TITLE: ROMPaq for Evo Workstation W8000 (686P6 ROM)

VERSION: 1.15 Rev A
DESCRIPTION:
This SoftPaq creates a ROMPaq firmware diskette that can be used to locally restore or 
upgrade the System ROM in the Compaq models below with a 686P6 Family ROM.  A backup of the 
current System ROM will be copied onto the ROMPaq diskette during the flash process.

NOTES: 
The ROM Family and ROM date can be determined by running the Setup Utility by 
pressing F10 on the target computer during system power on of the computer, and viewing 
File/System Information.  This information can be saved into a text file by selecting 
File/Save to Diskette.

PURPOSE: Recommended Update
SOFTPAQ NUMBER: SP19590
SUPERSEDES: SP18886
PART NUMBER: 235639-008
EFFECTIVE DATE: December 21, 2001
CATEGORY: ROMPaqs and System Software
SSM SUPPORTED: No

PRODUCT TYPE(S): Workstations

PRODUCT MODEL(S): Evo Workstation W8000: All Models

OPERATING SYSTEM(S): 
Microsoft Windows XP Professional
Microsoft Windows 2000
Microsoft Windows NT 4.0

LANGUAGE(S): US (Global)

ENHANCEMENTS: 
 - Adds a feature to F10 Setup to allow manual enabling or disabling of hyper-threading
   for CPUs capable of it. When hyper-threading is enabled, the OS will see logical 
   processors. When hyper-threading is disabled, the OS will only see the physical 
   processors.
 - Adds support for 2.2-GHz Prestonia CPUs.
 - If a CPU supports L3 cache, it will now be reported in the SMBIOS table.

FIXES: 
 - Corrects reporting of SCSI hard drives greater than 64 gigabytes in Ctrl-A Setup.

PREREQUISITES: N/A

HOW TO USE:

1.  Obtain a formatted 1.44-MB diskette and place it in your A: drive.

2.  Download the SoftPaq to a directory on your hard drive.  The file that is 
downloaded is an executable with a filename based on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the on-screen 
instructions to build the ROMPaq diskette.

4.  Place the newly created diskette in the A: drive of the computer to be upgraded or 
restored and cycle system power to boot from the ROMPaq diskette.

5.  Follow the on-screen instructions to select the Compaq System ROM and flash the 
firmware.

WARNING:  DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE 
          UPGRADE PROCESS!!!

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.