TITLE: HP iPAQ hw6500 Mobile Messenger Series ROM Update - Italian

VERSION: 1.26
DESCRIPTION: 
This package contains the ROM Update Utility (RUU) and ROM image for the 
following HP iPAQ hw6500 Mobile Messengers:

- HP iPAQ hw6510 Mobile Messenger
- HP iPAQ hw6515 Mobile Messenger

NOTE: Confirming the HP iPAQ Mobile Messenger model ID number before starting to
download and install this software package helps to prevent system errors. Use 
either of the following two methods to confirm your HP iPAQ Mobile Messenger 
model ID:

Method 1: Power On the HP iPAQ Mobile Messenger and tap Start, then tap Settings, 
          then tap the System tab, then tap HP Asset Viewer, and then tap the 
          System tab.

Method 2: With the HP iPAQ Mobile Messenger Powered Off, remove the battery cover
          and the battery. The model ID number is printed on a sticker that is 
          located under the battery. Be sure to reinsert the battery promptly to 
          avoid data loss.
  
Before proceeding, ensure that this software package supports the model ID 
identified for your HP iPAQ Mobile Messenger.
             
IMPORTANT: The content of this ROM image is exactly the same as the ROM image 
           in the previous update, version 1.26. If you have already successfully
           updated your HP iPAQ Mobile Messenger to ROM version 1.26, you do not
           need to download and install this SoftPaq.

           This SoftPaq fixes an issue where the ROM Update Utility (RUU) 
           included in the previous release may stop responding at 0.1 percent 
           completion during the update (with no further progress after five 
           minutes). The HP iPAQ Mobile Messsenger remains in the ROM Update 
	   state (Boot Loader Mode) and fails to complete the ROM update.
	   
The RUU is designed to replace the current ROM image and to erase the partnership
and all user data and programs on the HP iPAQ Mobile Messenger. It is important 
to read and understand the information in the Readme file included with this 
update BEFORE installing the software package.

Use ActiveSync to synchronize your personal calendar, contacts, e-mail, tasks, 
and notes data with Microsoft Outlook on a desktop to save this information 
before performing the ROM update. After completing the ROM update, establish a
new ActiveSync partnership with the desktop. The HP iPAQ Mobile Messenger 
synchronizes your personal data from Microsoft Outlook. Reinstall any 
user-installed software programs and additional personal data, if necessary.
	  
NOTE: Due to changes in the registry and system files introduced by the new ROM, 
the new ROM does not recognize a backup file that is generated using the previous
ROM.
             
PURPOSE: Recommended
SOFTPAQ NUMBER: sp33243
SUPERSEDES: sp31954
EFFECTIVE DATE: 26 July 2006
CATEGORY: BIOS 
SSM SUPPORTED: No

PRODUCT TYPE(S): 
Handhelds

HARDWARE PRODUCT MODEL(S):
HP iPAQ hw6510 Mobile Messenger
HP iPAQ hw6515 Mobile Messenger

OPERATING SYSTEM(S): 
Microsoft Windows Mobile 2003 SE - Pocket PC Phone Edition

LANGUAGE(S):
Italian

FIXES:
- Fixes issue where the ROM Update Utility (RUU) stops responding at 0.1 percent
  completion during ROM update (this issue may occur when using the previous
  release, SoftPaq Number SP31954). 

PREREQUISITES: 
- Microsoft ActiveSync 3.8 (or later) is required.

HOW TO USE:

1. Download the SoftPaq .EXE to a directory on your hard drive. 

2. Execute the downloaded file and follow the on-screen instructions to unpack
   the ROM Update files to a directory. (NOTE: This directory should not 
   contain any file or folder from any previous ROM Upgrade.) 

3. Establish an ActiveSync connection between the HP iPAQ Mobile Messenger and 
   the host PC using a USB connection. 

4. RUU.exe starts automatically. Follow the on-screen instructions to complete 
   the ROM upgrade. 

NOTE: Once the update is complete, the .EXE file downloaded in Step 1 can be 
deleted, if desired. 


INSTALLATION NOTES:

1. During the update, the ROM Update Utility:
   - Queries the HP iPAQ Mobile Messenger for current ROM image information.
   - Validates that the new ROM image is compatible with the HP iPAQ Mobile 
     Messenger.
   - Automatically places the HP iPAQ Mobile Messenger in Flash mode.
   - Updates the ROM image on the HP iPAQ Mobile Messenger.

2. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If 
   Standby or Hibernation mode is activated during the upgrade process, a 
   critical error may occur.

3. IMPORTANT: Plan enough time to complete the update. The total time to 
   perform this ROM update is estimated at 30 minutes with a USB connection.
        
4. IMPORTANT: Do not interact with the HP iPAQ Mobile Messenger or remove it from
   AC power or the cradle/cable once the status bar is displayed on the host PC 
   and on the HP iPAQ Mobile Messenger, showing that the actual update has 
   started.

5. If an error message is displayed during the process, follow any available 
   instructions to correct the condition and start the ROM Update Utility 
   again.

6. The update process can be performed while connected to a host PC either as 
   a Guest or with an established partnership.


Copyright (c) 2006 Hewlett-Packard Development Company, L.P.