SOFTPAQ NUMBER: N/A
PART NUMBER: N/A
FILE NAME: aic7xxx-6.3.11-7.rhel4.x86_64.dd.gz
TITLE: Driver diskette for 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller (AMD64/EM64T) for Red Hat Enterprise Linux 4 (AMD64/EM64T)
VERSION: 6.3.11-7
LANGUAGE: English
CATEGORY: Driver Diskettes
DIVISION: N/A
OPERATING SYSTEM: Red Hat Enterprise Linux 4 (AMD64/EM64T)
EFFECTIVE DATE: Mar 8,2007
ELECTRONIC DISTRIBUTION ALLOWED: Yes
SOFTPAQ UTILITY VERSION: N/A
SUPERSEDES: N/A
DESCRIPTION:
This driver diskette image provides the binary driver module pre-built
for Red Hat Enterprise Linux 4 to enable the
HP Prolaint 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller.
Using this driver diskette at Red Hat Enterprise Linux 4 installation time allows
the most up-to-date driver version included in the diskette to be used,
rather than the default driver version contained in the
Red Hat Enterprise Linux 4 installation CD.
FIXES
ENHANCEMENTS
The kernels of Red Hat Enterprise Linux 4 (AMD64/EM64T) supported by this driver diskette are:
2.6.9-5.EL - Red Hat Enterprise Linux 4 (AMD64/EM64T)
2.6.9-11.EL - Red Hat Enterprise Linux 4 Update 1 (AMD64/EM64T)
2.6.9-22.EL - Red Hat Enterprise Linux 4 Update 2 (AMD64/EM64T)
2.6.9-34.EL - Red Hat Enterprise Linux 4 Update 3 (AMD64/EM64T)
2.6.9-42.EL - Red Hat Enterprise Linux 4 Update 4 (AMD64/EM64T)
INSTALLATION
To install Linux using this "ProLiant Red Hat Enterprise Linux 4" Driver Diskette,
boot your Linux machine with your Red Hat Enterprise Linux 4 CD1 in
your CD-ROM Drive.
A menu will be displayed, prompting for your input. Type the following
line of code to inform the operating system of the diskette:
# linux dd
Red Hat Enterprise Linux 4 will prompt for the Updates Diskette and the ProLiant
Red Hat Enterprise Linux 4 Driver Diskette during the installation procedure.
NOTES
CREATING A DRIVER DISKETTE
There are two methods to create the Installation Diskette:
MAKING A DISKETTE UNDER MS-DOS:
1) Save the "aic7xxx-6.3.11-7.rhel4.x86_64.dd.gz" file into a temporary directory.
Use WINZIP to extract "aic7xxx-6.3.11-7.rhel4.x86_64.dd"
from this file into the same directory.
Please ensure that "aic7xxx-6.3.11-7.rhel4.x86_64.dd" is a DOS 8.3 name.
2) Use the "rawrite" utility which is included on the Red Hat Enterprise Linux 4 CD in the "dosutil" directory.
3) Label a blank, formatted 3.5-inch diskette as "ProLiant Red Hat Enterprise Linux 4 Driver Diskette".
Next, insert the diskette in the diskette drive. Then, use the following commands
(assuming your ProLiant Disk Image is at the location c: and your CD-ROM is drive d:)
C:\> d:\dosutils\rawrite
Enter disk image source file name: aic7xxx-6.3.11-7.rhel4.x86_64.dd
Enter target diskette drive: a:
Please insert a formatted diskette into drive A: and press --ENTER-- : Enter
MAKING A DISKETTE UNDER A LINUX-LIKE OS:
1) Save the "aic7xxx-6.3.11-7.rhel4.x86_64.dd.gz" file into a temporary directory. Use GUNZIP to extract
"aic7xxx-6.3.11-7.rhel4.x86_64.dd" from this file into the same directory
2) To make a diskette under Linux (or any other Linux-like operating system), you must have permission to write
to the device representing a 3.5-inch diskette drive (known as /dev/fd0 under Linux)
3) First, label a blank, formatted diskette appropriately (ProLiant Red Hat Enterprise Linux 4 Driver Diskette). Insert the diskette
into the floppy drive, but DO NOT issue the mount command:
# dd if=aic7xxx-6.3.11-7.rhel4.x86_64.dd of=/dev/fd0 bs=1440k
4) This command creates a diskette containing the image of the input file (if=aic7xxx-6.3.11-7.rhel4.x86_64.dd) to an
output file (of=/dev/fd0) using the diskette size of 1440k (1.44MB). To make another diskette label that diskette,
and run "dd" again, specifying the correct input file.
MD5SUM: 3b0ab235f233f002299ae57a18ebb5b8
Customer Service
----------------
For support, please send email to contact.hp@hp.com.
Copyright 2002-2007 Hewlett-Packard Development Company, L.P. Product names
mentioned herein may be trademarks and/or registered trademarks of their
respective companies.