C O M P A Q (R) C O M P U T E R C O R P O R A T I O N

Compaq Support Paq for
Microsoft Windows 2000

1. INTRODUCTION

This file contains information regarding use of the Compaq Support Paq for
Microsoft Windows 2000. The following information is provided:

Support Paq Installation
Component Usage
Log File Usage

2. SUPPORT PAQ INSTALLATION

The primary method for installing the Support Paq is to run the SETUP.EXE
program included with the Support Paq. By default, all software is selected
for installation. In most circumstances, this default selection should not be
altered, and installation is as simple as pressing the "Install" button. Even
when selected, only software that is appropriate for the system it is being run
on will actually be installed. Press the "Install" button to proceed with the
installation. After installation of the appropriate software the utility will
display its results, including indication of software successfully installed,
software not needed for the current system configuration and any installation
failures. For more information on the usage of SETUP.EXE, refer to the help
file (SETUP.HLP).

A BP000052.CMD file is also provided with the Support Paq for use
in installing the Support Paq from a command prompt without user interaction.
As with the SETUP.EXE program, all software appropriate for the system it is
being run on will be installed.

The Compaq Support Paq for Microsoft Windows 2000 contains numerous files. All
files must be present in the same directory as the SETUP.EXE program or in
order for the Support Paq to be installed properly.

A console version of the setup application (SETUPC.EXE) is also provided as a
way to script installations of the Support Paq or components. For more
information on its usage, refer to the help file (SETUPC.HLP).

3. COMPONENT USAGE

In addition to the SETUP.EXE program mentioned above, the Support Paq contains
individual .EXE files corresponding to the various components that make up the
Support Paq. If necessary, these components can be installed individually or
their contents extracted to a floppy diskette for use during OS installation.

To install an individual component just run the appropriate CPxxxxx.EXE file
and chose the "Install" button.

To extract the contents of a component to diskette run the appropriate
CPxxxxx.EXE file, then chose the "Extract" button instead of the "Install"
button.

The following table specifies the Compaq software contained within and
installed by each component.

cp001066.exe Compaq Advanced System Management Controller Driver for Windows 2000
cp001067.exe Compaq System Management Controller Driver for Windows 2000
cp001068.exe Compaq Integrated System Management Controller Driver for Windows 2000
cp000766.exe Compaq Drive Array Driver for Windows 2000
cp001070.exe Compaq Smart Array-2 Controllers Driver for Windows 2000
cp001071.exe Compaq 32-Bit SCSI Controller Driver for Windows 2000
cp001073.exe Compaq 64-Bit/66-Mhz Dual Channel Wide Ultra3 SCSI Controller Driver for Windows 2000
cp001072.exe Compaq Smart Array 5x Controller Driver For Windows 2000
cp001074.exe Compaq StorageWorks Fibre Channel Support for Windows 2000
cp000772.exe Compaq CMD 0649 IDE Ultra DMA Controller Driver For Windows 2000
cp001091.exe Compaq Integrated Ultra ATA-100 Dual Channel Driver For Windows 2000
cp001151.exe Compaq ProLiant Storage System Driver for Windows 2000
cp000774.exe Compaq Drive Array Notification for Windows 2000
cp000775.exe Compaq Remote Monitor Service for Windows 2000
cp001079.exe Compaq PCI Hot Plug Controller Driver for Windows 2000
cp000777.exe Compaq Integrated Management Display Utility for Windows 2000
cp000778.exe Compaq Integrated Management Log Viewer for Windows 2000
cp000779.exe Compaq Power Supply Viewer for Windows 2000
cp000780.exe Compaq Power Down Manager for Windows 2000
cp000781.exe Compaq Enhanced Integrated Management Display Service for Windows 2000
cp001085.exe Compaq Array Configuration Utility for Windows 2000
cp000784.exe Compaq Remote Insight Board Driver for Windows 2000
cp000783.exe Compaq ATI RAGE IIC Video Controller Driver for Windows 2000
cp000785.exe Compaq Array Redundancy Software for Windows 2000
cp001130.exe Compaq Integrated ATA RAID Management Utility
cp001146.exe Compaq NetFlex/Netelligent Adapter Driver for Windows 2000
cp001144.exe Compaq Ethernet or Fast Ethernet NIC Driver for Windows 2000
cp000808.exe Compaq Gigabit Ethernet NIC Driver for Windows 2000
cp001143.exe Compaq Network Teaming and Configuration for Windows 2000
cp001115.exe Compaq Foundation Agents for Windows
cp001116.exe Compaq Server Agents for Windows
cp001118.exe Compaq Storage Agents for Windows
cp001117.exe Compaq NIC Agents for Windows
cp001119.exe Compaq Survey Utility for Windows

4. LOG FILE USAGE

Progress and results of the installation of all software included in the Support
Paq is logged to the file %SystemDrive%\cpqsystem\log\cpqsetup.log. This file can be
viewed with any text editor. Information for subsequent installations is
appended to this log file, providing a chronological history of installation
activity for all software installed by the Support Paq installation utilities.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.