TITLE: iPAQ H3600 Series Pocket PC ROM Update

VERSION: 1.87 (Release 4)
DESCRIPTION: This SoftPaq contains the ROM Upgrade Utility (RUU) and ROM
	     image for the iPAQ H3600 Series Pocket PC. 
             The Utility performs the following:
	
             - Replaces the current ROM image on your device with an updated version.  
             - Backs up your current ROM image, if desired.
             - Restores a previous ROM image, if desired.

NOTES: This ROM Update replaces the current ROM image with ROM image version 1.87.

PURPOSE: Recommended Update
SOFTPAQ NUMBER: SP20012
SUPERSEDES: SP17799, SP16603 (French) 
EFFECTIVE DATE: January 28, 2002
CATEGORY: ROMPaqs and System Software
SSM SUPPORTED: No

PRODUCT TYPE(S): Handhelds

PRODUCT MODEL(S): Compaq iPAQ H3600 Series Pocket PC

OPERATING SYSTEM(S): Microsoft Windows for Pocket PC 2000

LANGUAGE(S): French

ENHANCEMENTS: 
 - Adds Full Duplex Audio Support.
 - Expansion pack interrupts to Wake on Ring.

FIXES:
 - Provides IBM Microdrive recognition.
 - Provides extended battery fault warning message upon Expansion Pack insertion.
 - Provides PCMCIA detection on socket 1 of the Dual Slots Expansion Pack.
 - Fixes connecting issue via serial port to Windows NT 4.0 .
      
PREREQUISITES: N/A

HOW TO USE:

       1. Download the SoftPaq to a directory on your hard drive (NOTE: this
          directory should not contain any file or folder from any previous
          ROM Upgrade).  The file downloaded is a self-extracting executable 
          with a filename based on the SoftPaq Number above.

       2. Execute the downloaded file and follow the on-screen instructions
          to unpacking the ROM Update files to a directory.
         
       3. Excecute the UpgradeUt.exe file to begin the upgrade process and 
          follow the instructions displayed by the ROM Upgrade Utility. 

       4. You may delete the self-extracting file downloaded in step 1 if you wish.

       5. After the installation is completed, you may delete
          the directory created in step 2 if you wish.

INSTALLATION NOTES:

       1. During the upgrade, the ROM Upgrade Utility will:
          - Query your device for current ROM image information.
          - Validate that the new ROM image is compatible with your device.
          - Allow you to back up your current ROM image.
          - Update or restore the ROM image on your device.

       2. Important: Disable the standby and hibernation modes on your
          host PC. If standby or hibernation are activated during the
          upgrade process, a critical error may occur.

       3. The ROM Upgrade Utility requires ActiveSync 3.1 or greater.

       4. Important: Do not interact with your device or remove it from
          the cradle or cable unless instructed to do so. During the
          upgrade process, your device will be reset automatically.

       5. The upgrade process can be performed on a device connecting 
          to a host PC as an established partnership or as a guest.

       6. The upgrade process does not alter data or programs stored in
          RAM. Compaq recommends a device backup before performing a ROM
          upgrade as a precautionary measure. This backup should not be
          used after a successful ROM upgrade. 

       7. A device backup for a particular ROM version may not be compatible 
          with a new ROM version, therefore Compaq recommends 
          performing a device backup directly after a ROM upgrade.

       8. If an error occurs during the installation of
          the ROM Upgrade Utility, follow the instructions displayed in the error 
          dialog box.

       9. If you try to install or restore a ROM image that is not
          compatible with your iPAQ Pocket PC, such as installing
          a French image on an English language unit, you will
          receive an error message. You will be required to go
          back and select another ROM image.

      10. To launch the ROM Upgrade Utility manually, double-click on the file 
          name UpgradeUt.exe.

      11. After a successful ROM Upgrade, all hardware Buttons assignment will
          be returned to the default setting.  Personal preferences will need
          to be reassigned under Settings/Buttons/Program Buttons.

Copyright 2002, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.