SOFTPAQ NUMBER:  sp21916
PART NUMBER:  N/A
FILE NAME:  DIVU.exe
TITLE:  Data Integrity Validation Utility (English)
VERSION:  1.14
LANGUAGE:  English

CATEGORY:  Storage Controllers

DIVISIONS: Systems

PRODUCTS AFFECTED:  DL 320G2, ML 310, ML 330G2 -- ATA Version

OPERATING SYSTEM:  Microsoft Windows 2000, Windows Server 2003, 
and NT 4.0

SYSTEM CONFIGURATION: ATA Version Only

PREREQUISITES:  N/A

EFFECTIVE DATE:  TDB

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  Version 5.x

SUPERSEDES:  N/A

DESCRIPTION:  
This application will provide a method by which the customer may 
recover their Integrated ATA RAID configured system from a 
possible non-data redundant state.  

Note:  If at any time during these procedures your server gets 
to a state where it can not boot successfully, please contact hp 
customer support.

The application will update the user's Integrated ATA RAID 
Management Utility to version 2.5.25.08 and the MegaIDE driver
to version 2.5.2002.1107.  


Enhancements/Fixes:  Initial release.


HOW TO USE:
1.  Download the SoftPaq to a directory on your hard drive and change 
    to that directory.

2.  From that drive and directory, execute the softpaq.  You will have
    an option to either install the utility or to extract the utility 
    to your server.

3.  You may now delete the softpaq from your hard drive.



INSTALLATION INSTRUCTIONS:
1.  The aplication will automatically scan your hard drive and 
determine the best action to be completed. 

2.  Following the initial unloading and updating of the Integrated ATA 
RAID Management Utility and the MegaIDE driver, any previously rebuilt 
arrays will automatically be set into a rebuild status.  You will be 
asked if they would like to reboot their system.  Answer yes.

3.  The server will be rebooted and once the OS is up and running one 
of two series of events will occur:

a.  If previous rebuilds wer detected, then the Integrated ATA RAID 
Management Utility will be launched and the previous rebuild completed 
again.  Once this is complete, a concistenecy check will also be 
executed and any unused portions of the drive syncronized.

b.  If no previous rebuilds have been detected, then consistency 
check will be executed and the information on the second drive in 
the IRCD (Integrated RAID Configuration Data) will be synchronized 
with that data on the initial drive.

4.  At this point, the DIVU application is complete and your system's 
data redundency has been restored.


Copyright 2003, Compaq Computer Corporation. All rights reserved. 

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies.