030 ******* 0.0024 -12V 0.000 0.040 ******* 0.0030 5VSB 0.000 0.040 ******* 0.0029 12V6 108.350 0.040 ******* 0.0015 ================================================================================ STEP.123(UUT Test seq.123) : Noise Test(Load 3 (-12V Min Load) 110Vac) ---- PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0029 3.3V 0.000 0.030 ******* 0.0030 -12V 0.000 0.040 ******* 0.0035 5VSB 0.000 0.040 ******* 0.0039 12V6 125.000 0.040 ******* 0.0016 ================================================================================ STEP.124(UUT Test seq.124) : Noise Test(Load 4 (+5V +3.3V FL, 0A) (Load B) PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.000 0.030 ******* 0.0126 3.3V 27.270 0.030 ******* 0.0062 -12V 0.000 0.040 ******* 0.0138 5VSB 0.000 0.040 ******* 0.0044 12V6 0.000 0.040 ******* 0.0014 ================================================================================ STEP.125(UUT Test seq.125) : Noise Test(Load (Load B 5V) 90Vac) ---- (2'000 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0049 3.3V 9.091 0.030 ******* 0.0023 -12V 0.000 0.040 ******* 0.0057 5VSB 0.000 0.040 ******* 0.0022 12V6 0.000 0.040 ******* 0.0005 ================================================================================ STEP.126(UUT Test seq.126) : Noise Test(Load (Load B 3.3V) 90Vac) ---- (1'9 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0138 3.3V 30.000 0.030 ******* 0.0065 -12V 0.000 0.040 ******* 0.0154 5VSB 0.000 0.040 ******* 0.0049 12V6 0.000 0.040 ******* 0.0005 ================================================================================ STEP.127(UUT Test seq.127) : Noise Test(Load 5 (+5V FL, 0A) 90Vac) ---- (1' PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0038 3.3V 0.000 0.030 ******* 0.0017 -12V 0.000 0.040 ******* 0.0023 5VSB 0.000 0.040 ******* 0.0025 12V6 0.000 0.040 ******* 0.0005 ================================================================================ STEP.128(UUT Test seq.128) : Noise Test(Load 6 (+3.3V FL, 0A) 90Vac) ---- ( PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0139 3.3V 30.000 0.030 ******* 0.0065 -12V 0.000 0.040 ******* 0.0153 5VSB 0.000 0.040 ******* 0.0049 12V6 0.000 0.040 ******* 0.0009 ================================================================================ STEP.129(UUT Test seq.129) : Noise Test(Load 7 (INTEL C6) 90Vac) ---- (1'98 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 5.000 0.030 ******* 0.0027 3.3V 5.000 0.030 ******* 0.0019 -12V 0.000 0.040 ******* 0.0041 5VSB 0.000 0.040 ******* 0.0014 12V6 0.000 0.040 ******* 0.0011 ================================================================================ STEP.130(UUT Test seq.130) : Noise Test(Load 9 (-12V FL) 90Vac) ---- (2'016 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0027 3.3V 0.000 0.030 ******* 0.0024 -12V 0.800 0.040 ******* 0.0048 5VSB 0.000 0.040 ******* 0.0018 12V6 0.000 0.040 ******* 0.0006 ================================================================================ STEP.131(UUT Test seq.131) : Noise Test(Load 10 (+12V FL, 0A) (Load E) 90Va PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0024 3.3V 0.000 0.030 ******* 0.0027 -12V 0.000 0.040 ******* 0.0032 5VSB 0.000 0.040 ******* 0.0026 12V6 91.650 0.040 ******* 0.0013 ================================================================================ STEP.132(UUT Test seq.132) : Noise Test(Load 10 (+12V FL, 0A) (Load E) 100V PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0026 3.3V 0.000 0.030 ******* 0.0024 -12V 0.000 0.040 ******* 0.0030 5VSB 0.000 0.040 ******* 0.0030 12V6 108.350 0.040 ******* 0.0014 ================================================================================ STEP.133(UUT Test seq.133) : Noise Test(Load 10 (+12V FL, 0A) (Load E) 110V PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0025 3.3V 0.000 0.030 ******* 0.0026 -12V 0.000 0.040 ******* 0.0038 5VSB 0.000 0.040 ******* 0.0038 12V6 125.000 0.040 ******* 0.0016 ================================================================================ STEP.134(UUT Test seq.134) : Noise Test(Load 11 (+5V +3.3V FL, +12V) (Load PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.000 0.030 ******* 0.0130 3.3V 27.270 0.030 ******* 0.0081 -12V 0.000 0.040 ******* 0.0133 5VSB 0.000 0.040 ******* 0.0054 12V6 76.650 0.040 ******* 0.0011 ================================================================================ STEP.135(UUT Test seq.135) : Noise Test(Load 11 (+5V +3.3V FL, +12V) (Load PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.000 0.030 ******* 0.0125 3.3V 27.270 0.030 ******* 0.0063 -12V 0.000 0.040 ******* 0.0133 5VSB 0.000 0.040 ******* 0.0052 12V6 93.350 0.040 ******* 0.0012 ================================================================================ STEP.136(UUT Test seq.136) : Noise Test(Load 11 (+5V +3.3V FL, +12V) (Load PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.000 0.030 ******* 0.0121 3.3V 27.270 0.030 ******* 0.0057 -12V 0.000 0.040 ******* 0.0133 5VSB 0.000 0.040 ******* 0.0053 12V6 110.000 0.040 ******* 0.0015 ================================================================================ STEP.137(UUT Test seq.137) : Noise Test(Load (Load C 5V) 90Vac) ---- (2'016 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0063 3.3V 9.090 0.030 ******* 0.0034 -12V 0.000 0.040 ******* 0.0065 5VSB 0.000 0.040 ******* 0.0036 12V6 76.650 0.040 ******* 0.0012 ================================================================================ STEP.138(UUT Test seq.138) : Noise Test(Load (Load C 5V) 100Vac) ---- (2'00 PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0055 3.3V 9.090 0.030 ******* 0.0023 -12V 0.000 0.040 ******* 0.0062 5VSB 0.000 0.040 ******* 0.0023 12V6 93.350 0.040 ******* 0.0013 ================================================================================ STEP.139(UUT Test seq.139) : Noise Test(Load (Load C 5V) 110Vac) ---- (2'01 PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0054 3.3V 9.090 0.030 ******* 0.0027 -12V 0.000 0.040 ******* 0.0058 5VSB 0.000 0.040 ******* 0.0024 12V6 110.000 0.040 ******* 0.0014 ================================================================================ STEP.140(UUT Test seq.140) : Noise Test(Load (Load C 3.3V) 90Vac) ---- (2'0 PASS Vin (V)= 90.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0135 3.3V 30.000 0.030 ******* 0.0071 -12V 0.000 0.040 ******* 0.0148 5VSB 0.000 0.040 ******* 0.0053 12V6 76.650 0.040 ******* 0.0013 ================================================================================ STEP.141(UUT Test seq.141) : Noise Test(Load (Load C 3.3V) 100Vac) ---- (2' PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0136 3.3V 30.000 0.030 ******* 0.0066 -12V 0.000 0.040 ******* 0.0155 5VSB 0.000 0.040 ******* 0.0055 12V6 93.350 0.040 ******* 0.0012 ================================================================================ STEP.142(UUT Test seq.142) : Noise Test(Load (Load C 3.3V) 110Vac) ---- (2' PASS Vin (V)= 110.00 Fin (Hz)= 47.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0134 3.3V 30.000 0.030 ******* 0.0060 -12V 0.000 0.040 ******* 0.0155 5VSB 0.000 0.040 ******* 0.0056 12V6 110.000 0.040 ******* 0.0014 ================================================================================ STEP.143(UUT Test seq.143) : Static Test ---- (5'187) --------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.808 3.3V 3.349 3.250 3.315 ******* ******* 3.806 -12V -12.360 -11.640 -12.040 ******* ******* 0.143 5VSB 5.150 4.850 4.990 ******* ******* 0.621 12V6 12.120 11.880 12.022 ******* ******* 21.994 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.90 ================================================================================ STEP.144(UUT Test seq.144) : Noise Test(Min Load (Load A) 264Vac) ---- (6'0 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0027 3.3V 0.000 0.030 ******* 0.0029 -12V 0.000 0.040 ******* 0.0025 5VSB 0.000 0.040 ******* 0.0017 12V6 0.000 0.040 ******* 0.0025 ================================================================================ STEP.145(UUT Test seq.145) : Noise Test(10% Load 264Vac) ---- (2'000) ----- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 1.910 0.030 ******* 0.0023 3.3V 1.910 0.030 ******* 0.0036 -12V 0.070 0.040 ******* 0.0031 5VSB 0.310 0.040 ******* 0.0017 12V6 11.000 0.040 ******* 0.0009 ================================================================================ STEP.146(UUT Test seq.146) : Noise Test(80+ 20% Load 264Vac) ---- (2'032) - PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 3.810 0.030 ******* 0.0024 3.3V 3.810 0.030 ******* 0.0012 -12V 0.140 0.040 ******* 0.0043 5VSB 0.620 0.040 ******* 0.0021 12V6 21.950 0.040 ******* 0.0005 ================================================================================ STEP.147(UUT Test seq.147) : Noise Test(25% Load 264Vac) ---- (2'031) ----- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 4.760 0.030 ******* 0.0053 3.3V 4.760 0.030 ******* 0.0011 -12V 0.180 0.040 ******* 0.0047 5VSB 0.770 0.040 ******* 0.0042 12V6 27.450 0.040 ******* 0.0008 ================================================================================ STEP.148(UUT Test seq.148) : Noise Test(80+ 50% Load 264Vac) ---- (2'000) - PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 9.530 0.030 ******* 0.0050 3.3V 9.530 0.030 ******* 0.0024 -12V 0.350 0.040 ******* 0.0071 5VSB 1.540 0.040 ******* 0.0036 12V6 54.900 0.040 ******* 0.0010 ================================================================================ STEP.149(UUT Test seq.149) : Noise Test(75% Load 264Vac) ---- (2'031) ----- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 14.290 0.030 ******* 0.0068 3.3V 14.290 0.030 ******* 0.0026 -12V 0.530 0.040 ******* 0.0093 5VSB 2.310 0.040 ******* 0.0042 12V6 82.400 0.040 ******* 0.0010 ================================================================================ STEP.150(UUT Test seq.150) : Noise Test(80+ 100% Load 264Vac) ---- (2'032) PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 19.060 0.030 ******* 0.0093 3.3V 19.060 0.030 ******* 0.0043 -12V 0.700 0.040 ******* 0.0115 5VSB 3.080 0.040 ******* 0.0054 12V6 109.850 0.040 ******* 0.0012 ================================================================================ STEP.151(UUT Test seq.151) : Noise Test(12V Full Load 264Vac (Load D)) ---- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0027 3.3V 0.000 0.030 ******* 0.0014 -12V 0.000 0.040 ******* 0.0036 5VSB 0.000 0.040 ******* 0.0036 12V6 125.000 0.040 ******* 0.0012 ================================================================================ STEP.152(UUT Test seq.152) : Noise Test(Peak Load 230Vac) ---- (2'016) ---- PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 19.060 0.030 ******* 0.0094 3.3V 19.060 0.030 ******* 0.0041 -12V 0.700 0.040 ******* 0.0115 5VSB 3.080 0.040 ******* 0.0056 12V6 122.350 0.040 ******* 0.0014 ================================================================================ STEP.153(UUT Test seq.153) : Noise Test(Load 1 (+5V FL) 264Vac) ---- (2'047 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0060 3.3V 9.090 0.030 ******* 0.0022 -12V 0.800 0.040 ******* 0.0077 5VSB 3.500 0.040 ******* 0.0039 12V6 107.750 0.040 ******* 0.0012 ================================================================================ STEP.154(UUT Test seq.154) : Noise Test(Load 2 (+3.3V FL) 264Vac) ---- (1'9 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0147 3.3V 30.000 0.030 ******* 0.0068 -12V 0.800 0.040 ******* 0.0167 5VSB 3.500 0.040 ******* 0.0077 12V6 107.750 0.040 ******* 0.0013 ================================================================================ STEP.155(UUT Test seq.155) : Noise Test(Load 3 (-12V Min Load) 264Vac) ---- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0024 3.3V 0.000 0.030 ******* 0.0010 -12V 0.000 0.040 ******* 0.0034 5VSB 0.000 0.040 ******* 0.0034 12V6 125.000 0.040 ******* 0.0012 ================================================================================ STEP.156(UUT Test seq.156) : Noise Test(Load 4 (+5V +3.3V FL, 0A) (Load B) PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.000 0.030 ******* 0.0124 3.3V 27.270 0.030 ******* 0.0047 -12V 0.000 0.040 ******* 0.0139 5VSB 0.000 0.040 ******* 0.0044 12V6 0.000 0.040 ******* 0.0015 ================================================================================ STEP.157(UUT Test seq.157) : Noise Test(Load (Load B 5V) 264Vac) ---- (2'00 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0049 3.3V 9.091 0.030 ******* 0.0016 -12V 0.000 0.040 ******* 0.0060 5VSB 0.000 0.040 ******* 0.0021 12V6 0.000 0.040 ******* 0.0016 ================================================================================ STEP.158(UUT Test seq.158) : Noise Test(Load (Load B 3.3V) 264Vac) ---- (2' PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0142 3.3V 30.000 0.030 ******* 0.0067 -12V 0.000 0.040 ******* 0.0153 5VSB 0.000 0.040 ******* 0.0050 12V6 0.000 0.040 ******* 0.0014 ================================================================================ STEP.159(UUT Test seq.159) : Noise Test(Load 5 (+5V FL, 0A) 264Vac) ---- (1 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0030 3.3V 0.000 0.030 ******* 0.0015 -12V 0.000 0.040 ******* 0.0021 5VSB 0.000 0.040 ******* 0.0012 12V6 0.000 0.040 ******* 0.0014 ================================================================================ STEP.160(UUT Test seq.160) : Noise Test(Load 6 (+3.3V FL, 0A) 264Vac) ---- PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0140 3.3V 30.000 0.030 ******* 0.0063 -12V 0.000 0.040 ******* 0.0149 5VSB 0.000 0.040 ******* 0.0050 12V6 0.000 0.040 ******* 0.0014 ================================================================================ STEP.161(UUT Test seq.161) : Noise Test(Load 7 (INTEL C6) 264Vac) ---- (1'9 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 5.000 0.030 ******* 0.0029 3.3V 5.000 0.030 ******* 0.0019 -12V 0.000 0.040 ******* 0.0042 5VSB 0.000 0.040 ******* 0.0014 12V6 0.000 0.040 ******* 0.0011 ================================================================================ STEP.162(UUT Test seq.162) : Noise Test(Load 9 (-12V FL) 264Vac) ---- (1'98 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0028 3.3V 0.000 0.030 ******* 0.0027 -12V 0.800 0.040 ******* 0.0048 5VSB 0.000 0.040 ******* 0.0019 12V6 0.000 0.040 ******* 0.0005 ================================================================================ STEP.163(UUT Test seq.163) : Noise Test(Load 10 (+12V FL, 0A) (Load E) 264V PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 0.000 0.030 ******* 0.0028 3.3V 0.000 0.030 ******* 0.0018 -12V 0.000 0.040 ******* 0.0033 5VSB 0.000 0.040 ******* 0.0037 12V6 125.000 0.040 ******* 0.0013 ================================================================================ STEP.164(UUT Test seq.164) : Noise Test(Load 11 (+5V +3.3V FL, +12V) (Load PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 18.000 0.030 ******* 0.0121 3.3V 27.270 0.030 ******* 0.0047 -12V 0.000 0.040 ******* 0.0132 5VSB 0.000 0.040 ******* 0.0049 12V6 110.000 0.040 ******* 0.0012 ================================================================================ STEP.165(UUT Test seq.165) : Noise Test(Load (Load C 5V) 264Vac) ---- (1'98 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 30.000 0.030 ******* 0.0050 3.3V 9.090 0.030 ******* 0.0014 -12V 0.000 0.040 ******* 0.0052 5VSB 0.000 0.040 ******* 0.0021 12V6 110.000 0.040 ******* 0.0012 ================================================================================ STEP.166(UUT Test seq.166) : Noise Test(Load (Load C 3.3V) 264Vac) ---- (1' PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 1000.00 Load Noise Range Noise B.W Name (V) (MHz) ------------- ----------- --------- 5V 0.400 20.00 3.3V 0.400 20.00 -12V 0.400 20.00 5VSB 0.400 20.00 12V6 0.400 20.00 Load Loading Vpp Noise Vpp Noise Vpp Noise Name (A/Ohm/V) Max Min (V) ------------- --------- --------- --------- -------- 5V 16.200 0.030 ******* 0.0133 3.3V 30.000 0.030 ******* 0.0050 -12V 0.000 0.040 ******* 0.0146 5VSB 0.000 0.040 ******* 0.0053 12V6 110.000 0.040 ******* 0.0013 ================================================================================ STEP.167(UUT Test seq.167) : Sync Dynamic Test_2(15% 50Hz Sync Step at 20% PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 0.00 Measurement Time (ms) = 500.00 Duration-1 (ms)= 10.00 Duration-2 (ms)= 10.00 Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 3.810 8.310 1.0000 1.0000 3.3V 3.810 8.310 1.0000 1.0000 -12V 0.140 0.140 0.1000 0.1000 5VSB 0.620 0.620 0.1000 0.1000 12V6 21.950 40.700 1.0000 1.0000 Load Vpk Max Vpk Min Vpk High Vpk Low Name (V) (V) (V) (V) ------------- --------- --------- --------- --------- 5V 5.250 4.750 <5.250 >4.750 3.3V 3.465 3.135 <3.465 >3.135 -12V -13.200 -10.800 <-13.200 >-10.800 5VSB 5.250 4.750 <5.250 >4.750 12V6 12.600 11.400 <12.600 >11.400 ================================================================================ STEP.168(UUT Test seq.168) : Sync Dynamic Test_2(15% 50Hz Sync Step at 20% PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 0.00 Measurement Time (ms) = 500.00 Duration-1 (ms)= 10.00 Duration-2 (ms)= 10.00 Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 3.810 8.310 1.0000 1.0000 3.3V 3.810 8.310 1.0000 1.0000 -12V 0.140 0.140 0.1000 0.1000 5VSB 0.620 0.620 0.1000 0.1000 12V6 21.950 40.700 1.0000 1.0000 Load Vpk Max Vpk Min Vpk High Vpk Low Name (V) (V) (V) (V) ------------- --------- --------- --------- --------- 5V 5.250 4.750 <5.250 >4.750 3.3V 3.465 3.135 <3.465 >3.135 -12V -13.200 -10.800 <-13.200 >-10.800 5VSB 5.250 4.750 <5.250 >4.750 12V6 12.600 11.400 <12.600 >11.400 ================================================================================ STEP.169(UUT Test seq.169) : Sync Dynamic Test_2(15% 50Hz Sync Step at 50% PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 0.00 Measurement Time (ms) = 500.00 Duration-1 (ms)= 10.00 Duration-2 (ms)= 10.00 Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 9.530 14.030 1.0000 1.0000 3.3V 9.530 14.030 1.0000 1.0000 -12V 0.350 0.350 0.1000 0.1000 5VSB 1.540 1.540 0.1000 0.1000 12V6 54.900 73.650 1.0000 1.0000 Load Vpk Max Vpk Min Vpk High Vpk Low Name (V) (V) (V) (V) ------------- --------- --------- --------- --------- 5V 5.250 4.750 <5.250 >4.750 3.3V 3.465 3.135 <3.465 >3.135 -12V -13.200 -10.800 <-13.200 >-10.800 5VSB 5.250 4.750 <5.250 >4.750 12V6 12.600 11.400 <12.600 >11.400 ================================================================================ STEP.170(UUT Test seq.170) : Sync Dynamic Test_2(15% 50Hz Sync Step at 50% PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 0.00 Measurement Time (ms) = 500.00 Duration-1 (ms)= 10.00 Duration-2 (ms)= 10.00 Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 9.530 14.030 1.0000 1.0000 3.3V 9.530 14.030 1.0000 1.0000 -12V 0.350 0.350 0.1000 0.1000 5VSB 1.540 1.540 0.1000 0.1000 12V6 54.900 73.650 1.0000 1.0000 Load Vpk Max Vpk Min Vpk High Vpk Low Name (V) (V) (V) (V) ------------- --------- --------- --------- --------- 5V 5.250 4.750 <5.250 >4.750 3.3V 3.465 3.135 <3.465 >3.135 -12V -13.200 -10.800 <-13.200 >-10.800 5VSB 5.250 4.750 <5.250 >4.750 12V6 12.600 11.400 <12.600 >11.400 ================================================================================ STEP.171(UUT Test seq.171) : Sync Dynamic Test_2(15% 50Hz Sync Step at 85% PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 0.00 Measurement Time (ms) = 500.00 Duration-1 (ms)= 10.00 Duration-2 (ms)= 10.00 Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 14.560 19.060 1.0000 1.0000 3.3V 14.560 19.060 1.0000 1.0000 -12V 0.700 0.700 0.1000 0.1000 5VSB 3.080 3.080 0.1000 0.1000 12V6 91.100 109.850 1.0000 1.0000 Load Vpk Max Vpk Min Vpk High Vpk Low Name (V) (V) (V) (V) ------------- --------- --------- --------- --------- 5V 5.250 4.750 <5.250 >4.750 3.3V 3.465 3.135 <3.465 >3.135 -12V -13.200 -10.800 <-13.200 >-10.800 5VSB 5.250 4.750 <5.250 >4.750 12V6 12.600 11.400 <12.600 >11.400 ================================================================================ STEP.172(UUT Test seq.172) : Sync Dynamic Test_2(15% 50Hz Sync Step at 85% PASS Vin (V)= 230.00 Fin (Hz)= 50.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 0.00 Measurement Time (ms) = 500.00 Duration-1 (ms)= 10.00 Duration-2 (ms)= 10.00 Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 14.560 19.060 1.0000 1.0000 3.3V 14.560 19.060 1.0000 1.0000 -12V 0.700 0.700 0.1000 0.1000 5VSB 3.080 3.080 0.1000 0.1000 12V6 91.100 109.850 1.0000 1.0000 Load Vpk Max Vpk Min Vpk High Vpk Low Name (V) (V) (V) (V) ------------- --------- --------- --------- --------- 5V 5.250 4.750 <5.250 >4.750 3.3V 3.465 3.135 <3.465 >3.135 -12V -13.200 -10.800 <-13.200 >-10.800 5VSB 5.250 4.750 <5.250 >4.750 12V6 12.600 11.400 <12.600 >11.400 ================================================================================ STEP.173(UUT Test seq.173) : Sync Dynamic Test(PG Verification) ---- (10'73 PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 10000.00 Duration-1 (ms)= 1.000 Duration-2 (ms)= 1.000 Test Channel = 5 Result Message: Success Load Loading-1 Loading-2 Rise Rate Fall Rate Name (A) (A) (A/us) (A/us) ------------- --------- --------- --------- --------- 5V 1.910 19.060 1.0000 1.0000 3.3V 1.910 19.060 1.0000 1.0000 -12V 0.070 0.700 0.1000 0.1000 5VSB 0.310 3.080 0.1000 0.1000 12V6 11.000 109.850 1.0000 1.0000 Max Min Reading(High) Reading(Low) --------- --------- --------- -------------- -------------- Vpp (V) ********* 0.000 Vpk (V) ********* ********* 0.000 0.000 ================================================================================ STEP.174(UUT Test seq.174) : Static Test ---- (5'203) --------------------- PASS Vin (V)= 115.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 Load Loading Name (A/Ohm/V) ------------- ---------- 5V 3.810 3.3V 3.810 -12V 0.140 5VSB 0.620 12V6 21.950 Load Vout Vout Vout Iout Iout Iout Name Max Min (V) Max Min (A) ------------- ------- ------- ------- ------- ------- ------- 5V 5.075 4.925 5.003 ******* ******* 3.808 3.3V 3.349 3.250 3.313 ******* ******* 3.808 -12V -12.360 -11.640 -12.040 ******* ******* 0.143 5VSB 5.150 4.850 4.990 ******* ******* 0.622 12V6 12.120 11.880 12.022 ******* ******* 21.994 Max Min Reading ------------- --------- --------- --------- Pout (W) ******* ******* 300.90 ================================================================================ STEP.175(UUT Test seq.175) : Over Load Protection Test(+12V 90Vac) ---- (30 PASS Vin (V)= 90.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 11.400 OLP Test Channel= 5 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 91.670 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 91.670 175.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 156.250 91.670 138.670 ================================================================================ STEP.176(UUT Test seq.176) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.177(UUT Test seq.177) : TTL & Relay Setup((Switch on)) ---- (3'875) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.178(UUT Test seq.178) : Over Load Protection Test(+12V 100Vac) ---- (2 PASS Vin (V)= 100.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 11.400 OLP Test Channel= 5 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 108.330 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 108.330 175.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 156.250 108.330 138.330 ================================================================================ STEP.179(UUT Test seq.179) : TTL & Relay Setup((Switch off)) ---- (3'844) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.180(UUT Test seq.180) : TTL & Relay Setup((Switch on)) ---- (3'812) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.181(UUT Test seq.181) : Over Load Protection Test(+12V 110Vac) ---- (1 PASS Vin (V)= 110.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 11.400 OLP Test Channel= 5 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 125.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 125.000 175.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 156.250 137.500 140.000 ================================================================================ STEP.182(UUT Test seq.182) : TTL & Relay Setup((Switch off)) ---- (3'813) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.183(UUT Test seq.183) : TTL & Relay Setup((Switch on)) ---- (3'844) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.184(UUT Test seq.184) : Over Load Protection Test(+5V 90Vac) ---- (27' PASS Vin (V)= 90.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 4.750 OLP Test Channel= 1 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 0.000 50.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 50.000 30.000 42.500 ================================================================================ STEP.185(UUT Test seq.185) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.186(UUT Test seq.186) : TTL & Relay Setup((Switch on)) ---- (3'828) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.187(UUT Test seq.187) : Over Load Protection Test(+3.3V 90Vac) ---- (2 PASS Vin (V)= 90.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 3.140 OLP Test Channel= 2 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 0.000 50.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 50.000 30.000 42.000 ================================================================================ STEP.188(UUT Test seq.188) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.189(UUT Test seq.189) : TTL & Relay Setup((Switch on)) ---- (3'829) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.190(UUT Test seq.190) : Over Load Protection Test(-12V 90Vac) ---- (10 PASS Vin (V)= 90.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 11.400 OLP Test Channel= 3 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 0.000 10.000 0.200 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 10.000 0.800 1.800 ================================================================================ STEP.191(UUT Test seq.191) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.192(UUT Test seq.192) : TTL & Relay Setup((Switch on)) ---- (3'829) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.193(UUT Test seq.193) : Over Load Protection Test(+12V 264Vac) ---- (1 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 11.400 OLP Test Channel= 5 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 125.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 125.000 175.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 156.250 137.500 145.000 ================================================================================ STEP.194(UUT Test seq.194) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.195(UUT Test seq.195) : TTL & Relay Setup((Switch on)) ---- (3'812) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.196(UUT Test seq.196) : Over Load Protection Test(+5V 264Vac) ---- (27 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 4.750 OLP Test Channel= 1 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 0.000 50.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 50.000 30.000 42.500 ================================================================================ STEP.197(UUT Test seq.197) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.198(UUT Test seq.198) : TTL & Relay Setup((Switch on)) ---- (3'844) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.199(UUT Test seq.199) : Over Load Protection Test(+3.3V 264Vac) ---- ( PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 3.140 OLP Test Channel= 2 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 0.000 50.000 0.500 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 50.000 30.000 42.500 ================================================================================ STEP.200(UUT Test seq.200) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.201(UUT Test seq.201) : TTL & Relay Setup((Switch on)) ---- (3'828) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.202(UUT Test seq.202) : Over Load Protection Test(-12V 264Vac) ---- (1 PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Recovery Time Out (ms)= 3000.00 Volp (V)= 1.000 Recovery Voltage (V)= 11.400 OLP Test Channel= 3 UUT Type = 1 (0:Auto Recovery, 1:Power Off Reset) Testing Message: OLP Working Load Loading Name (A/Ohm/V) ------------- ---------- 5V 0.000 3.3V 0.000 -12V 0.000 5VSB 0.000 12V6 0.000 Loading Loading Loading Loading Start End Step Recovery ------------- ---------- ---------- ---------- 0.000 10.000 0.200 0.000 Max Min Reading -------------------- ---------- ---------- ---------- OLP Trip Point (A) 10.000 0.800 1.800 ================================================================================ STEP.203(UUT Test seq.203) : TTL & Relay Setup((Switch off)) ---- (3'828) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.204(UUT Test seq.204) : TTL & Relay Setup((Switch on)) ---- (3'828) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.205(UUT Test seq.205) : Over Power Protection Test(+12V Rail 90Vac) -- PASS Vin (V)= 90.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time(ms)= 10.00 Meas Delay After OPP(ms)= 1000.00 Step No. = 50 Step Time (ms)= 1000.00 Trigger Source = 0 (0:Load, 1:Mux) Trigger Slope = 1 (0:Rise, 1:Fall) Trigger Index = 5 Vtrig (V)= 10.000 Testing Message: OPP working Load Loading Loading Loading Vdisable Vdisable Vdisable Name Start End Recovery Max Min (V) ------------- --------- --------- --------- ------- ------- ------- 5V 18.500 18.500 1.000 ******* ******* 0.000 3.3V 18.500 18.500 1.000 ******* ******* 0.000 -12V 0.500 0.500 0.100 ******* ******* -0.002 5VSB 2.500 2.500 0.100 5.150 4.850 5.003 12V6 0.200 175.000 0.200 ******* ******* 0.112 Max Min Reading ------------- --------- --------- --------- OPP Point(W) 1875.00 ******** 1651.91 Iinpk+ (A) ****** ****** 0.21 Iinpk- (A) ****** ****** 0.22 MUX/VDC : 0:None,1:MUX,2:VDC Meas Func: 0:Vac,1:Vdc,7:Freq Ext MUX/ MUX Meas Spec Spec Meas Meas VDC Index Func Max Min Value ----- ---- ----- ---- -------- -------- -------- 1 1 0 1 ******** ******** 0.000 2 1 0 1 ******** ******** 0.000 3 1 0 1 ******** ******** 0.000 4 1 0 1 ******** ******** 0.000 5 1 0 1 ******** ******** 0.000 6 1 0 1 ******** ******** 0.000 7 1 0 1 ******** ******** 0.000 8 1 0 1 ******** ******** 0.000 9 1 0 1 ******** ******** 0.000 10 1 0 1 ******** ******** 0.000 ================================================================================ STEP.206(UUT Test seq.206) : TTL & Relay Setup((Switch off)) ---- (3'844) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.207(UUT Test seq.207) : TTL & Relay Setup((Switch on)) ---- (3'829) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.208(UUT Test seq.208) : Over Power Protection Test(+12V Rail 264Vac) - PASS Vin (V)= 264.00 Fin (Hz)= 63.00 Delay Time (ms)= 5000.00 UUT Off Time(ms)= 10.00 Meas Delay After OPP(ms)= 1000.00 Step No. = 50 Step Time (ms)= 1000.00 Trigger Source = 0 (0:Load, 1:Mux) Trigger Slope = 1 (0:Rise, 1:Fall) Trigger Index = 5 Vtrig (V)= 10.000 Testing Message: OPP working Load Loading Loading Loading Vdisable Vdisable Vdisable Name Start End Recovery Max Min (V) ------------- --------- --------- --------- ------- ------- ------- 5V 18.500 18.500 1.000 ******* ******* 0.000 3.3V 18.500 18.500 1.000 ******* ******* 0.000 -12V 0.500 0.500 0.100 ******* ******* -0.002 5VSB 2.500 2.500 0.100 5.150 4.850 5.003 12V6 0.200 175.000 0.200 ******* ******* 0.110 Max Min Reading ------------- --------- --------- --------- OPP Point(W) 1875.00 ******** 1778.95 Iinpk+ (A) ****** ****** 0.79 Iinpk- (A) ****** ****** 0.77 MUX/VDC : 0:None,1:MUX,2:VDC Meas Func: 0:Vac,1:Vdc,7:Freq Ext MUX/ MUX Meas Spec Spec Meas Meas VDC Index Func Max Min Value ----- ---- ----- ---- -------- -------- -------- 1 1 0 1 ******** ******** 0.000 2 1 0 1 ******** ******** 0.000 3 1 0 1 ******** ******** 0.000 4 1 0 1 ******** ******** 0.000 5 1 0 1 ******** ******** 0.000 6 1 0 1 ******** ******** 0.000 7 1 0 1 ******** ******** 0.000 8 1 0 1 ******** ******** 0.000 9 1 0 1 ******** ******** 0.000 10 1 0 1 ******** ******** 0.000 ================================================================================ STEP.209(UUT Test seq.209) : TTL & Relay Setup((Switch off)) ---- (3'844) - PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 00 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.210(UUT Test seq.210) : TTL & Relay Setup((Switch on)) ---- (3'828) -- PASS Delay Time (ms) = 3000 TTL State 1 = 0000 TTL State 2 = 0100 Relay State 1 = 00 Relay State 2 = 01 TTL Change State Delay (ms) = 200 Relay Change State Delay (ms) = 200 ================================================================================ STEP.211(UUT Test seq.211) : Cycle Dropout Test_2(16mSec AC line Voltage Dr PASS Vin (V)= 115.00 Fin (Hz)= 47.00 Delay Time (ms)= 5000.00 Drop Start Phase (ms)= 4.17 Drop Time (ms)= 16.00 Drop Recovery Time(ms)= 0.00 Load Loading Vpk Max Vpk Min Vpk High Vpk Low Name (A/Ohm/V) (V) (V) (V) (V) ------------- ----------- --------- --------- --------- --------- 5V 19.060 5.075 4.925 <5.075 >4.925 3.3V 19.060 3.349 3.250 <3.349 >3.250 -12V 0.700 -12.360 -11.640 <-12.360 >-11.640 5VSB 3.080 5.150 4.850 <5.150 >4.850 12V6 109.850 12.120 11.880 <12.120 >11.880 ================================================================================ STEP.212(UUT Test seq.212) : Vin Ramp Shut Down Test(Vac turn off 1500W) -- PASS Vin start (V)= 115.00 Vin end (V)= 0.00 Vin step (V)= 1.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Meas Delay After Tripped(ms)= 200.00 Trigger Source = 0 (0:Load, 1:Mux) Trigger Slope = 1 (0:Rise, 1:Fall) Trigger Index = 5 Vtrig (V)= 11.400 Testing Message: Trigger condition occurs Load Loading Name (A/Ohm/V) ------------- ---------- 5V 19.060 3.3V 19.060 -12V 0.700 5VSB 3.080 12V6 109.850 Load Vout Pre Vout Pre Vout Pre Vout Pos Vout Pos Vout Pos Name Max Min (V) Max Min (V) ------------- -------- -------- -------- -------- -------- -------- 5V 5.075 4.925 5.008 ******* ******* 0.000 3.3V 3.349 3.250 3.315 ******* ******* 0.000 -12V -12.360 -11.640 -12.063 ******* ******* -0.002 5VSB 5.150 4.850 4.950 5.150 4.850 4.980 12V6 12.120 11.880 12.072 ******* ******* 0.000 Max Min Reading ------------- --------- --------- --------- Vin Trip (V) 105.00 60.00 77.00 ================================================================================ STEP.213(UUT Test seq.213) : Vin Ramp Shut Down Test(Vac turn off 1300W) -- PASS Vin start (V)= 115.00 Vin end (V)= 0.00 Vin step (V)= 1.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Meas Delay After Tripped(ms)= 200.00 Trigger Source = 0 (0:Load, 1:Mux) Trigger Slope = 1 (0:Rise, 1:Fall) Trigger Index = 5 Vtrig (V)= 11.400 Testing Message: Trigger condition occurs Load Loading Name (A/Ohm/V) ------------- ---------- 5V 18.710 3.3V 18.710 -12V 0.690 5VSB 3.020 12V6 93.450 Load Vout Pre Vout Pre Vout Pre Vout Pos Vout Pos Vout Pos Name Max Min (V) Max Min (V) ------------- -------- -------- -------- -------- -------- -------- 5V 5.075 4.925 5.008 ******* ******* 0.000 3.3V 3.349 3.250 3.315 ******* ******* 0.000 -12V -12.360 -11.640 -12.060 ******* ******* -0.002 5VSB 5.150 4.850 4.950 5.150 4.850 4.983 12V6 12.120 11.880 12.067 ******* ******* 0.000 Max Min Reading ------------- --------- --------- --------- Vin Trip (V) 95.00 60.00 72.00 ================================================================================ STEP.214(UUT Test seq.214) : Vin Ramp Shut Down Test(Vac turn off 1100W) -- PASS Vin start (V)= 115.00 Vin end (V)= 0.00 Vin step (V)= 1.00 Fin (Hz)= 60.00 Delay Time (ms)= 5000.00 UUT Off Time (s)= 3.00 Step Time (ms)= 200.00 Meas Delay After Tripped(ms)= 200.00 Trigger Source = 0 (0:Load, 1:Mux) Trigger Slope = 1 (0:Rise, 1:Fall) Trigger Index = 5 Vtrig (V)= 11.400 Testing Message: Trigger condition occurs Load Loading Name (A/Ohm/V) ------------- ---------- 5V 18.250 3.3V 18.250 -12V 0.670 5VSB 2.950 12V6 77.150 Load Vout Pre Vout Pre Vout Pre Vout Pos Vout Pos Vout Pos Name Max Min (V) Max Min (V) ------------- -------- -------- -------- -------- -------- -------- 5V 5.075 4.925 5.005 ******* ******* 0.000 3.3V 3.349 3.250 3.315 ******* ******* 0.000 -12V -12.360 -11.640 -12.055 ******* ******* -0.002 5VSB 5.150 4.850 4.950 5.150 4.850 4.985 12V6 12.120 11.880 12.057 ******* ******* 0.000 Max Min Reading ------------- --------- --------- --------- Vin Trip (V) 85.00 60.00 71.00 ================================================================================ STEP.215(UUT Test seq.215) : Vin Ramp Start Up Test(Vac turn on 1100W) ---- PASS Vin start (V)= 0.00 Vin end (V)= 115.00 Vin step (V)= 1.00 Fin (Hz)= 60.00 UUT Off Time (s)= 3.00 Delay Time (ms)= 5000.00 Step Time (ms)= 200.00 Meas Delay After Tripped(ms)= 200.00 Trigger Source = 0 (0:Load, 1:Mux) Trigger Slope = 0 (0:Rise, 1:Fall) Trigger Index = 5 Vtrig (V)= 11.400 Testing Message: Trigger condition occurs Load Loading Name (A/Ohm/V) ------------- ---------- 5V 18.250 3.3V 18.250 -12V 0.670 5VSB 2.950 12V6 77.150 Load Vout Pre Vout Pre Vout Pre Vout Pos Vout Pos Vout Pos Name Max Min (V) Max Min (V) ------------- -------- -------- -------- -------- -------- -------- 5V ******* ******* 0.000 5.075 4.925 4.935 3.3V ******* ******* 0.000 3.349 3.250 3.273 -12V ******* ******* -0.002 -12.360 -11.640 -12.055 5VSB 5.150 4.850 4.985 5.150 4.850 4.925 12V6 ******* ******* 0.000 12.120 11.880 12.022 Max Min Reading ------------- --------- --------- --------- Vin Trip (V) 85.00 60.00 83.00 ================================================================================