SOFTPAQ NUMBER:  SP7047
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.0
        (Servers)
VERSION:  2.07 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:  Compaq ProLiant and ProSignia Servers

OPERATING SYSTEM:  Microsoft Windows NT 4.0(Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  May 20, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6978

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description
file and a self-extracting executable file.  The self-extracting executable 
file contains Compaq Support Software for Microsoft Windows NT 4.0 
that supports the following subsystems and features of Compaq Servers:
 
   Compaq Fibre Channel Storage System
   Compaq Fibre Channel Filter Driver
   Compaq Integrated Management Display Utility 
   Compaq Integrated Management Log Viewer
   Compaq Online Storage Controller Recovery Utility   
   Compaq PCI Hot Plug Utility
   Compaq Power Down Manager
   Compaq Power Supply Viewer
   Compaq ProLiant Storage System 
   Compaq Recovery Server, Standby Agent with SMART-2 Support
   Compaq Recovery Server, Online Agent with SMART-2 Support
   Compaq Remote Insight Board Driver
   Compaq Remote Insight Board WAN Driver
   Compaq Remote Monitor Service
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver   
   Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   NetFlex-3 network adapter monitoring, configuration and duplex utility
   Compaq 10/100 TX Embedded Intel WOL UTP Controller
   Compaq 10/100 TX PCI Intel UTP Controller
   SMART Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board   
 
Enhancements/Fixes:

For details, refer to NTREADME.HLP in the created support files.

The release of the Compaq Support Software for Microsoft Windows NT 4.0, 
Version 2.07 Revision A, the new ELSA GLoria-Synergy + 3D Graphics 
Controller, the new Compaq Ethernet or Fast Ethernet Network Interface 
Controller Drivers, and the new Compaq Professional Workstation AP400.

Compaq Ethernet or Fast Ethernet Network Interface Controller 
Drivers (N100NT.SYS)
  Added support for the new Compaq 10/100 TX Embedded Intel WOL UTP 
  Controller and the Compaq 10/100 TX PCI Intel UTP Controller drivers 
  version 1.50.

Compaq Remote Insight Board Driver (CPQRIB.SYS)
  Updated the Compaq Remote Insight Board driver from version 1.24 to 
  1.25.  This updated driver corrects an issue with the previous 
  Compaq Remote Insight Board driver not loading on a Compaq ProLiant 
  7000 configured with 2.1 GB of memory.  It would only load on a Compaq 
  ProLiant 7000 if the system had less than 2 GB of memory.

Compaq System Management Driver (SYSMGMT.SYS)
  Updated the Compaq System Management driver version from 3.00.01 to 
  3.03.01.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       SRVR.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       SRVR.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.