SOFTPAQ NUMBER:  SP9048
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Prosignia Matrox G100/G200 Video Driver for Windows 95/98 
VERSION:  4.10.007 Rev W
LANGUAGE:  English, French, German, Italian, and Spanish

CATEGORY:  Driver

DIVISION:  Small and Medium Business

PRODUCTS AFFECTED:  Compaq Prosignia models with a Matrox G100 or 
Millennium G200 video controller, including certain models in the 
Prosignia 310 and 330 Series

NOTE:  To determine if your Prosignia model has a Matrox G100 or 
Millennium G200 video controller, go to the Control Panel, select the System 
icon, the Device Manager tab, and the Display Adapters icon.
A Matrox G100 or Millennium G200 controller could also be installed in other 
Prosignia models as an option.  

OPERATING SYSTEM:  Microsoft Windows 95,
                   Microsoft Windows 98

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  December 11, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.1

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the Microsoft Windows 95/98
video driver for the Matrox G100 and Millennium G200 video controllers 
used in the above-mentioned Prosignia computers.  
Optionally creates three installation diskettes.

HOW TO USE:

1. Download the Softpaq to a directory on your hard drive.  The file downloaded is 
a self-extracting executable with the file name based on the Softpaq Number above.

2. From the download directory, execute the SoftPaq.  When executed with no 
parameters, files are extracted into new folders that are created in the current 
directory.   To create the folders in a different directory, specify the complete 
path of the directory as a parameter when executing the SoftPaq:

   SPXXXX <path>

Enter "Y" to confirm and folders are created in the download directory or the 
directory specified.

3. After the folders disk_01, disk_02, and disk_03 have been created, you may 
delete the self-exctracting file downloaded in step 1.

4. The driver may be installed directly from the folders in the download 
directory, or two driver installation diskettes can be created.  

To create installation diskettes, run MAKEDISK.BAT.

To read detailed installation and usage instructions, refer to README.TXT.

5. To install the driver, run SETUP.EXE from the first installation diskette or 
from directory disk_01 if installing from the hard drive.
For example, select Start, Run, then enter:

   <path>\disk_01\setup

   where <path> is the drive and directory chosen in step 2 

6. Follow the on-screen instructions to complete the installation.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.