SOFTPAQ NUMBER:  SP10069
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Workstation Support Software for Microsoft Windows NT 4.0
	(All component drivers)
VERSION:  2.04 Rev A
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  All Compaq Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  May 11, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP9630

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description 
file and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Workstation Support Software for 
Microsoft Windows NT 4.0 that supports the following subsystems and 
features of Compaq Professional Workstations:

Array Controllers
    Compaq SMART-2DH Array Controller
    Compaq SMART-2/P and Compaq SMART-2/E
    Compaq SMART-2SL Array Controller
    Compaq Smart Array 221 Controller
SCSI Controllers	
    Adaptec AIC-78xx PCI SCSI Controller
    ATAPI/IDE Controller
    Compaq Dual Channel Integrated Wide-Ultra SCSI-3 Controller
    Compaq Wide-Ultra SCSI-3 Controller (formerly named the 32-Bit Wide-Ultra SCSI-2/P)
    Fast-SCSI-2 Controller
    Integrated 32-Bit Fast-SCSI-2/P Controller
    Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    Integrated Wide-Ultra SCSI Controller
Network Interface Controllers
    Compaq NC3161 Fast Ethernet NIC
    Compaq NC3131 Fast Ethernet NIC
    Compaq NC3121 Fast Ethernet NIC
    Compaq NC3120 Fast Ethernet NIC
    Compaq NC1120 Fast Ethernet NIC
    Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    Compaq Netelligent 10 T PCI UTP Controller
    Compaq Netelligent 10/100 TX PCI UTP Controller
    Compaq Netelligent Dual 10/100 TX PCI UTP Controller
    Compaq NetFlex-3/P Controller
    Compaq NetFlex-3/E Controller
    Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller
    Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller
    Compaq Netelligent 10/100 TX Embedded UTP Controller
    Compaq NetFlex-3 Embedded Controller
Network Module Upgrade Option
    100 VG Module
    10/100 TX Module
    100 Base-FX Module
    Compaq NC3132 Fast Ethernet Module
    Compaq NC3133 Fast Ethernet Module
    Compaq NC6132 Gigabit Module
    Compaq NC6133 Gigabit Module
Audio
     ESS 1868/1869 AudioDrive Controller
Video
     Compaq PowerStorm 300 Graphics Controller
     Compaq PowerStorm 600 Graphics Controller
     Diamond Multimedia Fire GL 4000 Graphics Controller
     ELSA GLoria-L Graphics Controller
     ELSA GLoria-XL Graphics Controller
     ELSA GLoria Synergy Graphics Controller
     ELSA GLoria Synergy+ Graphics Controller
     Matrox Millennium II PCI/Millennium G200 PCI/Millennium 
	G200 AGP/Productiva G100 MMS Graphics Controllers
     Matrox MGA Millennium Graphics Controller
Utilities
    Compaq Advanced Network Control Utility
    Compaq Array Configuration Utility
Other
    Compaq ProLiant Storage Systems
    System Health Logs (on the Compaq Professional Workstation 
	5000, 5100, 6000, 8000, and AP400)
    Compaq CD-ROM Drives
    Logitech Mouse


Enhancements/Fixes:

Features in Compaq Workstation SSD for Windows NT 4.0 Version 2.04 Rev. A

The release of the Compaq Workstation Support Software for Microsoft 
Windows NT 4.0, Version 2.04 Revision A, primarily supports the following 
new products:

·	Compaq PowerStorm 600 Graphics Controller
·	Compaq Smart Array 221 Controller
·	Compaq NC3131 Fast Ethernet NIC
·	Compaq NC3132 Fast Ethernet Module
·	Compaq NC3133 Fast Ethernet Module
·	Compaq NC6132 Gigabit Module
·	Compaq NC6133 Gigabit Module

Compaq PowerStorm 600 Graphics Controller (GLZMPD.SYS) (Sp700 Only)

·	Added support for the new Compaq PowerStorm 600 Graphics 
	Controller Driver Version 04.06.01.44.

Important:  You must install Microsoft Windows NT Service Pack 4 before 
you install the Compaq PowerStorm 600 Graphics Controller Driver.

Matrox Productiva G100 MMS Graphics Controllers (MGA64.SYS)

·	Updated the Matrox Productiva G100 MMS Graphics Controller Driver 
	to Version 4.00 (build 4.06.023).
·	Added support for the Matrox Productiva G100 Multi-Monitor Series 
	Graphics Controller. 

Important:  You must install Microsoft Windows NT Service Pack 3 (or higher) 
before you install the Matrox Productiva G100 Multi-Monitor Series Graphics 
Controller Driver.

Matrox MGA Millennium Graphics Controller (MGA64.SYS)

·	Added support for the Matrox MGA Millennium / Millennium II PCI/
	Millennium G200 PCI/Millennium G200 AGP/ Graphics Controller 
	Driver Version 4.00 (build 3.60.116). 

Compaq PowerStorm 300 Graphics Controller (PBXGDAC.SYS)

·	Updated the Compaq PowerStorm 300 Graphics Controller Driver from 
	Version 2, 2, 1107, 1219 to 2, 2, 0211, 1434. 

Important:  You must install Microsoft Windows NT Service Pack 3 (or higher) 
before you install the Compaq PowerStorm 300 Graphics Controller Driver.

Compaq SMART Array/SMART-2 Array/Smart Array 221 Controller Driver 
(CPQARRAY.SYS)

·	Updated the Compaq SMART Array/SMART-2 Array/Smart Array 221 
	Controller Driver from Version 4.01.03.30 to 4.01.03.36.
·	Added support for the new Compaq Smart Array 221 Controller.

Compaq Ethernet, Fast Ethernet, or Gigabit Controller(s) (N100NT.SYS) 

·	Updated the Compaq Ethernet, Fast Ethernet, or Gigabit Controller(s) 
	Driver from Version 3.08.00.0004 to 4.29.01.0008.
·	Added support for the following Compaq Fast Ethernet or Gigabit 
	Controllers:
·	Compaq NC3131 Fast Ethernet NIC
·	Compaq NC3132 Fast Ethernet Module
·	Compaq NC3133 Fast Ethernet Module
·	Compaq NC6132 Gigabit Module
·	Compaq NC6133 Gigabit Module

Compaq Array Configuration Utility (CPQACU.EXE) 

·	Updated the Compaq Array Configuration Utility from Version 2.00 
	to 2.20.
·	Added support for the new Compaq Smart Array 221 Controller.

Compaq Advanced Wake-on-LAN Driver (CPQAWOL.SYS) 

·	Added support for the new Compaq Advanced Wake-on-LAN Driver 
	Version 1.01.

Compaq Remote ROM Flash and Security Settings Service (CPQRS.SYS)

·	Updated the Compaq Remote ROM Flash and Security Settings Service 
	Driver from Version 1.04 to 1.05.
·	Fixed a problem on the Compaq Professional Workstation AP200, AP500, 
	and SP700 with Remote Security fails when DMI Agents are installed.

ATAPI/IDE Controller Driver (CPQATAPI.SYS) 

·	Updated the ATAPI/IDE Controller Driver to correct an MSATAPI driver 
	configuration problem on workstations with Microsoft Windows NT 
	Service Pack 3 (or higher) installed and on workstations with 
	ATAPI/IDE Controllers greater than 8.4 GB. The problem is corrected 
	automatically when you run the Workstation SSD for Windows NT Setup 
	program.
·	The ATAPI/IDE Controller Driver cannot be installed if the 
	workstation has Microsoft Windows NT Service Pack 4 installed. Also, 
	the driver cannot be installed if the workstation has Microsoft 
	Windows NT Service Pack 3 installed and has an ATAPI/IDE Controller 
	greater than 8.4 GB.

Important:  The ATAPI/IDE Controller Driver is not supported on the Compaq 
Professional Workstation SP700. If you used Compaq Workstation Support 
Software for Microsoft Windows NT 4.0 Version 2.00A or 2.01A with a 
Professional Workstation SP700 configured with an ATAPI/IDE Controller, 
run the Compaq Workstation Support Software for Microsoft Windows NT 4.0 
Version 2.04A Setup program to disable the CPQATAPI.SYS driver and enable 
the MSATAPI.SYS driver included in Microsoft Windows NT Service Pack 3 
(or higher).

For details, refer to NTREADME.HLP in the created support files.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTWSD.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTWSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.