SOFTPAQ NUMBER:  SP9002
PART NUMBER:  277201-AA3
FILE NAME:  N/A
TITLE:  Deskpro Matrox G100/G200 Video Driver for Windows 95/98 
VERSION:  4.10.007 Rev W
LANGUAGE:  English, Japanese, Simplified Chinese, Traditional Chinese, 
           Korean, Thai

CATEGORY:  Driver

DIVISION:  Desktop

PRODUCTS AFFECTED:  Compaq Deskpro models with a Matrox G100 or 
Millennium G200 video controller, including certain models in the 
Deskpro EN Series and Deskpro EP Series

NOTE:  To determine if your Deskpro EN or EP model has a Matrox G100 or 
Millennium G200 video controller, go to the Control Panel, select the 
System icon, the Device Manager tab, and the Display Adapters icon.
These Matrox video controllers could also be installed in other 
Deskpro models as an option.  

OPERATING SYSTEM:  Microsoft Windows 95,
                   Microsoft Windows 98

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE: December 3, 1998

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 3.x

SUPERSEDES: SP8702

DESCRIPTION:  Unpacks the files needed to install the Microsoft Windows 95/98
video driver for the Matrox G100 and Millennium G200 Video Controllers used 
in the above-mentioned Deskpro computers.  
Optionally creates three installation diskettes.

HOW TO USE:

HOW TO USE:

1. Download the Softpaq to a directory on your hard drive.  The file downloaded is 
a self-extracting executable with the file name based on the Softpaq Number above.

2. From the download directory, execute the SoftPaq.  When executed with no 
parameters, files are extracted into new folders that are created in the current 
directory.   To create the folders in a different directory, specify the complete 
path of the directory as a parameter when executing the SoftPaq:

   SPXXXX <path>

Enter "Y" to confirm and folders are created in the download directory or the 
directory specified.

3. After the folders disk_01, disk_02 and have been created, you may delete the 
self-exctracting file downloaded in step 1.

4. The driver may be installed directly from the folders in the download 
directory, or two driver installation diskettes can be created.  

To create installation diskettes, run MAKEDISK.BAT.

To read detailed installation and usage instructions, refer to README.TXT.

5. To install the driver, run SETUP.EXE from the first installation diskette or 
from directory disk_01 if installing from the hard drive.
For example, select Start, Run, then enter:

   <path>\disk_01\setup

   where <path> is the drive and directory chosen in step 2 

6. Follow the on-screen instructions to complete the installation.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.