TITLE: ROM Image for Remote ROM Flash for Compaq Models with a 686P3 Family ROM

VERSION: 3.11 Rev A
DESCRIPTION:
This SoftPaq contains a binary image for the System ROM for the Compaq models below
with a 686P3 Family ROM.

This SoftPaq is used to remotely flash the System ROM on target PCs on a network, 
and it requires System Software Manager (SSM) or Remote Management Setup.

The ROM Family and ROM date can be determined by running the Setup Utility by
pressing F10 on the target computer during system power on of the computer,
and viewing File/System Information.  This information can be saved into a text 
file by selecting File/Save to Diskette.

If you use System Software Manager (SSM) to deploy SoftPaqs within your
organization, you must upgrade to SSM version 1.50 (SP17447), which supports
all new and existing SoftPaq formats.  For information on SSM, check
"http://www.compaq.com/im/change/ssmwp.html.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP19582
SUPERSEDES: SP18872
PART NUMBER:  N/A
EFFECTIVE DATE: December 14, 2001
CATEGORY: ROMPaqs
SSM SUPPORTED: Yes

PRODUCT TYPE(S): Desktops
 
PRODUCT MODEL(S):
     Deskpro EN Series SFF: P1.13GHz (SFF-v) 
			    P1.0GHz (SFF-v) 
	    		    P933 (SFF-v) 
			    P866 (SFF-v) 
			    P800 (SFF-v) 
			    P733 (SFF-v) 
			    P667 (SFF-v)

OPERATING SYSTEM(S): 
     Microsoft Windows Millennium Edition (Me)
     Microsoft Windows 2000
     Microsoft Windows 98
     Microsoft Windows 95
     Microsoft Windows for Workgroups 3.11
     Microsoft Windows 3.1
     Microsoft Windows NT 4.0
     Microsoft Windows NT 3.51
     Microsoft Windows NT 3.1
     Microsoft MS-DOS
 
LANGUAGE(S): Global
 
ENHANCEMENTS:  
 - Adds a new option in F10 Setup to allow enabling or disabling of the Integrated
   audio when a second audio card is present.

FIXES:
 - Corrects a potential system lockup while using the Tracker 2000 mouse with 
   optical sensor.
 - Changes PCI memory mapping buffer to allow better usage of memory by add-in 
   devices.  This corrects an issue when using the nVidia Geforce3 video card.
 - Corrects an issue with remote wake-up when using an IBM 16/4 PCI management NIC 
   and Windows NT 4.0 operating system.
 - Corrects LED blink rate for ACPI S3 and S4 that were too fast on some systems.
 - Corrects a potential system lockup during POST when attempting to boot from the 
   integrated NIC first and F10 Setup options are set to enable POST messages.

PREREQUISITES: Compaq System Software Manager (SSM) or Remote Management Setup
 
HOW TO USE: 

1.  Download the SoftPaq to a directory on your hard drive.  The file
downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2.  Refer to the remote utility documentation for instructions on creating a
Remote ROM Flash job to flash the System ROM on target PCs on the network.

WARNING:  DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE
UPGRADE PROCESS!!!
  

Copyright (C)2001, Compaq Computer Corporation.  All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies