SOFTPAQ NUMBER:  SP6020
PART NUMBER:  
FILE NAME:  SETUP.EXE
TITLE:  Networking Management Software PMM for 5411 and 5422 Switches
VERSION:  2.2.1 Rev A
LANGUAGE:  English

CATEGORY:  Comm-Network/Software Solutions

PRODUCTS AFFECTED:  Compaq 5411 and 5422 Enterprise Gigabit Switches

OPERATING SYSTEM:  Microsoft Windows 95;
                   Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  4 August 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  SP6547

PREREQUISITES:  Compaq Networking Management Software Version 2.2.1
Foundation Module available in SoftPaq SP6010, which also lists 
system requirements.

System Requirements:
- 486 or later processor
- 16 MB of RAM minimum (24 MB recommended) for Windows 95
- 32 MB of RAM minimum (48 MB recommended) for Windows NT
- One of the following operating systems:
   - Windows 95
   - Windows NT 4.0 (latest service packs recommended)

DESCRIPTION:  Unpacks a setup file to install a PMM (Product Management
Module) that provides support for the Compaq 5411 and 5422 Enterprise 
Gigabit Switches. It is designed to augment the functionality of the 
Compaq Network Management Software Version 2.2.1 Foundation Module.  
Refer to SoftPaq SP6010 for the Foundation Module and a description of 
the features of Compaq Networking Management Software.  

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
It unpacks 2 files (requiring an additional 3.5 MB of hard drive space):
 SETUP.EXE
 README.TXT

You will be given the opportunity to specify the target directory for 
the files, or default to the download directory.

3. After the files have been unpacked, you may delete the  
self-extracting file downloaded in step 1.

4. The installed PMM requires 10.5 MB hard drive space.  
(The installation process may require up to 50% more disk space
than the final installation; this space is freed when the 
installation is complete).   

5. Run SETUP.EXE and follow the on-screen instructions.

6. After the installation has completed successfully, you may 
delete the SETUP.EXE file.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies