SOFTPAQ NUMBER: SP16517
PART NUMBER: N/A
FILE NAME: N/A
TITLE: Intel 3D Direct Graphics Video Driver for Windows NT 4.0
VERSION: 4.03.1381.2732 Rev P
LANGUAGE: US (Global)

CATEGORY: Display

DIVISIONS: Commercial Desktops

PRODUCTS AFFECTED: 
     Deskpro EN Series: C600,C667,C733,C850,P667,P733,P800,P866,P933,
         P1.0GHz,C566 (na),C667 (na),C733 (na),P667 (na),P733 (na)
     Deskpro EN Series SFF: P450+/810e,P500/810e,P533/810e,P600/810e,
         P667/810e,C600 (SFF),C667 (SFF),C733 (SFF),C850 (SFF),P667 (SFF),
         P733 (SFF),P800 (SFF),P866 (SFF),P933 (SFF),P1.0GHz (SFF),
         C566 (SFF-na),C667 (SFF-na),C733 (SFF-na),P667 (SFF-na),
         P733 (SFF-na)
     iPAQ: C500/810e,P500/810e,P733/810e,C700/815e,P866/815e
     Deskpro EX: C566,C600,C633,C667,C700,C850,P667,P733,P800,P866,P933,
         P1.0GHz
     Deskpro EXS: C566,C600,C633,C667,C700,P667,P733,P800,P866,P933,
         P1.0GHz
     Deskpro EP Series: C466/810,C500/810,P450+/810e,P500/810e,P533/810e,
         P600/810e,P667/810e
     Evo D300 Small Form Factor: Celeron 1.1G 815e Chipset, Celeron 1.0G 815e Chipset
     Evo D500 Small Form Factor: Celeron 1.1G 815e Chipset, Celeron 1.0G 815e Chipset
     Evo D500 Ultra-Slim Desktop:  All Celeron Models
     Evo D500 Ultra-Slim Desktop: All Models

OPERATING SYSTEM: Microsoft Windows NT 4.0 with Service Pack 4 or later 

SYSTEM CONFIGURATION:
     Intel 82810 Graphics Controller
     Intel 82810-DC100 Graphics Controller
     Intel 82810E Graphics Controller (DC 133)
     Intel 82815 Graphics Controller

PREREQUISITES: 
- The system must contain one of the following Intel platforms:

  Intel(R) 810  Chipset
  Intel(R) 810E Chipset
  Intel(R) 815  Chipset
  Intel(R) 815E Chipset

- The software should be installed on systems with at least 64 MB of 
  system memory.

- There should be sufficient hard disk space in the <TEMP> directory 
  (typically C:\TEMP) on the system to install this software.

- The drivers included with this distribution package are designed to 
  function with Microsoft Windows NT 4.0 with Service Pack 4 or later 
  installed.

EFFECTIVE DATE: April 17, 2002

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.0

SUPERSEDES:  SP15415

DESCRIPTION: This SoftPaq contains the Windows NT 4.0 graphics driver for the 
Intel 3D Direct Graphics chipset that ships with the Compaq products listed 
above.

ENHANCEMENTS/FIXES:
 - Enhances functionality to detect CRTs.
 - Adds support for low resolution overlay and HW cursor.
 - Changes VBIOS DD centering model to check for supported modes.
 - Supports user definable optimal refresh rate.
 - Removes I420 and IYUV four CC codes from PRD and DDraw.
 - Fixes issue with AVI not responding when screen saver (3d flower box) is selected.

NOTE: The Application Exception Error that can result when closing Quicktime
      Version 4.1.2 or Beta Version 5.0 is fixed by SoftPaq SP16774 
      (Driver Version 4.03.1381.2656 Rev A), NOT by this SoftPaq (SP16517).

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions.

3. After the files have been unpacked, you may delete the self-extracting
file downloaded in step 1.

4. To install, execute SETUP.EXE.

5. After the installation is completed, you may delete the directory
created in step 2 if you wish.

Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies