SOFTPAQ NUMBER:  SP25040
PART NUMBER: 289320-407
FILE NAME:  N/A
TITLE:  Firmware Upgrade Image for the Hewlett-Packard Integrated
        Lights-Out Management Controller

VERSION:  1.55
LANGUAGE:  English

CATEGORY:  Systems Management

DIVISIONS:  Systems

PRODUCTS AFFECTED:      ProLiant BL20p
			ProLiant BL20p G2
			ProLiant BL30p
			ProLiant BL40p
                        ProLiant ML370 G3
                        ProLiant DL360 G2
			ProLiant DL360 G3
			ProLiant DL380 G3
			ProLiant DL560
                        ProLiant DL580 G2
			ProLiant DL585
			ProLiant DL740

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:  May 7, 2004

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES: SP19817 (1.06), SP19846 (1.15), SP21861 (1.16), SP21863 (1.20), 
SP21888 (1.25), SP21938 (1.26), SP21992 (1.27), SP21940 (1.40), SP24873 (1.41),
SP24931 (1.42), SP24920 (1.50), SP25739 (1.51)

DESCRIPTION:   This release provides updated firmware for the latest
               maintenance releases of the Hewlett-Packard Integrated
               Lights-Out Management Controller.  This Softpaq is used
               for remote iLO firmware update via the iLO web-based 
               interface or the iLO XML scripting process.  

New features -

1.  Support added for ProLiant BL30p server.

2.  Added "Static IP Bay Configuration" feature to ease the initial deployment 
    of an entire enclosure, or the subsequent deployment of blades within an existing 
    enclosure. This feature permits the iLO management processor in each blade slot 
    to obtain a predefined IP address without relying on DHCP. iLO is immediately 
    accessible for server deployment using Virtual Media and other remote 
    administration functions.

3.  Enhanced the Virtual Serial Port to operate on Linux operating systems without 
    having to use the Linux 'setserial' command to configure the non-standard IO 
    address of 0x0408 for the serial port. Legacy IO addresses used in Linux by 
    default now function.

4.  Added a simple command set that can be used during telnet Remote Console sessions
    or Virtual Serial Port sessions. Using various key sequences, the server can be
    powered on/off/reset, or the UID light can be turned on/off from the telnet session.


Problems fixed from last release -

1.


Documentation -

1.  The updated iLO User Guide and the Updated Information Booklet can be found by
    following the links at:  

	http://h18013.www1.hp.com/products/servers/management/ilo/documentation.html

    This release is covered by the documentation for the iLO 1.50 release.

2.  Check the online help files for additional information about how to use features.
    Online help files can be accessed from within the browser web pages by clicking
    on the question mark in the upper right-hand corner of each page.

3.  Instructions for using the "Static IP Bay Configuration" can be found
    in the documentation for the ProLiant BL30p server.

4.  Key sequences for simple command set available for use during telnet sessions:

    <CTRL-P 0>	Turn power off (simple press of button)
    <CTRL-P 1>	Turn power on
    <CTRL-P 6>	Perform ACPI shutdown (hold power button for 6 seconds)
    <CTRL-P !>	Perform reboot (immediate power shutdown, followed by power on)
    <CTRL-U 0>	Turn UID light off
    <CTRL-U 1>	Turn UID light on

    Key sequences operate during a telnet remote console session or virtual serial
    port session. The keys will not work before authentication or before the user
    selection of 'r' (remote console) or 's' (virtual serial port). The power
    control requests are correctly ignored when the user does not have the proper
    privilege for power control.

HOW TO USE:

1.  Download the SoftPaq to a directory on your hard drive and change to
    that directory.  The file that is downloaded is SP25040.EXE.

2.  From that drive and directory, execute the SoftPaq file:

SP25040 [ENTER]

3.  After the firmware image is extracted (ILO155.BIN), you may delete
    the downloaded file SP25040.EXE if you wish.

4.  Log in to Integrated Lights-Out with a user ID that has the "Configure
    iLO Settings" privilege.

5.  Select "Upgrade iLO Firmware" from the "Administration" tab.

6.  Send the firmware image (ILO155.BIN) to iLO.  Do not interrupt the
    upgrade process.

Copyright 2003 Hewlett-Packard Development Company, L.P.

Hewlett-Packard and the Hewlett-Packard logo are trademarks of Hewlett-Packard
Development Company, L.P/ in the U.S. and/or other countries.