SOFTPAQ NUMBER:  SP6098
PART NUMBER:  
FILE NAME:  NWCA420b.ZIP
TITLE:  Compaq Insight Management Agents for NetWare
VERSION:  4.20b
LANGUAGE: English 

CATEGORY: Software Solutions 

DIVISIONS: Systems

PRODUCTS AFFECTED: Compaq Servers and Options running under Novell NetWare  

OPERATING SYSTEM:  Novell NetWare 3.12 
		   Novell NetWare 3.2 
		   Novell NetWare 4.x and intraNetWare 
		   Novell Netware 5
		   
SYSTEM CONFIGURATION: 

PREREQUISITES: This requires the Compaq NSSD drivers to be installed.

EFFECTIVE DATE:  11/30/98

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6057
DESCRIPTION:  
	This SoftPaq contains the version 4.20b image of the Insight Management 
Agents for NetWare. 

Enhancements/Fixes:            
	This supports the latest Compaq hardware.  The file WHATSNEW.RDM 
contains more detailed information on Enhancements/Fixes.  That file is 
contained inside the SoftPaq deliverable.

Instructions on how to use this SoftPAQ to install Agents onto a server
-----------------------------------------------------------------------

	This file contains the instructions on how to install the Compaq 
Insight Management Agents for NetWare onto a NetWare server.  The SoftPAQ 
process has left a self-extracting executable file (SP6098.exe)and this 
file (Sp6098.txt) in a subdirectory.  The goal will be for the user to 
run the self-extracting executable on a client machine and install to any 
target server(s) which require the updated agents.  The target server will 
temporarily contain a subdirectory which will be used to house the files used 
by the Compaq Insight Management Agent Installation NLM (CPQAGIN.NLM).  The agent
installation NLM will be run and will copy the files to the proper places
and will configure the agents.  The final step will be to delete the
temporary subdirectory on the target server.

     The following steps provide more detailed information.


Step 1:  Run the INSTALL batch file to copy files to the Target Server.

	Copy this SP6098.TXT and the SP6098.EXE files to a client machine
which has access to the network which contains the target NetWare server
and then map a drive to the server.  Then run the SP6098.EXE file on that
client machine so it installs the necessary files onto the client machine.
Finally, from the client machine, run the INSTALL.BAT file from the command
prompt specifying the drive letter of the target server.  For example, type
	INSTALL M: 
and hit the Enter key (where M: is the target server drive)


Step 2: Run the installation NLM (CPQAGIN.NLM) on the target server.

	Walk over to the target server and run the Compaq Insight Management
Agent Installation NLM in order to install and configure the new Agents.
To do this, type:
      LOAD SYS:\AGENTS\NETWARE\ENG\COMPAQ\CPQAGIN
and hit Enter.

	Next select the option to 'Copy New NetWare Agents to SYS:SYSTEM".
This will copy the files from the temporary subdirectory to the proper
locations.  Once the file copies are complete, follow the instructions
to configure the agents. Once the installation steps are complete, CPQAGIN 
will automatically start the agents.  More detailed information can be found 
in the \AGENTS\NETWARE\ENG\CPQ_AGNT.RDM file residing on the target server.


Step 3:  Verify that the Agents work.

	Use Compaq Insight Manager to verify that the target server can be
seen and that the agents are providing data.


Step 4:  Delete the temporary subdirectory on the target server.

	If desired, the temporary directory on the target server which was used 
to stage the files can be deleted.  Go to a client machine and delete the
\AGENTS folder from the target server.


Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies